Actual offers of Wheel nuts FORD Focus Mk2 Estate (DA_, FFS, DS) 1.8 TDCi 115 hp Diesel KKDA
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 10
- Surface: Chromed
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,060
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with lid
- Rims: for light alloy rims, for steel rims
- Material: Steel
- Diameter [mm]: 28
- Internal Thread Size: M12 x 1,5
- Item number: 50 92 9463
- Manufacturer: SWAG
- EAN number: 4044688294630
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Thread Size: M12 x 1,5
- Height [mm]: 31
- Item number: 83058
- Manufacturer: 3RG
- EAN number: 224598102946231029462
- Condition: New
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M 12 x 1,5
- Thickness [mm]: 27,5
- Quality / Grade: 8
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,052
- Packaging width [cm]: 3
- Packaging height [cm]: 3
- Packaging Depth [cm]: 3
- Item number: V25-1752
- Manufacturer: VAICO
- EAN number: 4046001637216
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Required quantity: 20
- Engine Code: 1,8
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,06
- Packaging width [cm]: 1,87
- Packaging height [cm]: 3,03
- Packaging Depth [cm]: 2,78
- Item number: V25-0974
- Manufacturer: VAICO
- EAN number: 4046001748868
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
![OP-UWN10029-1 Wheel nuts Ford FOCUS 1.8TDCi 115 hp 85 kW KKDA 2008 DA_, FFS, DS](https://cdn.autodoc.de/brands/thumbs/129.png?m=0)
-
- Rims: for light alloy rims
- Production date from: 03.12.07
- Production date to: 01.09.09
- Rim Size [inch]: 16.0
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Zink-nickel coated
- Bolt Head- / Nut Design: Male Hex
- Material: Steel
- Height [mm]: 26
- Diameter [mm]: 28
- Internal Thread Size: M12x1,5
- Item number: OP-UWN10029-1
- Manufacturer: OPTIMAL
- EAN number: 4058787353020
- Condition: New
-
- Required quantity: 20
- Shape: arched
- Supplementary Info: Original VAICO Quality
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Quality / Grade: 8
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,0567
- Packaging width [cm]: 2,8
- Packaging height [cm]: 2,8
- Packaging Depth [cm]: 3
- Item number: V25-0590
- Manufacturer: VAICO
- EAN number: 4046001569135
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Angle [°]: 60
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Thread Size: M12
- Bolt Head- / Nut Design: Hexagon
- Rims: for steel rims
- Thread Pitch [mm]: 1.5
- Height [mm]: 17
- Item number: YFOD60FB
- Manufacturer: BIMECC
- EAN number: 8058983450369
- Condition: New
![OP-UWN10003-20 Wheel nuts Ford FOCUS 1.8TDCi 115 hp 85 kW KKDB 2011 DA_, FFS, DS](https://cdn.autodoc.de/brands/thumbs/129.png?m=0)
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Zink flake coated
- Bolt Head- / Nut Design: Male Hex
- Rims: for steel rims
- Material: Steel
- Height [mm]: 15
- Diameter [mm]: 20,91
- Internal Thread Size: M12x1,5
- Item number: OP-UWN10003-20
- Manufacturer: OPTIMAL
- EAN number: 4058787353358
- Condition: New
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Chromed
- Bolt Head- / Nut Design: Male Hex
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with lid
- Material: Steel
- for OE number: 1 678 260
- Fabrication Number: KSP-FR-000
- Item number: KSP-FR-000
- Manufacturer: NTY
- EAN number: 590204811936
- Condition: New
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 26
- Quality / Grade: 8
- Surface: Chromed
- Weight [kg]: 0,26
- Material: Steel
- Diameter [mm]: 23,7
- for OE number: M115
- Internal Thread Size: M12 x 1,5
- Lockable: Lockable
- Item number: 81 92 7057
- Manufacturer: SWAG
- EAN number: 4044688540966
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
![OP-UWN10001-20 Wheel nuts Ford FOCUS 1.8TDCi 115 hp 85 kW KKDA 2005 DA_, FFS, DS](https://cdn.autodoc.de/brands/thumbs/129.png?m=0)
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Quality / Grade: 10
- Surface: Chrome-(VI)- free passivation
- Bolt Head- / Nut Design: Male Hex
- Rims: for light alloy rims
- Material: Steel
- Height [mm]: 30
- Diameter [mm]: 28
- Internal Thread Size: M12x1,5
- Item number: OP-UWN10001-20
- Manufacturer: OPTIMAL
- EAN number: 4058787353334
- Condition: New
- Thickness [mm]: 26
- Diameter [mm]: 23,7
- Internal Thread Size: M12 x 1,5
- Quality / Grade: 8
- Spanner Size: 17, 19
- Wheel Fastening: Conical Seat F
- Material: Steel
- Surface: Chromed
- Fitting Position: Front Axle, Rear Axle
- Weight [kg]: 0,26
- Lockable: Lockable
- for OE number: M115
- Item number: 27057
- Our price: 23,83 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816270577
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 15
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,025
- Rims: for steel rims
- Material: Steel
- Internal Thread Size: M12 x 1,5
- Item number: 50 91 9701
- Manufacturer: SWAG
- EAN number: 4044688197016
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Thread Size: M12 x 1,5
- Height [mm]: 15
- Item number: 83059
- Manufacturer: 3RG
- EAN number: 221122410294635102946
- Condition: New
-
- Production date from: 200712
- Production date to: 201107
- for model code: CB4
- Thread Size: M12x1,5
- Weight [kg]: 0,2
- Packaging length [cm]: 1,9
- Packaging width [cm]: 1,9
- Packaging height [cm]: 1,5
- Item number: 2185-001
- Manufacturer: FEBEST
- EAN number: 224674192067971920679
- Condition: New
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 15
- Quality / Grade: 8
- Surface: Zinc-coated
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,025
- Rims: for steel rims
- Material: Steel
- Internal Thread Size: M12 x 1,5
- Item number: 19701
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816197010
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 15
- Quality / Grade: 8
- Surface: Phosphatized
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,021
- Rims: for steel rims
- Material: Steel
- Internal Thread Size: M12 x 1,5
- Item number: 03452
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816034520
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Spanner Size: 19
- Wheel Fastening: Conical Seat F
- Fitting Position: Front Axle, Rear Axle
- Thickness [mm]: 15
- Quality / Grade: 8
- Surface: Phosphatized
- Bolt Head- / Nut Design: Male Hex
- Weight [kg]: 0,021
- Rims: for steel rims
- Material: Steel
- Internal Thread Size: M12 x 1,5
- Item number: 50 90 3452
- Manufacturer: SWAG
- EAN number: 4044688034526
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
-
- Required quantity: 20
- Engine Code: * 1.8 *
- Rims: for light alloy rims
- Shape: arched
- Spanner Size: 19
- Internal Thread [mm]: M12 x 1,5
- Wheel Fastening: Conical Seat F
- Fitting Position: Rear Axle, Front Axle
- Thickness [mm]: 31
- Bolt Head- / Nut Design: Male Hex
- Weight [kg] 0
- Supplementary Article / Supplementary Info Info 2: with lid
- Component Number: BSG 30-230-024
- Item number: BSG 30-230-024
- Manufacturer: BSG
- EAN number: 8719822015674
- Condition: New
-
- Production date from: 200712
- for model code: CB4
- Weight [kg]: 0,056
- Height [mm]: 31
- Packaging length [cm]: 3,1
- Packaging width [cm]: 3,1
- Packaging height [cm]: 2,6
- Item number: 2185-002
- Manufacturer: FEBEST
- EAN number: 224674192067981920679
- Condition: New
- 1
- 2
- 3