Actual offers of Wheel hub FIAT Ducato II Minibus (244) 2.3 JTD 126 hp Diesel F1AE0481T
-
- Fitting Position: Front Axle
- Payload [kg]: 1000, 1400
- Fitting Position: Front axle both sides
- Height 1 [mm]: 48
- Diameter [mm]: 84
- Weight [kg]: 0,58
- Inner Diameter 2 [mm]: 49
- Packing Type: Box
- Item number: 654W0090
- Manufacturer: RIDEX
- EAN number: 4059191321001
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: with grease cap, with retaining ring
- Diameter [mm]: 90
- Width [mm]: 60
- Weight [kg]: 1,62
- Payload [kg]: 1800
- Item number: 654W0438
- Manufacturer: RIDEX
- EAN number: 4059191160532
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 126
- Number of Holes: 5
- Width [mm]: 99,5
- Diameter [mm]: 55, 156
- Item number: 10L9118-JPN
- Manufacturer: JPN
- EAN number: 226985197322371973223
- Condition: New
-
- Payload [kg]: 1800
- Country Specific Design: Russia
- Model Year to: 2011
- Fitting Position: Front Axle
- Bolt Hole Circle Ø [mm]: 126
- Number of Holes: 5
- Weight [kg]: 3,26
- Width [mm]: 99,5
- Diameter [mm]: 156, 55
- Internal Thread Size: M16 x 1,5
- Item number: 29SKV581
- Manufacturer: ESEN SKV
- EAN number: 5903968478056
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front axle both sides
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 126
- Number of Holes: 5
- Weight [kg]: 3,415
- Width [mm]: 99,5
- Diameter [mm]: 156, 55
- Thread Size: M16 x 1,5
- Packaging width [cm]: 16,75
- Packaging height [cm]: 19,25
- Packaging Depth [cm]: 11
- Item number: V24-0461
- Manufacturer: VAICO
- EAN number: 4046001610837
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Payload [kg]: 1800
- Country Specific Design: Russia
- Model Year to: 2011
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 126
- Number of Holes: 5
- Weight [kg]: 3,26
- Width [mm]: 99,5
- Diameter [mm]: 156, 55
- for OE number: 1346652080
- Internal Thread Size: M16 x 1,5
- Item number: 28232
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816282327
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Payload [kg]: 1800
- Country Specific Design: Russia
- Model Year to: 2011
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Bolt Hole Circle Ø [mm]: 126
- Number of Holes: 5
- Weight [kg]: 3,26
- Width [mm]: 99,5
- Diameter [mm]: 156, 55
- Internal Thread Size: M16 x 1,5
- Item number: 70 92 8232
- Manufacturer: SWAG
- EAN number: 4044688282323
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Diameter [mm]: 139
- Weight [kg]: 3,02
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 113,5
- Item number: 29SKV343
- Manufacturer: ESEN SKV
- EAN number: 2249692934300
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload [kg]: 1000, 1400
- Fitting Position: Front axle both sides
- Height 1 [mm]: 48
- Diameter [mm]: 84
- Weight [kg]: 0,58
- Inner Diameter 2 [mm]: 49
- Packing Type: Box
- Item number: SKWB-0180089
- Manufacturer: STARK
- EAN number: 4059191030408
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 49
- Diameter [mm]: 84
- Width [mm]: 48
- Item number: 681375
- Manufacturer: OPTIMAL
- EAN number: 4031185042598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: with grease cap, with retaining ring
- Diameter [mm]: 90
- Width [mm]: 60
- Weight [kg]: 1,62
- Payload [kg]: 1800
- Item number: SKWB-0180573
- Manufacturer: STARK
- EAN number: 4059191091898
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 49,0
- Diameter [mm]: 84,0
- Width [mm]: 48,0
- Item number: 10L9100-JPN
- Manufacturer: JPN
- EAN number: 226985180769791807697
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload [kg]: 1000, 1400
- Height 1 [mm]: 48
- Diameter [mm]: 84
- Weight [kg]: 0,58
- Inner Diameter 2 [mm]: 49
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 15
- Packaging height [cm]: 11,5
- Item number: FI-WB-11424
- Manufacturer: MOOG
- EAN number: 4044197605637
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: EXPERT KITS +
- Fitting Position: Front Axle
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: without integrated magnetic sensor ring
- for OE number: 3326,71
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 90
- Width [mm]: 60,0
- Weight [kg]: 1,744
- Packaging width [cm]: 9,6
- Packaging height [cm]: 9,8
- Packaging Depth [cm]: 9,8
- Item number: V22-1056
- Manufacturer: VAICO
- EAN number: 4046001518867
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Payload [kg]: 1800
- Height 1 [mm]: 60
- Diameter [mm]: 90
- Weight [kg]: 1,67
- Inner Diameter 2 [mm]: 55
- Packing Type: Box
- Packaging length [cm]: 14,5
- Packaging width [cm]: 14,5
- Packaging height [cm]: 9,5
- Item number: CI-WB-11425
- Manufacturer: MOOG
- EAN number: 4044197603992
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Payload [kg]: 1800
- not manufactured in: Russia
- developed in: Russia
- not for country specific design: Russia
- not for vehicle production country: Russia
- Engine production country: Russia
- Country Specific Design: Russia
- Vehicle Production Country: Russia
- quality-tested in: Russia
- Manufactured in: Russia
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 55,0
- Diameter [mm]: 90,0
- Width [mm]: 60,0
- Item number: 10L9115-JPN
- Manufacturer: JPN
- EAN number: 226985180769891807698
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Country Specific Design: Russia
- Model Year to: 2011
- Supplementary Article / Supplementary Info: with axle nut
- Inner Diameter [mm]: 42
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Diameter [mm]: 75
- Width [mm]: 60
- Weight [kg]: 1,31
- Bearing Type: Angular Ball Bearing
- Item number: 43506
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816435068
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Inner Diameter [mm]: 55
- Supplementary Article / Supplementary Info Info 2: with grease cap, with retaining ring
- Diameter [mm]: 90
- Width [mm]: 60
- Weight [kg]: 1,62
- Payload [kg]: 1800
- Item number: 24521
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816245216
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with axle nut
- Inner Diameter [mm]: 49
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- for OE number: 16 063 750 80
- Diameter [mm]: 84
- Width [mm]: 48
- Weight [kg]: 1,000
- Bearing Type: Tapered Roller Bearing
- Item number: 24519
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816245193
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Country Specific Design: Russia
- Model Year to: 2011
- Supplementary Article / Supplementary Info: with axle nut
- Inner Diameter [mm]: 42
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Diameter [mm]: 75
- Width [mm]: 60
- Bearing Type: Angular Ball Bearing
- Item number: 70 94 3506
- Manufacturer: SWAG
- EAN number: 4044688435064
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3