Actual offers of Wheel spacers FORD Focus Mk1 Saloon (DNW) 1.8 16V 115 hp Petrol EYDL

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

18.) These spacers without a double-sided centering are DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing only useable for cars with a sufficient length of the sealed watertight by mounting the spacers. technical notes! centering to be able to center the wheels enough despite knurl bolts with the approprirate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should the spacer. the be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

DRS = The fitting of the DRS-System requires the exchange note 18/18b Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing sealed watertight by mounting the spacers. technical notes! Vehicle Order-no. Technical requirements

knurl bolts with the approprirate longer H&R knurl bolts.

The longer H&R knurl bolts are supplied. The wheels should ALFA ROMEO/FIAT/LANCIA 20145802 Wheel hub length at the the be fitted using the existing wheel nuts provided with car max. 11 mm. the wheels. All fixing-accessories are included! ALFA ROMEO/FIAT/LANCIA 24145802 Wheel hub length at the car max. 13 mm ALFA ROMEO/FIAT/LANCIA 20135580 Wheel hub length at the car max. 10,5 mm. ALFA ROMEO/FIAT/LANCIA 24135580 Wheel hub length at the car max. 12,5 mm. AUDI/SEAT/SKODA/VW 162345712 Only for rim with inner bavel mind. 7x45° Wheel hub length at the car max. 14 mm. AUDI/SEAT/SKODA/VW 202345714 Only for rim with inner bavel mind. 7x45° Wheel hub length at the car max. 16 mm. AUDI/SEAT/SKODA/VW 24234571 Only for rim with inner bavel mind. 7x45° Wheel hub length at the car max. 18 mm. AUDI/SEAT/SKODA/VW 162555716 Only for rim with inner bavel mind. 7x45° Wheel hub length at the car max. 14 mm. AUDI/SEAT/SKODA/VW 202555712A Only for rim with inner bavel mind. 7x45° Wheel hub length at the car max. 16 mm. AUDI/SEAT/SKODA/VW 202555712B Only for rim with inner bavel mind. 5x45° Wheel hub length at the car max. 14 mm. AUDI/SEAT/SKODA/VW 24255571 Only for rim with inner bavel mind. 5x45° Wheel hub length at the car max. 15 mm. AUDI/SEAT/SKODA/VW 2055571A Only for rim with inner bavel mind. 6,5x45° Wheel hub length at the car max. 15,5 mm. AUDI/SEAT/SKODA/VW 2055571B Only for rim with inner bavel mind. 4x45° Wheel hub length at the car max. 12 mm. AUDI/SEAT/SKODA/VW 2455571 Only for rim with inner bavel mind. 5x45° Wheel hub length at the car max. 15 mm. BMW 2075725 Wheel hub length at the car max. 12 mm BMW 2475725 Wheel hub length at the car max. 12 mm BMW 5/D (E39) 2075740 Wheel hub length at the car max. 11 mm. BMW 5/D (E39) 2475740 Wheel hub length at the car max. 12 mm. CITROEN/PEUGEOT/VOLVO 2034650 Wheel hub length at the car max. 11 mm. CITROEN/PEUGEOT/VOLVO 2434650 Wheel hub length at the car max. 12 mm. CITROEN/PEUGEOT/VOLVO 2035650 Wheel hub length at the car max. 11 mm. CITROEN/PEUGEOT/VOLVO 2435650 Wheel hub length at the car max. 10 mm. DaimlerChrylser/MERCEDES 2055665 Wheel hub length at the car max. 9 mm. DaimlerChrylser/MERCEDES 2455665 Wheel hub length at the car max. 10 mm. HONDA 20245616 Wheel hub length at the car max. 10 mm. HONDA 2064640 Wheel hub length at the car max. 11 mm. HONDA 2065640 Wheel hub length at the car max. 11 mm HONDA 2065700 Wheel hub length at the car max. 11 mm HYUNDAI/TOYOTA 20245414 Wheel hub length at the car max. 11 mm MAZDA 20245410 Wheel hub length at the car max. 11 mm MAZDA 202454101 Wheel hub length at the car max. 11 mm NISSAN 2065662 Wheel hub length at the car max. 9,5 mm TOYOTA 2025541 Wheel hub length at the car max. 10 mm TOYOTA 20656014 Wheel hub length at the car max. 11 mm RENAULT 20365601 Wheel hub length at the car max. 11 mm VW Käfer 2094786 Wheel hub length at the car max. 11 mm

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing sealed watertight by mounting the spacers. technical notes! knurl bolts with the approprirate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should the be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

3.) All DR-Systems require longer wheel-bolts. These have DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing sealed watertight by mounting the spacers. technical notes! to be knurl bolts with the approprirate longer H&R knurl bolts. ordered separately. When ordering wheel-bolts please follow The longer H&R knurl bolts are supplied. The wheels should the be fitted using the existing wheel nuts provided with these guidelines: If possible name the type of the wheel when ordering. the wheels. All fixing-accessories are included! New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm, for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be of sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be of sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be of sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).