Actual offers of Wheel spacers BMW 5 Saloon (E60) 530xd 3.0 235 hp Diesel M57 D30 (306D3)
-
- Registration Type: with TÜV® certificate
-
- Thickness [mm]: 15
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thread Size: M12x1,5
- Track widening per axle [mm]: 30
- Thickness [mm]: 15
- Track widening per axle [mm]: 30
- Colour: silver
- Registration Type: with TÜV® certificate
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: 3075725
- Our price: 108,98 €
- Manufacturer: H&R
- EAN number: 4048419057082
- Condition: New
3.) All DR-Systems require longer wheel-bolts. These have 7.) The original wheel screw which sticks out of the inner DR = The wheel spacer should be fitted between the wheel Please note additional information and vehicle-specific and the axial hub using longer bolts not supplied - please side of the wheel needs to have a permanent thread and technical notes! to be it´s order separately. When ordering the longer bolts please ordered separately. When ordering wheel-bolts please follow length has to be smaller than the thickness of the spacer. state which cone type you require (i.e. taper, round, loose these guidelines: If possible name the type of the wheel when ordering. round or flat) and the required extra length. All screws for the DR systems have to be orderded separately. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm, for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).
-
- Registration Type: with TÜV® certificate
-
- Thickness [mm]: 15
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thread Size: M12x1,5
- Track widening per axle [mm]: 30
- Thickness [mm]: 15
- Track widening per axle [mm]: 30
- Colour: black
- Registration Type: with TÜV® certificate
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: B3075725
- Our price: 108,98 €
- Manufacturer: H&R
- EAN number: 4048419131744
- Condition: New
3.) All DR-Systems require longer wheel-bolts. These have DR = The wheel spacer should be fitted between the wheel Please note additional information and vehicle-specific and the axial hub using longer bolts not supplied - please technical notes! to be order separately. When ordering the longer bolts please ordered separately. When ordering wheel-bolts please follow state which cone type you require (i.e. taper, round, loose these guidelines: If possible name the type of the wheel when ordering. round or flat) and the required extra length. All screws for the DR systems have to be orderded separately. New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm, for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).
-
- Registration Type: with certificate
- Thread Size: M12x1,5
- Observe service information
- Offset (ET) [mm]: 28
- Thickness [mm]: 15
- Track widening per axle [mm]: 30
- Colour: silver
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-2-15-001
- Our price: 109,60 €
- Manufacturer: EIBACH
- EAN number: 4050278018982
- Condition: New
One packaging unit contains two Pro-Spacers. Please note for system 1+2 mounting parts are not affected for the delivery. All mounting parts need to be ordered separately.
![051STB246 Spacers BMW 5 Series 530xd 235 hp 173 kW M57 D30 (306D3) 2007 E60](https://cdn.autodoc.de/brands/thumbs/100273.png?m=0)
- Thickness [mm]: 20
- Thread Size: M12X1.50
- Centering Diameter [mm]: 54.0
- Quantity: 2
- Quantity Unit: Piece
- Rim Hole Number: 4
- Hole Spacing [mm]: 100
- Type: M4
- Item number: 051STB246
- Our price: 115,01 €
- Manufacturer: SPARCO
- EAN number: 8033280085117
- Condition: New
-
- Thread Size: M12x1,5
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 20
- Track widening per axle [mm]: 40
- Colour: black
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-2-20-020-B
- Our price: 115,94 €
- Manufacturer: EIBACH
- EAN number: 4050278043618
- Condition: New
One packaging unit contains two Pro-Spacers. Please note for system 1+2 mounting parts are not affected for the delivery. All mounting parts need to be ordered separately.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 10
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 20
- Thickness [mm]: 10
- Track widening per axle [mm]: 20
- Colour: silver
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: 75725-10
- Our price: 130,25 €
- Manufacturer: H&R
- EAN number: 4048419132680
- Condition: New
31.) Wheel spacers with ABE are only useable for the 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 10
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 20
- Thickness [mm]: 10
- Track widening per axle [mm]: 20
- Colour: black
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- Rims: not for steel rims
- Follow installation instructions
- Item number: B75725-10
- Our price: 130,25 €
- Manufacturer: H&R
- EAN number: 4048419132673
- Condition: New
31.) Wheel spacers with ABE are only useable for the 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 25
- Track widening per axle [mm]: 50
- Thread Size: M12x1,5
- Colour: black
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-25-011-B
- Our price: 132,49 €
- Manufacturer: EIBACH
- EAN number: 4050278043717
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
price incl. 19% VAT
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 12
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 24
- Thickness [mm]: 12
- Track widening per axle [mm]: 24
- Colour: silver
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: 75725-12
- Our price: 135,32 €
- Manufacturer: H&R
- EAN number: 4048419132666
- Condition: New
31.) Wheel spacers with ABE are only useable for the 34.) The set contains: 4 spacers, 20 longer wheel screws. 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 12
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 24
- Thickness [mm]: 12
- Track widening per axle [mm]: 24
- Colour: black
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: B75725-12
- Our price: 135,32 €
- Manufacturer: H&R
- EAN number: 4048419132659
- Condition: New
31.) Wheel spacers with ABE are only useable for the 34.) The set contains: 4 spacers, 20 longer wheel screws. 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 15
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 30
- Thickness [mm]: 15
- Track widening per axle [mm]: 30
- Colour: silver
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: 75725-15
- Our price: 140,29 €
- Manufacturer: H&R
- EAN number: 4048419132642
- Condition: New
31.) Wheel spacers with ABE are only useable for the 34.) The set contains: 4 spacers, 20 longer wheel screws. 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 15
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 30
- Thickness [mm]: 15
- Track widening per axle [mm]: 30
- Colour: black
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: B75725-15
- Our price: 140,29 €
- Manufacturer: H&R
- EAN number: 4048419132635
- Condition: New
31.) Wheel spacers with ABE are only useable for the 34.) The set contains: 4 spacers, 20 longer wheel screws. 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 20
- Track widening per axle [mm]: 40
- Thread Size: M12x1,5
- Colour: silver
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-20-010
- Our price: 144,41 €
- Manufacturer: EIBACH
- EAN number: 4050278021807
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 20
- Track widening per axle [mm]: 40
- Thread Size: M12x1,5
- Colour: black
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-20-010-B
- Our price: 148,11 €
- Manufacturer: EIBACH
- EAN number: 4050278043649
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 25
- Track widening per axle [mm]: 50
- Thread Size: M12x1,5
- Colour: silver
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-25-011
- Our price: 148,23 €
- Manufacturer: EIBACH
- EAN number: 4050278022132
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
price incl. 19% VAT
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 20
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 40
- Thickness [mm]: 20
- Track widening per axle [mm]: 40
- Colour: silver
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: 75725-20
- Our price: 150,22 €
- Manufacturer: H&R
- EAN number: 4048419132628
- Condition: New
31.) Wheel spacers with ABE are only useable for the 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: with General Operating Permit (ABE)
-
- Rims: not for steel rims
-
- Thread Size: M12x1,5
-
- Number of Holes: 5
-
- Bolt Hole Circle Ø [mm]: 120
-
- Thickness [mm]: 20
-
- Thread Size: M12x1,5
- Rims: not for steel rims
- Track widening per axle [mm]: 40
- Thickness [mm]: 20
- Track widening per axle [mm]: 40
- Colour: black
- Registration Type: with General Operating Permit (ABE)
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72.5
- Bolt Hole Circle Ø [mm]: 120
- Follow installation instructions
- Item number: B75725-20
- Our price: 150,22 €
- Manufacturer: H&R
- EAN number: 4048419132611
- Condition: New
31.) Wheel spacers with ABE are only useable for the 35.) The set contains: 2 spacers, 10 longer wheel screws Please note additional information and vehicle-specific System DR-ABE: The spacer is fitted between the wheel and incl. 2 wheel lock screws. original wheels shown in the ABE which is enclosed in the technical notes! the hub with longer wheel-screws. delivery. For special wheel/tyre combinations an additional TÜV inspection is necessary. ABE are just valid in Germany. Included in the delivery of the ABE spacers is the entire fastening material.
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 30
- Track widening per axle [mm]: 60
- Thread Size: M12x1,5
- Colour: silver
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-30-002
- Our price: 154,65 €
- Manufacturer: EIBACH
- EAN number: 4050278022378
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
-
- Registration Type: without certificate
- Observe service information
- Thickness [mm]: 30
- Track widening per axle [mm]: 60
- Thread Size: M12x1,5
- Colour: black
- Material: Aluminium
- Number of Holes: 5
- Centering Diameter [mm]: 72,5
- Bolt Hole Circle Ø [mm]: 120
- reinforced version
- Surface: Anodized
- Product line: Pro-Spacer
- Follow installation instructions
- Item number: S90-7-30-002-B
- Our price: 154,65 €
- Manufacturer: EIBACH
- EAN number: 4050278043755
- Condition: New
One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).
![051STB402 Track widening BMW 5 Series 530xd 235 hp 173 kW M57 D30 (306D3) 2007 E60](https://cdn.autodoc.de/brands/thumbs/100273.png?m=0)
- Thickness [mm]: 25
- Thread Size: M12X1.25
- Centering Diameter [mm]: 65
- Quantity: 2
- Quantity Unit: Piece
- Rim Hole Number: 4
- Hole Spacing [mm]: 108
- Type: M5
- Item number: 051STB402
- Our price: 165,25 €
- Manufacturer: SPARCO
- EAN number: 8033280195090
- Condition: New
- 1
- 2
- 3
- 4