Actual offers of Suspension kit, coil springs / shock absorbers VW Tiguan I (5N) 2.0 TFSI 4motion 200 hp Petrol CAWB
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Item number: 1185S0052
- Our price: 129,36 €
- Manufacturer: RIDEX
- EAN number: 4066016833311
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Quantity Unit: Set
- Item number: 1185S0011
- Our price: 144,25 €
- Manufacturer: RIDEX
- EAN number: 4064138557016
- Condition: New
-
- Registration Type: with TÜV® certificate
-
- Pipe Ø [mm]: 55
-
- Axle Load front axle to [kg]: 1130
-
- Lowering [mm]: 35
- Axle Load front axle to [kg]: 1130
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowering [mm]: 35
- Follow installation instructions
- Item number: 40274-1
- Our price: 620,80 €
- Manufacturer: H&R
- EAN number: 4048419110732
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowering ca. [mm]: 30
- Axle Load rear axle to [kg]: 1170
-
- Fitting Position: Front Axle
- Lowering ca. [mm]: 30
- Axle Load front axle to [kg]: 1200
-
- Observe service information
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Suspension: for vehicles without electronic suspension control
- Registration Type: with certificate
- Item number: E90-15-020-03-22
- Our price: 875,03 €
- Manufacturer: EIBACH
- EAN number: 4050278044400
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
Sehr gutes fahrwerk
-
- Fitting Position: Rear Axle
- Raised suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1130
-
- Fitting Position: Front Axle
- Raised suspension ca. [mm]: 30
- Axle Load front axle to [kg]: 1190
-
- Observe service information
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
- Shock Absorber Type: Gas Pressure
- Registration Type: with certificate
- Item number: E93-85-020-02-22
- Our price: 930,72 €
- Manufacturer: EIBACH
- EAN number: 4050278101073
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowering ca. [mm]: 35-65
-
- Fitting Position: Front Axle
- Lowering ca. [mm]: 35-65
-
- Observe service information
- EG type approval number from: e1*? / ?*0450*..
- Axle Load rear axle to [kg]: 1170
- Axle Load front axle to [kg]: 1200
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Vehicle Equipment: for vehicles without leveling control
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-15-020-01-22
- Our price: 1012,59 €
- Manufacturer: EIBACH
- EAN number: 4050278084055
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Version: excl. Track&Field
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle to [mm]: 75
-
- Lowered front axle from [mm]: 50
- Lowered front axle to [mm]: 80
- Lowered rear axle from [mm]: 50
- Lowered rear axle to [mm]: 80
- Version: excl. Track&Field
- Fitting Position: Front Axle, Rear Axle
- Suspension Strut Outer Diameter [mm]: 55
- Lowering ca. [mm]: 50-70
- Shock Absorber System: Monotube
- Vehicle type: 5N, 1T
- Quantity Unit: Set
- for components see parts list
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 29029-1
- Our price: 1050,29 €
- Manufacturer: H&R
- EAN number: 4048419005212
- Condition: New
"The minimum clearance between tires and suspension/body low Version Lowering beyond the dimensions given in the type approval Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Version: excl. Track&Field
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle to [mm]: 70
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 40, 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 40
- Lowered rear axle to [mm]: 70
- Version: Nicht Track&Field!
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 29271-2
- Our price: 1051,56 €
- Manufacturer: H&R
- EAN number: 4048419026224
- Condition: New
"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered front axle from [mm]: 65
- Lowered front axle to [mm]: 75
- Lowered rear axle from [mm]: 55
- Lowered rear axle to [mm]: 75
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle from [kg]: 986
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 28851-18
- Our price: 1057,89 €
- Manufacturer: H&R
- EAN number: 4048419274052
- Condition: New
"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered front axle from [mm]: 65
- Lowered front axle to [mm]: 75
- Lowered rear axle from [mm]: 55
- Lowered rear axle to [mm]: 75
- Suspension: for vehicles without electronic suspension control
- Axle Load front axle to [kg]: 985
- Suspension Strut Outer Diameter [mm]: 55
- Axle: Multi-link Axle
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 28851-17
- Our price: 1072,52 €
- Manufacturer: H&R
- EAN number: 4048419274045
- Condition: New
"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Item number: SKSAK-5240051
- Our price: 120,52 €
- Manufacturer: STARK
- EAN number: 4066016833304
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Quantity Unit: Set
- Item number: SKSAK-5240010
- Our price: 134,69 €
- Manufacturer: STARK
- EAN number: 4064138557009
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered front axle [mm]: 40
- Lowered rear axle [mm]: 40
- Axle Load front axle to [kg]: 1190
- Axle Load rear axle to [kg]: 1130
- Shock Absorber Type: Oil Pressure
- Registration Type: with TÜV® certificate
- Number of springs: 4
- Item number: 23280180
- Our price: 432,69 €
- Manufacturer: STsuspensions
- EAN number: 4250580404866
- Condition: New
-
- Fitting Position: Rear Axle
- Lowering [mm]: 40
- Axle Load rear axle to [kg]: 1130
-
- Fitting Position: Front Axle
- Lowering [mm]: 40
- Axle Load front axle to [kg]: 1190
- Shock Absorber Type: Oil Pressure
- Registration Type: with TÜV® certificate
- Item number: 123280180
- Our price: 579,40 €
- Manufacturer: METZGER
- EAN number: 4250580404866
- Condition: New
Set (VA+HA)
-
- Registration Type: with TÜV® certificate
-
- Pipe Ø [mm]: 55
-
- Axle Load front axle from [kg]: 1131
-
- Lowering [mm]: 35
- Axle Load front axle from [kg]: 1131
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowering [mm]: 35
- Follow installation instructions
- Item number: 40274-2
- Our price: 620,80 €
- Manufacturer: H&R
- EAN number: 4048419110749
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
price incl. 19% VAT
- Fitting Position: Front and Rear
- Shock Absorber System: Twin-Tube
- adjustable: adjustable
- Item number: 1140-2741
- Our price: 915,46 €
- Manufacturer: KONI
- EAN number: 8712167134550
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Fitting Position: Front and Rear
- Shock Absorber System: Twin-Tube
- adjustable: adjustable
- Item number: 1140-2742
- Our price: 915,46 €
- Manufacturer: KONI
- EAN number: 8712167134567
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
-
- Lowered rear axle from [mm]: 35
- Lowered rear axle to [mm]: 65
- Axle Load rear axle to [kg]: 1130
-
- Lowered front axle from [mm]: 35
- Lowered front axle to [mm]: 65
- Axle Load front axle to [kg]: 1180
- Housing material: Steel
- Surface: Zinc-coated
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with TÜV® certificate
- Item number: 113280077
- Our price: 973,99 €
- Manufacturer: METZGER
- EAN number: 4250173396264
- Condition: New
Für Fahrzeuge mit einem Federbeindurchmesser an der Set VA Gewindefederbeine, HA Federn mit Höhenverstellung + Shock absorber without hardness adjustment ST Gewindefahrwerke ST X Die ST X Gewindefahrwerke erlauben Dämpfer durch die stufenlose Gewindeverstellung eine moderate bis Vorderachse von 55 mm eXtreme Tieferlegung. Basierend auf dem Knowhow von KW, dem Marktführer für individuelle Fahrwerklösungen, überzeugen die ST X Gewindefahrwerke durch ihre Qualität und Fahrdynamik.- Individuelle Tieferlegung innerhalb des TÜV-geprüften Verstellbereichs- VA und HA (sofern technisch möglich) mit Gewindeverstellung- Verzinkte Gewindefederbeine mit zusätzlicher Versiegelung für einen optimierten Korrosionsschutz Komplette Lösung mit Verstellfederteller, Rennsportfedersystem und Anschlagelementen mit Staubschutzsystem Leistungsfähiger 2-Rohr Dämpfer mit hochwertigen Komponenten für eine lange Lebensdauer
-
- Fitting Position: Front Axle
- Axle Load [kg] to: 1190
- Raised suspension ca. [mm]: 30
-
- Fitting Position: Rear Axle
- Axle Load [kg] to: 1130
- Raised suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Shock Absorber Type: Gas Pressure
- Item number: 46-279033
- Our price: 1319,49 €
- Manufacturer: BILSTEIN
- EAN number: 4025258898021
- Condition: New
- Item number: 2100-4109
- Our price: 862,50 €
- Manufacturer: KONI
- EAN number: 8712167120201
- Condition: New