Actual offers of Suspension kit, coil springs / shock absorbers VW Golf Plus / Crossgolf (5M1, 521) 1.2 TSI 86 hp Petrol CBZA
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Item number: 1185S0012
- Our price: 102,51 €
- Manufacturer: RIDEX
- EAN number: 4064138557078
- Condition: New
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Item number: 1185S0052
- Our price: 131,26 €
- Manufacturer: RIDEX
- EAN number: 4066016833311
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Quantity Unit: Set
- Item number: 1185S0011
- Our price: 147,26 €
- Manufacturer: RIDEX
- EAN number: 4064138557016
- Condition: New
- Fitting Position: Front and Rear
- for RPO number: DQ006
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 50
- Item number: 1120-0085
- Our price: 529,88 €
- Manufacturer: KONI
- EAN number: 8712167130590
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front and Rear
- for RPO number: DQ007
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 50
- Item number: 1120-0086
- Our price: 529,88 €
- Manufacturer: KONI
- EAN number: 8712167130606
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front and Rear
- for RPO number: DQ008
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 50
- Item number: 1120-0087
- Our price: 529,88 €
- Manufacturer: KONI
- EAN number: 8712167130613
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Front and Rear
- for RPO number: DQ015
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 55
- Item number: 1120-2611
- Our price: 538,97 €
- Manufacturer: KONI
- EAN number: 8712167131245
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Front and Rear
- for RPO number: DQ017
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 50
- Item number: 1120-2613
- Our price: 546,04 €
- Manufacturer: KONI
- EAN number: 8712167131269
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front and Rear
- for RPO number: DQ002
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 55
- Item number: 1120-0081
- Our price: 556,48 €
- Manufacturer: KONI
- EAN number: 8712167130552
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front and Rear
- for RPO number: DQ003
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 55
- Item number: 1120-0082
- Our price: 556,48 €
- Manufacturer: KONI
- EAN number: 8712167130569
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Front and Rear
- for RPO number: DQ016
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 55
- Item number: 1120-2612
- Our price: 569,26 €
- Manufacturer: KONI
- EAN number: 8712167131252
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front and Rear
- for RPO number: DQ001
- Shock Absorber System: cannot be set / adjusted
- Housing Diameter in Clamping Area [mm]: 55
- Item number: 1120-0080
- Our price: 595,32 €
- Manufacturer: KONI
- EAN number: 8712167130545
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Pipe Ø [mm]: 50
-
- Axle Load front axle to [kg]: 1020
-
- Lowering [mm]: 35
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-3
- Our price: 614,00 €
- Manufacturer: H&R
- EAN number: 4048419070432
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowering [mm]: 35
- Follow installation instructions
- Item number: 40261-4
- Our price: 614,00 €
- Manufacturer: H&R
- EAN number: 4048419070449
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Axle Load front axle from [kg]: 1021
-
- Registration Type: with TÜV® certificate
-
- Pipe Ø [mm]: 55
-
- Lowering [mm]: 35
- Fitting Position: Front Axle, Rear Axle
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 55
- Lowering ca. [mm]: 35
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Quantity Unit: Kit
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-2
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419070425
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Ø [mm]: 55
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-3
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419059390
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Ø [mm]: 50
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle to [kg]: 1065
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-6
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419059420
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Ø [mm]: 50
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-7
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419059437
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Ø [mm]: 55
-
- Registration Type: with TÜV® certificate
-
- Lowered to [mm]: 50
-
- Lowered suspension from [mm]: 45
- Lowered to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-1
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419070395
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Ø [mm]: 50
-
- Registration Type: with TÜV® certificate
-
- Lowered to [mm]: 50
-
- Lowered suspension from [mm]: 45
- Lowered to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-2
- Our price: 623,27 €
- Manufacturer: H&R
- EAN number: 4048419070401
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2
- 3
- 4
- 5