MERCEDES-BENZ M-Class (W163) ML 270 CDI (163.113) (120 kW / 163 hp) 1999
Vehicle identification number: 0710448
Vehicle identification number: 0710448
Vehicle details
Change
Info: ML W163 ML270CDI (163.113)
Type:
ML 270 CDI (163.113)
Power [hp]:
163
Manuf. year (from - to):
12.1999 - 06.2005
Engine data
Engine volume
2 688 cm3
Engine power
163 PS
Full load rpm
to 4 200 rpm
Maximum torque
370 H*m
Peak torque rpm
to 1 600 rpm
Engine type
Diesel
Engine configuration
Inline
Intake type
Common Rail
Presence of the intercooler
Included
Number of cylinders
5
Number of valves per cylinder
4
Bore diameter
88 mm
Piston stroke
88.4 mm
OM 612.963
Vehicle dimensions
Seats
5
Length * width * height
4 638 x 1 840 x 1 820 mm
Wheelbase
2 820 mm
Front/rear track
1 555/1 555 mm
Curb weight
2 075 kg
Luggage volume
from 633 to 2 020 L
Maximum weight
2 870 kg
Cargo capacity
795 kg
Towing capacity
5 575 kg
Suspension and brakes data
Front suspension
Indepedent, Double wishbone, Spring, Stabilizer
Rear suspension
Indepedent, Multi-link
Front brakes
Ventilated disc
Rear brakes
Disc
Transmission and steering information
Transmission
Manual, 6 gears
Wheel drive
4WD
Turning cycle
11.9 m.
Operating characteristics
Fuel tank volume
83 L
Recommended fuel
DF
Ecologic standard
EURO III
Maximum speed
185 km/h
Acceleration from standstill to 100 km/h
12.2 s
Combined fuel consumption
9.4 L per 100 km
Urban fuel consumption
12.4 L per 100 km
Highway fuel consumption
7.7 L per 100 km
cruising range
from 670 to 1 080 km
Actual offers of Suspension arm MERCEDES-BENZ ML-Class (W163) ML 270 CDI 2.7 163 hp Diesel OM 612.963
Filter
336 items
RIDEX 273C0867 Suspension arm Rear Axle, outer, Right, Upper, Front, Control Arm, Cone Size: 15,2 mm
Article number: 273C0867
Submit a review
- Fitting Position: Rear Axle, outer, Right, Upper, Front
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 420, 378,3
- Height [mm]: 90
- Cone Size [mm]: 15,2
- Thread Size: M14x1.5
- Width [mm]: 83
- Thread size 3: Bush 12.2
- Item number: 273C0867
- Manufacturer: RIDEX
- EAN number: 4059191725267
- Condition: New
Show OEM numbers of the product
Details
RIDEX 273C0240 Suspension arm Front Axle, Right, Upper, Control Arm, Aluminium, Cone Size: 13,3 mm
Article number: 273C0240
Reviews - 6
- Fitting Position: Front Axle, Right, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 228
- Cone Size [mm]: 13,3
- Thread Size 1: M12x1.5
- only in connection with: Ball joint
- Item number: 273C0240
- Manufacturer: RIDEX
- EAN number: 4059191408399
- Condition: New
Show OEM numbers of the product
Details
RIDEX 273C0239 Suspension arm Front Axle, Left, Upper, Control Arm, Aluminium, Cone Size: 13,3 mm
Article number: 273C0239
Reviews - 2
- Fitting Position: Front Axle, Left, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 228
- Cone Size [mm]: 13,3
- Thread Size 1: M12x1.5
- only in connection with: Ball joint
- Item number: 273C0239
- Manufacturer: RIDEX
- EAN number: 4059191384631
- Condition: New
Show OEM numbers of the product
Details
RIDEX 273C0791 Suspension arm Rear Axle, Left, Upper, Control Arm, Aluminium, Cone Size: 13,5 mm
Article number: 273C0791
Submit a review
- Fitting Position: Rear Axle, Left, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13,5
- Cone Pitch: 1 / 6
- Thread Size 1: M12x1,5
- Item number: 273C0791
- Manufacturer: RIDEX
- EAN number: 4059191709205
- Condition: New
Show OEM numbers of the product
Details
RIDEX 273C0792 Suspension arm Rear Axle, Right, Upper, Control Arm, Aluminium, Cone Size: 13,5 mm
Article number: 273C0792
Reviews - 1
- Fitting Position: Rear Axle, Right, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 13,5
- Cone Pitch: 1 / 6
- Thread Size 1: M12x1,5
- Item number: 273C0792
- Manufacturer: RIDEX
- EAN number: 4059191709212
- Condition: New
Show OEM numbers of the product
Details
RIDEX 273C1670 Suspension arm Left, Lower, Front Axle, Control Arm
Article number: 273C1670
Submit a review
- Fitting Position: Left, Lower, Front Axle
- Vehicle Identification Number (VIN) from: A145273
- Control / Trailing Arm Type: Control Arm
- Item number: 273C1670
- Manufacturer: RIDEX
- EAN number: 4059191882014
- Condition: New
Show OEM numbers of the product
Details
STARK SKCA-0050865 Suspension arm Rear Axle, outer, Right, Upper, Front, Control Arm, Cone Size: 15,2 mm
Article number: SKCA-0050865
Submit a review
- Fitting Position: Rear Axle, outer, Right, Upper, Front
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 420, 378,3
- Height [mm]: 90
- Cone Size [mm]: 15,2
- Thread Size: M14x1.5
- Width [mm]: 83
- Thread size 3: Bush 12.2
- Item number: SKCA-0050865
- Manufacturer: STARK
- EAN number: 4059191494217
- Condition: New
Show OEM numbers of the product
Details
TRUCKTEC AUTOMOTIVE 02.32.152 Suspension arm Rear Axle Right, Control Arm
Article number: 02.32.152
Submit a review
- Fitting Position: Rear Axle Right
- Control / Trailing Arm Type: Control Arm
- for OE number: 163 350 0653
- Item number: 02.32.152
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081052010
- Condition: New
Show OEM numbers of the product
Details
TOPRAN 401 810 Suspension arm with bearing(s), with nut, Upper, Rear Axle Right, Control Arm, Cast Steel, Black-painted, Cathodic Painting
Article number: 401 810
Submit a review
- Fitting Position: Upper, Rear Axle Right
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: 401 807
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with nut
- Surface: Black-painted, Cathodic Painting
- Item number: 401 810
- Manufacturer: TOPRAN
- EAN number: 3500650000018
- Condition: New
Show OEM numbers of the product
Additional information
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Details
STARK SKCA-0050237 Suspension arm Front Axle, Right, Upper, Control Arm, Aluminium, Cone Size: 13,3 mm
Article number: SKCA-0050237
Reviews - 1
- Fitting Position: Front Axle, Right, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 228
- Cone Size [mm]: 13,3
- Thread Size 1: M12x1.5
- only in connection with: Ball joint
- Item number: SKCA-0050237
- Manufacturer: STARK
- EAN number: 4059191286850
- Condition: New
Show OEM numbers of the product
Details
VAICO V30-7286 Suspension arm Original VAICO Quality, Left Rear, Rear Axle Lower, Left, Control Arm
Article number: V30-7286
Reviews - 1
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left Rear, Rear Axle Lower, Left
- Control / Trailing Arm Type: Control Arm
- paired article number: V30-7287
- Weight [kg]: 1,83
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10,5
- Packaging height [cm]: 45
- Packaging Depth [cm]: 8
- Item number: V30-7286
- Manufacturer: VAICO
- EAN number: 4046001315268
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
DELPHI TC3018 Suspension arm with ball joint, Left, Lower, Trailing Arm, Steel
Article number: TC3018
Submit a review
-
- Fitting Position: Rear Axle, Left
- paired article number: TC3019
- Fitting Position: Left, Lower
- Material: Steel
- Control / Trailing Arm Type: Trailing Arm
- Length [mm]: 420
- Height [mm]: 90
- paired article number: TC3019
- Thread Size 1: M14x1.5
- Thread Size 2: Bush 12.2
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 83
- Item number: TC3018
- Manufacturer: DELPHI
- EAN number: 5012759532379
- Condition: New
Show OEM numbers of the product
Details
TOPRAN 401 807 Suspension arm with nut, with bearing(s), Upper, Rear Axle Left, Control Arm, Cast Steel, Black-painted, Cathodic Painting
Article number: 401 807
Reviews - 1
- Fitting Position: Upper, Rear Axle Left
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: 401 810
- Supplementary Article / Supplementary Info Info 2: with nut, with bearing(s)
- Surface: Black-painted, Cathodic Painting
- Item number: 401 807
- Manufacturer: TOPRAN
- EAN number: 3500550000019
- Condition: New
Show OEM numbers of the product
Additional information
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Details
MAPCO 51855 Suspension arm Front Axle Right, Upper, Control Arm, Aluminium
Article number: 51855
Submit a review
- Fitting Position: Front Axle Right, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- paired article number: 51854
- Required quantity: 1
- Item number: 51855
- Manufacturer: MAPCO
- EAN number: 4043605109477
- Condition: New
Show OEM numbers of the product
Details
MERTZ M-S2134 Suspension arm with bearing(s), Front Axle Right, Upper, Control Arm, Aluminium
Article number: M-S2134
Submit a review
- Fitting Position: Front Axle Right, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Inner Diameter [mm]: 12
- Item number: M-S2134
- Manufacturer: MERTZ
- EAN number: 2505820576523
- Condition: New
Show OEM numbers of the product
Details
TRUCKTEC AUTOMOTIVE 02.32.151 Suspension arm Rear Axle Left, Control Arm
Article number: 02.32.151
Submit a review
- Fitting Position: Rear Axle Left
- Control / Trailing Arm Type: Control Arm
- for OE number: 163 350 0553
- Item number: 02.32.151
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081052003
- Condition: New
Show OEM numbers of the product
Details
METZGER 58143804 Suspension arm Rear Axle Right, Upper, Control Arm, Cone Size: 15 mm
Article number: 58143804
Submit a review
- Fitting Position: Rear Axle Right, Upper
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- paired article number: 58143703
- Thread Size: M14 x 1,5
- Item number: 58143804
- Manufacturer: METZGER
- EAN number: 4062101153241
- Condition: New
Show OEM numbers of the product
Details
A.B.S. 211731 Suspension arm with ball joint, with rubber mount, in front of axle, Rear Axle Right, Right, outer, Upper, Control Arm, Aluminium, Cone Size: 15 mm
Article number: 211731
Submit a review
- Fitting Position: in front of axle, Rear Axle Right, Right, outer, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 378
- Cone Size [mm]: 15
- paired article number: 211730
- Thread Size: MM14X1,5 RHT
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 1,328
- reinforced version
- Item number: 211731
- Manufacturer: A.B.S.
- EAN number: 2220692199210
- Condition: New
Show OEM numbers of the product
Additional information
Important: Observe Fitting Instructions
Details
SIDEM 49254 Rod / Strut, wheel suspension Rear Axle Left, Trailing Arm, Cone Size: 15 mm, Push Rod
Article number: 49254
Submit a review
- Fitting Position: Rear Axle Left
- Control / Trailing Arm Type: Trailing Arm
- Length [mm]: 385
- Cone Size [mm]: 15
- paired article number: 49255
- Thread Size 1: MM14X1,5R
- Rod / Strut: Push Rod
- Observe service information
- Item number: 49254
- Manufacturer: SIDEM
- EAN number: 5413978242559
- Condition: New
Show OEM numbers of the product
Details
STARK SKCA-0050236 Suspension arm Front Axle, Left, Upper, Control Arm, Aluminium, Cone Size: 13,3 mm
Article number: SKCA-0050236
Submit a review
- Fitting Position: Front Axle, Left, Upper
- Material: Aluminium
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 228
- Cone Size [mm]: 13,3
- Thread Size 1: M12x1.5
- only in connection with: Ball joint
- Item number: SKCA-0050236
- Manufacturer: STARK
- EAN number: 4059191286843
- Condition: New
Show OEM numbers of the product
Details
Load more
- 1
- 2
- 3
- 4
- 5
Find the best offers on