Actual offers of Spark plug MERCEDES-BENZ ML-Class (W166) ML 350 306 hp Petrol M 276.955
- Electrode Gap [mm]: 0,7
- Spanner Size: 14
- Thread Length [mm]: 26,5
- Spark Position [mm]: 5
- Thread Size: M 12 x 1,25
- Required quantity: 6
- Tightening Torque [Nm]: 23
- Number of pins: 1
- Item number: 0 242 140 521
- Manufacturer: BOSCH
- EAN number: 4047024496736
- Condition: New
- Electrode Gap [mm]: 0,75
- Spanner Size: 14 mm Bi-Hex
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Quality / Grade: Pt GE
- Thread Length [mm]: 24,5
- Spark Position [mm]: 3,7
- Thread Size: M12x1.25
- Connector type: SAE
- Required quantity: 6
- Packing Type: Box
- Technical Information Number: RERX4ZWYPB3
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 25
- Shaft Length [mm]: 3
- Packaging length [cm]: 9,2
- Packaging width [cm]: 2,7
- Packaging height [cm]: 2,5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1,2
- Item number: OE268
- Manufacturer: CHAMPION
- EAN number: 4060426396350
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Height [mm]: 54,5
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 29,4
- Brake Disc Hub Height [mm]: 22,5
- Packaging width [cm]: 34
- Packaging height [cm]: 11
- Packaging Depth [cm]: 34
- Drilled: no
- Item number: V30-80013
- Manufacturer: VAICO
- EAN number: 4046001446658
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: Vented
- Height [mm]: 54,5
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 29,4
- Brake Disc Hub Height [mm]: 22,5
- Packaging width [cm]: 36
- Packaging height [cm]: 11
- Packaging Depth [cm]: 36
- Drilled: no
- Item number: V30-80014
- Manufacturer: VAICO
- EAN number: 4046001447549
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Article number of recommended accessories: 98024701
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package
- Special Purpose Vehicle: for armoured vehicles, not for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: TRW
- Thickness [mm]: 19
- Height 1 [mm]: 50
- Height 2 [mm]: 60
- Width [mm]: 116
- WVA Number: 25215, 25216
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Item number: P 50 099
- Our price: 41,86 €
- Manufacturer: BREMBO
- EAN number: 8020584104712
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Teves
- Thickness [mm]: 19
- Height [mm]: 72
- Width 2 [mm]: 193
- Width 1 [mm]: 192
- WVA Number: 25531, 25532
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Item number: P 50 102
- Our price: 73,74 €
- Manufacturer: BREMBO
- EAN number: 8020584104743
- Condition: New
- Quantity Unit: Axle Set
- Supplementary Info: Q+, original equipment manufacturer quality
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact, prepared for wear indicator
- Brake System: ATE
- Thickness [mm]: 19,3
- Height [mm]: 72
- Width 2 [mm]: 193,1
- Width 1 [mm]: 192,5
- Weight [kg]: 2,843
- Packaging width [cm]: 13,75
- Packaging height [cm]: 21,25
- Packaging Depth [cm]: 10,5
- Item number: V30-2137
- Our price: 59,02 €
- Manufacturer: VAICO
- EAN number: 4046001623325
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: TRW
- Thickness [mm]: 18,7
- Height 1 [mm]: 49,8
- Height 2 [mm]: 59,6
- Width [mm]: 116,4
- WVA Number: 25215
- Weight [kg]: 1,35
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2521502
- Our price: 69,34 €
- Manufacturer: TEXTAR
- EAN number: 4019722443572
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Brake System: Teves
- Thickness [mm]: 21,3
- Height 1 [mm]: 64
- Height 2 [mm]: 64
- Width 2 [mm]: 193
- Width 1 [mm]: 193,3
- WVA Number: 25192
- Weight [kg]: 2,7
- Packaging length [cm]: 20,9
- Packaging width [cm]: 13,4
- Packaging height [cm]: 8,8
- Item number: MDB3239
- Our price: 67,36 €
- Manufacturer: MINTEX
- EAN number: 5028740798242
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Length [mm]: 193,2
- Width [mm]: 64,1
- Thickness 1 [mm]: 21,1
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,751
- Special Purpose Vehicle: not for armoured vehicles
- Item number: 16900
- Our price: 45,36 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816169000
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Fitting Position: Front Axle
- Diameter [mm]: 330,0
- Brake Disc Type: internally vented
- Height [mm]: 54,5
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 5 / 8
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 29,4
- Weight [kg]: 11,1
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without wheel studs
- Drilled: no
- Item number: 82B0952
- Manufacturer: RIDEX
- EAN number: 4059191139903
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 32,2
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 54,7
- Minimum thickness [mm]: 29,4
- Weight [kg]: 11,728
- Number of mounting bores: 3
- Drilled: no
- Item number: 24743
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816247432
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 54,7
- Minimum thickness [mm]: 29,4
- Weight [kg]: 13,101
- Number of mounting bores: 3
- for OE number: 164 421 14 12
- Drilled: no
- Item number: 24745
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816247456
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package
- Special Purpose Vehicle: not for armoured vehicles
- Article number of recommended accessories: 98024701
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: TRW
- Thickness [mm]: 19
- Height 1 [mm]: 50
- Height 2 [mm]: 60
- Width [mm]: 116
- WVA Number: 25215, 25216
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Item number: P 50 100
- Our price: 42,54 €
- Manufacturer: BREMBO
- EAN number: 8020584104729
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Teves
- Thickness [mm]: 21
- Height [mm]: 64
- Width [mm]: 193
- WVA Number: 25500, 25192
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Item number: P 50 109
- Our price: 59,18 €
- Manufacturer: BREMBO
- EAN number: 8020584109519
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: TRW
- Thickness [mm]: 18,7
- Height 1 [mm]: 49,7
- Height 2 [mm]: 59,5
- Width [mm]: 116,2
- WVA Number: 25215
- Weight [kg]: 1,3
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Observe mounting information
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: MDB3245
- Our price: 51,75 €
- Manufacturer: MINTEX
- EAN number: 5028740784979
- Condition: New
-
- Special Purpose Vehicle: not for armoured vehicles
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: TRW
- Thickness [mm]: 18,7
- Height 1 [mm]: 49,8
- Height 2 [mm]: 59,6
- Width [mm]: 116,4
- WVA Number: 25215
- Weight [kg]: 1,251
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2521501
- Our price: 81,74 €
- Manufacturer: TEXTAR
- EAN number: 4019722443565
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Brake System: Teves
- Thickness [mm]: 21,3
- Height 1 [mm]: 64
- Height 2 [mm]: 64
- Width 2 [mm]: 193
- Width 1 [mm]: 193,3
- WVA Number: 25192
- Weight [kg]: 2,7
- Observe mounting information
- Packaging length [cm]: 20,9
- Packaging width [cm]: 13,4
- Packaging height [cm]: 8,8
- Item number: 2519202
- Our price: 75,79 €
- Manufacturer: TEXTAR
- EAN number: 4019722439704
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for armoured vehicles
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Brake System: Teves
- Thickness [mm]: 19,2
- Height [mm]: 72
- Width 2 [mm]: 193,3
- Width 1 [mm]: 192,6
- WVA Number: 25531
- Weight [kg]: 2,3
- Observe mounting information
- Packaging length [cm]: 20,9
- Packaging width [cm]: 13,4
- Packaging height [cm]: 8,8
- Item number: 2553101
- Our price: 105,23 €
- Manufacturer: TEXTAR
- EAN number: 4019722445460
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19,0
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 64
- Height 2 [mm]: 63,9
- Width 2 [mm]: 193,1
- Width 1 [mm]: 194,3
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Fulfils ECE norm: ECE-R90
- Item number: SKBP-0011169
- Our price: 32,45 €
- Manufacturer: STARK
- EAN number: 4059191284221
- Condition: New