Vehicle identification number: 0035108
Actual offers of Repair kit, wheel suspension OPEL Vectra C Saloon (Z02) 1.9 CDTI 100 hp Diesel Z 19 DTL
Sehr gute Qualität und leichter Einbau!
Sehr gutes Material und günstig
- Fitting Position: Rear Axle, Upper, both sides
- for article number: 34080 01, 33907 01
- Item number: 39730 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437491236
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
Wegen der Qualität
- Fitting Position: Front Axle, both sides
- for article number: 36926 01, 36927 01
- Item number: 39893 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437495647
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Required quantity: 1
- Control / Trailing Arm Type: Control Arm, Trailing Arm
- Number of Parts [parts]: 18
- Item number: 00509464
- Our price: 129,28 €
- Manufacturer: TEDGUM
- EAN number: 5902275101374
- Condition: New
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: for police vehicles
- Diameter [mm]: 302,3
- Brake Disc Type: internally vented
- Height [mm]: 45,2
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: O1002V
- Manufacturer: LPR
- EAN number: 8032532099063
- Condition: New
Gute Erfahrungen mit ATE
ich nur gute Erfahrungen mit ATE bis heute gemacht habe.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 32,67 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
ich gute Erfahrungen mit ATE gemacht habe.
ATE sind top Bremsen
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 35,48 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
gute erfahrung mit dieser Marke
-
- Brake Caliper Type: for brake calipers with steel pistons
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Item number: 13.0460-7212.2
- Our price: 43,61 €
- Manufacturer: ATE
- EAN number: 4006633274289
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
Weniger Bremsstaub anfällt.
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 4463
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7194.2
- Our price: 41,83 €
- Manufacturer: ATE
- EAN number: 4006633374385
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
habe gute Erfahrungen
Passgenau und gute Qualität
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0173.1
- Manufacturer: ATE
- EAN number: 4006633105842
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
weil ATE in Erstausrüster Qualität liefert
Ich gute Erfahrungen gemacht habe
-
- Special Purpose Vehicle: for police vehicles
- Fitting Position: Front Axle
- Diameter [mm]: 302,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 45,0
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 25,0
- Inner Diameter [mm]: 139,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0118 / 0657
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0128-0137.1
- Manufacturer: ATE
- EAN number: 4006633106061
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Product line: PowerDisc
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0320-0173.1
- Manufacturer: ATE
- EAN number: 4006633147538
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for police vehicles
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 285,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 42,1
- Brake Disc Thickness [mm]: 24,9
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0858 / 1210
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0141.1
- Manufacturer: ATE
- EAN number: 4006633120371
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 278
- Brake Disc Type: solid
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: O1014P
- Manufacturer: LPR
- EAN number: 8032928001694
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Brake System: Ate-Teves
- Height [mm]: 69,3
- Width [mm]: 155,1
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,1
- Production Number: 6001720
- Item number: 6001720
- Our price: 19,73 €
- Manufacturer: KRAFT
- EAN number: 5900427191037
- Condition: New
-
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 43,28 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1242 / 4466
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0470-7172.2
- Our price: 57,85 €
- Manufacturer: ATE
- EAN number: 4006633374835
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
Die Qualität ist ausgezeichnet. Sie bremsen sehr gut. Erfordert wenig Aufwärmen.
Bei allen Fahrzeugen benutze ich diese wegen dem verringerten bremsstaub und der sehr guten bremsleistung
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7195.2
- Our price: 52,22 €
- Manufacturer: ATE
- EAN number: 4006633347020
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0532
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0157.1
- Manufacturer: ATE
- EAN number: 4006633105828
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for police vehicles
- Fitting Position: Front Axle
- Diameter [mm]: 285,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 42,1
- Brake Disc Thickness [mm]: 24,9
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0115 / 0436
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0141.1
- Manufacturer: ATE
- EAN number: 4006633105927
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Product line: PowerDisc
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0312-0157.1
- Manufacturer: ATE
- EAN number: 4006633147491
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs