Vehicle identification number: 0588BPT
Actual offers of Repair kit, wheel suspension AUDI A6 C8 Saloon (4A2) 45 TDI Mild Hybrid quattro 211 hp Diesel/Electro DDVF
- Fitting Position: Front Axle, both sides
- for article number: 38885 01
- Item number: 43529 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437549210
- Condition: New
- Fitting Position: Front Axle, both sides
- for article number: 38885 01
- Item number: 43530 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437549227
- Condition: New
- Fitting Position: Front axle both sides
- for article number: 370071, 370072, 370073
- Item number: 37006
- Manufacturer: SIDEM
- EAN number: 5413978282814
- Condition: New
- Fitting Position: Front axle both sides
- for article number: 370071, 370072, 370073
- Item number: 60033
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978905843
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 2EF, 2EW
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,2
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,1
- Drilled: no
- Item number: 0 986 479 750
- Manufacturer: BOSCH
- EAN number: 4047024887084
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KD
- Diameter [mm]: 299,8
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 36,2
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 68,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 382
- Manufacturer: BOSCH
- EAN number: 4047024680968
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 2EF, 1KJ, 2EW
- Product line: SPORT COAT Z
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Surface: Coated
- Height [mm]: 36
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 100.3358.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238752912
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,955
- Number of mounting bores: 1
- for OE number: 8K0 615 601 C
- Observe service information
- old version
- Drilled: no
- Item number: 36454
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816364542
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Height [mm]: 36,4
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Brake Disc Hub Height [mm]: 24,3
- Packaging width [cm]: 32
- Packaging height [cm]: 8
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V10-40083
- Manufacturer: VAICO
- EAN number: 4046001377662
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Construction Year from: 09 / 2018
- Fitting Position: Rear Axle
- for PR number: 1KJ
-
- Construction Year from: 09 / 2018
- Fitting Position: Rear Axle
- for PR number: 1KF
-
- Construction Year to: 08 / 2018
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ
- Product line: COATED
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,4
- Brake Disc Thickness [mm]: 22
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Manufacturer Restriction: TRW
- Drilled: no
- Item number: 8120 291044C
- Manufacturer: TRISCAN
- EAN number: 5710476051059
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Height [mm]: 36
- Brake Disc Thickness [mm]: 21,9
- for PR number: 1KF
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Brake Disc Hub Height [mm]: 14,1
- Packaging width [cm]: 34
- Packaging height [cm]: 8
- Packaging Depth [cm]: 34
- Drilled: no
- Item number: V10-80112
- Manufacturer: VAICO
- EAN number: 4046001621987
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 2EF, 2EW
- Braking System: for vehicles without ceramic brakes
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Height [mm]: 35,8
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Ø [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 143,2
- Weight [kg]: 7,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 35,8
- Packaging width [cm]: 35,8
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: MDC2349
- Manufacturer: MINTEX
- EAN number: 5028740783514
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF
- Diameter [mm]: 329,9
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,2
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drill Diameter, up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 C86
- Manufacturer: BOSCH
- EAN number: 4047025482615
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 2EF, 1KJ, 2EW
- Product line: COAT Z
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 36
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,5
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 100.3358.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750611
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- for PR number: 1KD
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 36,2
- Minimum thickness [mm]: 10
- Weight [kg]: 5,150
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 36463
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816364634
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ, 2EF, 2EW
- Diameter [mm]: 330,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,0
- Brake Disc Thickness [mm]: 21,9
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 147,7
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0603
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0272.1
- Manufacturer: ATE
- EAN number: 4006633381420
- Condition: New
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Surface: Painted
- Height [mm]: 36,2
- Brake Disc Thickness [mm]: 22
- for PR number: 1KF, 2EF, 2EW
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Colour: black
- Test Mark: E190R-02C0176 / 0577
- Drilled: no
- Item number: DF6175S
- Manufacturer: TRW
- EAN number: 3322938162634
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KJ
- Construction Year from: 09 / 2018
- Product line: COATED
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36
- Brake Disc Thickness [mm]: 22
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter [mm]: 162
- Weight [kg]: 7,82
- Drilled: no
- Item number: 18196
- Manufacturer: A.B.S.
- EAN number: 8717109528107
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- for PR number: 1KD
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 36
- Minimum thickness [mm]: 10
- Weight [kg]: 5,150
- Number of mounting bores: 1
- Drilled: no
- Item number: ADV184303
- Manufacturer: BLUE PRINT
- EAN number: 5050063006285
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Painted, Cross-hatch
- Height [mm]: 36,3
- Brake Disc Thickness [mm]: 11,8
- for PR number: 1KD
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 153,8
- Article number of recommended accessories: 6115077, 6115078
- Drilled: no
- Item number: 6110125
- Manufacturer: METZGER
- EAN number: 4250032639235
- Condition: New
with cross-grinding