Actual offers of Power steering pump VW Polo V Saloon (602, 604, 612, 614) 1.2 TSI 105 hp Petrol CBZB
- Observe service information
- Manufacturer Restriction: TRW
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Observe technical data
- Service exchange part
- Item number: JER162
- Our price: 333,90 €
- Manufacturer: TRW
- EAN number: 3322938078126
- Condition: Remanufactured
Due to the system's electronic settings, it is only possible to replace this article using a suitable diagnostics tool.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Weight [kg]: 5,300
- Voltage [V]: 12
- Number of connectors: 2
- Vehicle Equipment: for vehicles with electro-hydraulic steering
- Rotation Direction: Clockwise rotation
- Operating Mode: Electric-hydraulic
- Item number: 185451
- Our price: 399,03 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 2210120844509
- Condition: New
price incl. 19% VAT
-
- for PR number: 1KK, 1KT, 1KV
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 28,08 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
-
- for PR number: 2EJ
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2894.2
- Our price: 42,39 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1ZG, 1LR, 1ZJ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: Volkswagen
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0258 / 0212
- MAPP code available
- Item number: 13.0470-7111.2
- Our price: 65,13 €
- Manufacturer: ATE
- EAN number: 4006633339919
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1LN, 1ZC, 1ZD
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,6
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0258 / 0195
- Warning Contact Length [mm]: 155
- MAPP code available
- Item number: 13.0470-7184.2
- Our price: 73,08 €
- Manufacturer: ATE
- EAN number: 4006633340489
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1KK, 1KT, 1KV, 2EJ
- Fitting Position: Rear Axle
- Diameter [mm]: 230,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40,6
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0960
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0123.1
- Manufacturer: ATE
- EAN number: 4006633297707
- Condition: New
-
- for PR number: 1LR, 1ZG, 1ZJ
- Fitting Position: Front Axle
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,7
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0141
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0151.1
- Manufacturer: ATE
- EAN number: 4006633298216
- Condition: New
-
- for PR number: 1LN, 1ZC, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 288,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 34,5
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 136,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0066
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0113.1
- Manufacturer: ATE
- EAN number: 4006633295000
- Condition: New
-
- for PR number: 1ZP, 1ZR
- Fitting Position: Front Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 34,4
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 133,8
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0123.1
- Manufacturer: ATE
- EAN number: 4006633069236
- Condition: New
-
- for PR number: 1LR, 1ZG, 1ZJ
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,7
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0322-0151.1
- Manufacturer: ATE
- EAN number: 1049633066266
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
-
- Fitting Position: Front Axle
- for PR number: 1ZG
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator
- Brake System: Teves
- Thickness [mm]: 19,7
- Height [mm]: 54,7
- Width [mm]: 146
- WVA Number: 23130
- Weight [kg]: 1,5
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2313001
- Our price: 33,59 €
- Manufacturer: TEXTAR
- EAN number: 4019722208805
- Condition: New
-
- for PR number: 2EJ
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 31,20 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
-
- for PR number: 1ZG, 1LR, 1ZJ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: Volkswagen
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- MAPP code available
- Item number: 13.0460-7111.2
- Our price: 45,31 €
- Manufacturer: ATE
- EAN number: 4006633302050
- Condition: New
-
- for PR number: 1LN, 1ZC, 1ZD
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,6
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0194
- Warning Contact Length [mm]: 155
- MAPP code available
- Item number: 13.0460-7184.2
- Our price: 52,82 €
- Manufacturer: ATE
- EAN number: 4006633118033
- Condition: New
-
- for PR number: 1KK, 1KT, 1KV
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2820.2
- Our price: 43,06 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1KK, 1KT, 1KV, 2EJ
- Fitting Position: Rear Axle
- Product line: PowerDisc
- Diameter [mm]: 230,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40,6
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1293
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0309-0123.1
- Manufacturer: ATE
- EAN number: 4006633204705
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
-
- for PR number: 1LN, 1ZC, 1ZD
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 288,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 34,5
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 136,0
- Machining: High-carbon
- MAPP code available
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0113.1
- Manufacturer: ATE
- EAN number: 4006633295017
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
-
- for PR number: 1ZP, 1ZR
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 34,4
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 133,8
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0123.1
- Manufacturer: ATE
- EAN number: 4006633040822
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Height [mm]: 34
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.7010.20
- Manufacturer: BREMBO
- EAN number: 8020584701027
- Condition: New
price incl. 19% VAT