Actual offers of Parts kit, automatic transmission oil change VW Golf IV Hatchback (1J1) 1.9 TDI 4motion 130 hp Diesel ASZ
![105.107.0004 Parts kit, automatic transmission oil change Volkswagen GOLF 1.9TDI 4motion 130 hp 96 kW ASZ 2000 1J1](https://cdn.autodoc.de/brands/thumbs/4342.png?m=0)
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with accessories
- Transmission Code: JF506E, 09A / 09B
- Transmission Type: 5-Speed Automatic Transmission
- Manufacturer Restriction: JATCO
- Capacity [litre]: 5
- Recommended change interval [km]: 40000
- Item number: 105.107.0004
- Our price: 149,10 €
- Manufacturer: TCMATIC
- EAN number: 8445059010266
- Condition: New
![105.106.0002 Parts kit, automatic transmission oil change Volkswagen GOLF 1.9TDI 4motion 130 hp 96 kW ASZ 2001 1J1](https://cdn.autodoc.de/brands/thumbs/4342.png?m=0)
- Quantity Unit: Set
- Supplementary Article / Supplementary Info Info 2: with oil quantity for standard oil change
- Supplementary Article / Supplementary Info: with accessories
- Transmission Code: 01M, AG4
- Transmission Type: 4-Speed Automatic Transmission
- Manufacturer Restriction: GRUPO VAG
- Capacity [litre]: 3
- Recommended change interval [km]: 60000
- Item number: 105.106.0002
- Our price: 181,24 €
- Manufacturer: TCMATIC
- EAN number: 8445059009796
- Condition: New
- Operating Mode: Electric-hydraulic
- Clutch ID: HALDEX GEN I / 1
- Supplementary Article / Supplementary Info Info 2: with seal ring, with bolts / screws, with filter
- Supplementary Article / Supplementary Info: with attachment material
- Fitting Position: Rear Axle
- Capacity [ml]: 275
- Item number: V10-6822
- Our price: 460,72 €
- Manufacturer: VAICO
- EAN number: 4062375274598
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
![73964Set Parts kit, automatic transmission oil change Volkswagen GOLF 1.9TDI 4motion 130 hp 96 kW ASZ 2003 1J1](https://cdn.autodoc.de/brands/thumbs/6558.png?m=0)
- Supplementary Article / Supplementary Info: with accessories
- Transmission Code: 02E, 0D9, DQ 250
- Transmission Type: 6-Speed Automatic Transmission
- Vehicle Equipment: for vehicles with direct shift transmission
- Item number: 73964Set
- Our price: 10,49 €
- Manufacturer: AIC
- EAN number: 4046283739646
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 2EG
- paired article number: FDB1788
- Product line: PREMIER
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 34
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Weight [kg]: 5,58
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Bore Ø [mm]: 65
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 7,5
- Drilled: no
- Item number: DDF1155
- Manufacturer: FERODO
- EAN number: 5016687308891
- Condition: New
price incl. 19% VAT
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- Fitting Position: Front Axle
- for PR number: 1LQ
- Diameter [mm]: 256
- Brake System: ATE
- Brake Disc Type: internally vented
- Height [mm]: 36,8
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1461V
- Manufacturer: LPR
- EAN number: 8032532068687
- Condition: New
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- Fitting Position: Rear Axle
- for PR number: 1KE
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 33,5
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- for article number: A1592P
- Drilled: no
- Item number: A1592P
- Manufacturer: LPR
- EAN number: 8032532068748
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,2
- Production Number: 6010092
- Item number: 6010092
- Our price: 16,64 €
- Manufacturer: KRAFT
- EAN number: 5900427194281
- Condition: New
diese Marke gute Qualität hat.
wel ATE Erstausrüszer ist.
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1KU, 2EE, 2EL
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 28,08 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
der Preis passt.
Markenartikel, bereits verwendet.
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1LE, 1LJ, 1LN, 1ZE, 1ZH, 1ZQ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0460-7122.2
- Our price: 61,30 €
- Manufacturer: ATE
- EAN number: 4006633058230
- Condition: New
Ich habe mich für diese Beläge entschieden, da ich unzufrieden mit der Bremsleistung meiner bisher verbauten hinteren Bremse war. Ich kann sie nur empfehlen. Fühlbar mehr Bremsleistung und weniger Bremsstaubentwicklung. Top 👍
Gute Qualität, gute passgenauigkeit, kaum bremsstaub!
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1KU, 2EE, 2EL
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2820.2
- Our price: 43,06 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Qualität. Verbaue ATE seit 40 Jahren.
Immer gute Erfahrung gemacht
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1KE
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2894.2
- Our price: 42,39 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Ceramic = weniger Bremsstaub auf den Felgen
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1LE, 1LJ, 1LN, 1ZE, 1ZH, 1ZQ
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1242 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0470-7122.2
- Our price: 87,37 €
- Manufacturer: ATE
- EAN number: 4006633091756
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1KE
- Fitting Position: Rear Axle
- Diameter [mm]: 239,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 33,4
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 132,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1150
- Bore Ø [mm]: 15,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0133.1
- Manufacturer: ATE
- EAN number: 4006633031509
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KE
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 33,5
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Machining: Untreated
- Test Mark: E1 90R-02C0967 / 2516
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3738
- Manufacturer: DELPHI
- EAN number: 5012759280355
- Condition: New
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- Fitting Position: Front Axle
- for PR number: 1LE, 1LN, 1ZE, 1ZH
- Diameter [mm]: 288
- Brake System: TRW
- Brake Disc Type: internally vented
- Height [mm]: 34,2
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1451V
- Manufacturer: LPR
- EAN number: 8032532068670
- Condition: New
price incl. 19% VAT
Super und top Leistung
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- Fitting Position: Front Axle
- for PR number: 1LR, 1LS, 1ZF, 1ZM
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Height [mm]: 36,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1471V
- Manufacturer: LPR
- EAN number: 8032532068694
- Condition: New
Kaufe nur ATE Bremsen
Erstausrüster Qualität für wenig Geld
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1KE
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 31,20 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
Super Qualität!!
Weil die Qualität stimmt
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1LR, 1LS, 1ZM
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,7
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0479
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0150.1
- Manufacturer: ATE
- EAN number: 4006633298193
- Condition: New
ATE Bremsscheiben kaufe ich vor allem für meinen BMW da sie Erstausrüster sind.
Wie immer gewohnt gute Qualität von ATE erhalten. Empfehl ich weiter 👍🏻
-
- Construction Year from: 04 / 2001
- Construction Year to: 10 / 2003
- for PR number: 1LQ, 1ZF
- Fitting Position: Front Axle
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,7
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0141
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0151.1
- Manufacturer: ATE
- EAN number: 4006633298216
- Condition: New