TOYOTA LAND CRUISER (KDJ12_, GRJ12_) 4.0 (GRJ120) (179 kW / 243 hp) 2002
Vehicle details
Change
Info: Prado 120 4.0 (GRJ120)
Type:
4.0 (GRJ120)
Manuf. year (from - to):
09.2002 - 08.2010
Car body:
Car body type:
Closed Off-Road Vehicle
Type of drive:
All-wheel Drive
Technical data:
Power [kW]:
179
Power [hp]:
243
Cylinder capacity (cc):
3956
Cylinders:
6
Valves per combustion chamber:
4
Engine type:
Petrol Engine
1GR-FE
Transmission:
---
Fuel type:
Petrol
Fuel handling:
Intake Manifold Injection / Carburettor
Braking system:
...
Vehicle identification number
...
Actual offers of Oil sump Prado 120 4.0 243 hp Petrol 1GR-FE
4 items
NTY BMO-TY-004 Oil sump with bore for oil-level sensor, without bore for oil level sensor, Lower
Article number: BMO-TY-004
Submit a review
- Supplementary Article / Supplementary Info Info 2: with bore for oil-level sensor, without bore for oil level sensor
- Fitting Position: Lower
- Fabrication Number: BMO-TY-004
- Item number: BMO-TY-004
- Our price: 29,39 €
- Manufacturer: NTY
- EAN number: 5902048066565
- Condition: New
Show OEM numbers of the product
Information on the disposal of used oil
Details
ACKOJA A70-0429 Oil sump with oil drain plug, with seal ring, without oil sump gasket, Sheet Steel, Lower
Article number: A70-0429
Submit a review
- Supplementary Article / Supplementary Info Info 2: with seal ring, without oil sump gasket
- Oil Sump Material: Sheet Steel
- Surface: Powder coated
- Supplementary Article / Supplementary Info: with oil drain plug
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- See accessories list for additionally required parts
- Fitting Position: Lower
- Length [mm]: 290
- Width [mm]: 152
- Section: Lower Section
- Weight [kg]: 0,76
- Height [mm]: 98
- Packaging width [cm]: 31,6
- Packaging height [cm]: 14,5
- Packaging Depth [cm]: 22
- Item number: A70-0429
- Our price: 39,88 €
- Manufacturer: ACKOJA
- EAN number: 4062375023196
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
VAICO V70-0429 Oil sump with oil drain plug, with seal ring, without oil sump gasket, Sheet Steel, Original VAICO Quality, Lower
Article number: V70-0429
Submit a review
- Supplementary Article / Supplementary Info Info 2: with seal ring, without oil sump gasket
- Oil Sump Material: Sheet Steel
- Surface: Powder coated
- Supplementary Article / Supplementary Info: with oil drain plug
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- See accessories list for additionally required parts
- Fitting Position: Lower
- Length [mm]: 290
- Width [mm]: 152,0
- Section: Lower Section
- Weight [kg]: 0,9748
- Height [mm]: 98
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 14,5
- Packaging height [cm]: 22
- Packaging Depth [cm]: 31,6
- Item number: V70-0429
- Our price: 67,16 €
- Manufacturer: VAICO
- EAN number: 4046001784101
- Condition: New
Show OEM numbers of the product
Contents of the Oil sump VAICO set:
Description of the product
Units
Article number
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
KUNZER 78815 Repair Kit, wet sump
Article number: 78815
Reviews - 11
- Thread Size: M15x1.5
- Supplementary Article / Supplementary Info: with oil drain plug
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Number of tools: 6
- Packaging: in tool module (soft PU foam inlay), Plastic Case
- Item number: 78815
- Our price: 39,00 €
- Manufacturer: KUNZER
- EAN number: 4260625441817
- Condition: New
Details
TOYOTA LAND CRUISER (KDJ12_, GRJ12_) 4.0 (GRJ120) Bestsellers
ATE 24.0118-0709.1 Brake disc Rear Axle, 312,0x18,0mm, 6x139,7, Vented, Coated
Article number: 24.0118-0709.1
Reviews - 1
- Fitting Position: Rear Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 68,0
- Brake Disc Thickness [mm]: 18,0
- Centering Diameter [mm]: 106,0
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 139,7
- Minimum thickness [mm]: 16,0
- Inner Diameter [mm]: 210,0
- MAPP code available
- Bore Ø [mm]: 14,5
- Drilled: no
- Item number: 24.0118-0709.1
- Manufacturer: ATE
- EAN number: 4006633297417
- Condition: New
Show OEM numbers of the product
Details
ATE 24.0128-0194.1 Brake disc Front Axle, 338,0x28,0mm, 6x139,7, Vented, Coated
Article number: 24.0128-0194.1
Reviews - 3
- Fitting Position: Front Axle
- Diameter [mm]: 338,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 67,5
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 108,0
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 139,7
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 172,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0399
- Bore Ø [mm]: 14,5
- Drilled: no
- Item number: 24.0128-0194.1
- Manufacturer: ATE
- EAN number: 4006633297790
- Condition: New
Show OEM numbers of the product
Details
VALEO 598857 Brake pad set Front Axle, incl. wear warning contact, with anti-squeak plate
Article number: 598857
Submit a review
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Brake System: SUMITOMO
- Thickness [mm]: 17,2
- Number of wear indicators [per axle]: 2
- Height [mm]: 77,1
- Width [mm]: 134
- WVA Number: 24024
- Test Mark: ECE-R90
- Weight [kg]: 2,1
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Operating Mode: Mechanical
- Item number: 598857
- Our price: 41,84 €
- Manufacturer: VALEO
- EAN number: 3276425988576
- Condition: New
Show OEM numbers of the product
Additional information
1923-2023: 100 years of braking
Details
BOSCH 0 986 479 304 Brake disc Front Axle, 337,8x28mm, 6x139,7, Vented, Oiled
Article number: 0 986 479 304
Reviews - 2
-
- Construction Year from: 01 / 2003
- Construction Year to: 08 / 2009
- Fitting Position: Front Axle
- Diameter [mm]: 337,8
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 67,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 108
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 139,7
- Minimum thickness [mm]: 26
- Drill Diameter, up to [mm]: 14,6
- Drilled: no
- Item number: 0 986 479 304
- Manufacturer: BOSCH
- EAN number: 4047024233775
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 494 153 Brake pad set Front Axle, Low-Metallic, with acoustic wear warning
Article number: 0 986 494 153
Reviews - 9
-
- Construction Year from: 01 / 2003
- Construction Year to: 08 / 2009
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Material: Low-Metallic
- Thickness [mm]: 17
- Height [mm]: 77,1
- Width [mm]: 134,6
- WVA Number: 24024
- Test Mark: ECE-R90
- Manufacturer Restriction: SUMITOMO System
- Article number of recommended accessories: 1 987 474 350
- Item number: 0 986 494 153
- Our price: 35,64 €
- Manufacturer: BOSCH
- EAN number: 4047024304581
- Condition: New
Show OEM numbers of the product
Details
FERODO PREMIER ECO FRICTION FDB1698 Brake pad set Front Axle, with acoustic wear warning, without accessories
Article number: FDB1698
Reviews - 3
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Sumitomo
- Thickness [mm]: 17
- Number of wear indicators [per axle]: 2
- Height [mm]: 77,1
- Width [mm]: 134,5
- WVA Number: 24024
- Test Mark: R90 Homologated
- Weight [kg]: 1,85
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 20,4
- Packaging width [cm]: 12,6
- Packaging height [cm]: 7,8
- Item number: FDB1698
- Our price: 35,61 €
- Manufacturer: FERODO
- EAN number: 5016687335675
- Condition: New
Show OEM numbers of the product
Details
BREMBO P 83 024 Brake pad set Rear Axle, excl. wear warning contact, without accessories
Article number: P 83 024
Reviews - 18
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Sumitomo
- Thickness [mm]: 15
- Height [mm]: 44
- Width [mm]: 116
- WVA Number: 21947
- Item number: P 83 024
- Our price: 20,88 €
- Manufacturer: BREMBO
- EAN number: 8020584057599
- Condition: New
Show OEM numbers of the product
Details
BREMBO P 83 066 Brake pad set Front Axle, with acoustic wear warning, without accessories
Article number: P 83 066
Reviews - 15
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Sumitomo
- Thickness [mm]: 18
- Number of wear indicators [per axle]: 2
- Height [mm]: 77
- Width [mm]: 135
- WVA Number: 24024, 24025, 24026
- Item number: P 83 066
- Our price: 32,09 €
- Manufacturer: BREMBO
- EAN number: 8020584058015
- Condition: New
Show OEM numbers of the product
Details
HERTH+BUSS JAKOPARTS J3312041 Brake disc Rear Axle, 312x18mm, 6x140, internally vented, Coated
Article number: J3312041
Submit a review
- Fitting Position: Rear Axle
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 68,4
- Brake Disc Thickness [mm]: 18
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 140
- Minimum thickness [mm]: 16
- Inner Diameter [mm]: 206,6
- Hub Diameter [mm]: 106
- No. of holes 1: 6
- No. of holes 2: 2
- Fulfils ECE norm: E1 90R-02C0119 / 0178
- Drilled: no
- Item number: J3312041
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416132989
- Condition: New
Show OEM numbers of the product
Details
DELPHI BG3557 Brake disc Rear Axle, 312x18mm, 6, Vented, Oiled, Untreated
Article number: BG3557
Submit a review
- Fitting Position: Rear Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 68
- Brake Disc Thickness [mm]: 18
- Centering Diameter [mm]: 106
- Number of Holes: 6
- Minimum thickness [mm]: 16
- Machining: Untreated
- Test Mark: E1 90R-02C0502 / 2172
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3557
- Manufacturer: DELPHI
- EAN number: 5012759159408
- Condition: New
Show OEM numbers of the product
Details
DELPHI BG4052 Brake disc Front Axle, 338x28mm, 6, Vented, Oiled, Untreated
Article number: BG4052
Reviews - 1
- Fitting Position: Front Axle
- Diameter [mm]: 338
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 67,3
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 108
- Number of Holes: 6
- Minimum thickness [mm]: 26
- Machining: Untreated
- Test Mark: E1 90R-02C0277 / 2318
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG4052
- Manufacturer: DELPHI
- EAN number: 5012759386316
- Condition: New
Show OEM numbers of the product
Details
ATE 13.0460-5744.2 Brake pad set Rear Axle, not prepared for wear indicator, excl. wear warning contact
Article number: 13.0460-5744.2
Reviews - 4
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Thickness [mm]: 15,4
- Height [mm]: 44,0
- Width [mm]: 116,2
- Test Mark: E9 90R-02A1379 / 0274
- MAPP code available
- Item number: 13.0460-5744.2
- Our price: 41,51 €
- Manufacturer: ATE
- EAN number: 4006633309509
- Condition: New
Show OEM numbers of the product
Details
ATE 13.0460-5747.2 Brake pad set Front Axle, with acoustic wear warning
Article number: 13.0460-5747.2
Reviews - 4
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 17,0
- Height [mm]: 76,9
- Width [mm]: 134,2
- Test Mark: E1 90R-011134 / 1008
- MAPP code available
- Article number of recommended accessories: 13.0460-0533.2
- Item number: 13.0460-5747.2
- Our price: 62,11 €
- Manufacturer: ATE
- EAN number: 4006633327336
- Condition: New
Show OEM numbers of the product
Details
BOSCH 0 986 424 313 Brake pad set Rear Axle, Low-Metallic, with mounting manual
Article number: 0 986 424 313
Reviews - 9
-
- Construction Year from: 01 / 2003
- Construction Year to: 08 / 2009
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Material: Low-Metallic
- Thickness [mm]: 13,4
- Height [mm]: 44,2
- Width [mm]: 116,1
- WVA Number: 21947
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Manufacturer Restriction: SUMITOMO System
- Item number: 0 986 424 313
- Our price: 20,55 €
- Manufacturer: BOSCH
- EAN number: 3165143659571
- Condition: New
Show OEM numbers of the product
Details
FERODO PREMIER ECO FRICTION FDB1021 Brake pad set Rear Axle, not prepared for wear indicator, without accessories
Article number: FDB1021
Reviews - 3
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Akebono
- Thickness [mm]: 15,5
- Height [mm]: 44
- Width [mm]: 117
- WVA Number: 21947
- Test Mark: R90 Homologated
- Weight [kg]: 0,86
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 10,6
- Packaging height [cm]: 4,4
- Item number: FDB1021
- Our price: 28,76 €
- Manufacturer: FERODO
- EAN number: 5016687087871
- Condition: New
Show OEM numbers of the product
Details
DELPHI LP1782 Brake pad set Front Axle, with acoustic wear warning, with anti-squeak plate, without accessories
Article number: LP1782
Reviews - 2
-
- Fitting Position: Front Axle
- Construction Year from: 01 / 2003
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Sumitomo
- Height 1 [mm]: 77,1
- Height 2 [mm]: 77,1
- Width 2 [mm]: 134,5
- Width 1 [mm]: 134,6
- Thickness 1 [mm]: 17,8
- Thickness 2 [mm]: 17,8
- WVA Number: 24024 24025 24026
- Test Mark: E9 90R-02A0841 / 1214
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- FMSI Code: D976
- Friction Lining Material: Low-Metallic
- Item number: LP1782
- Our price: 28,88 €
- Manufacturer: DELPHI
- EAN number: 5012759231326
- Condition: New
Show OEM numbers of the product
Additional information
2 plain pads, 2 pads + spring W.I.
Details
Find the best offers on