It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Nut, Tyre pressure sensor (tpms), Repair kit, Wheel sensor (tyre pressure control system) K56029398AA
All spare parts in the list below are equivalent to OEM number K56029398AA:
- K56029398AA (original number of CHRYSLER)
- K56029398AA (original number of ALFA ROMEO)
- K56029398AA (original number of FIAT)
- K56029398AA (original number of LANCIA)
- Housing Colour: black
- Supplementary Article / Supplementary Info Info 2: with valves
- Frequency Range [Hz]: 433
- Item number: 2232W0105
- Manufacturer: RIDEX
- EAN number: 4067448583904
- Condition: New
- Reference number OEM: K56029398AA
- Housing Colour: black
- Supplementary Article / Supplementary Info Info 2: with valves
- Frequency Range [Hz]: 433
- Item number: SKWS-1400104
- Manufacturer: STARK
- EAN number: 4067448583898
- Condition: New
- Reference number OEM: K56029398AA
- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Supplementary Article / Supplementary Info Info 2: with valves, with screw
- Frequency Range [MHz]: 433
- Full Set
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Valve stem material: Aluminium
- for OE number: 5430.T4
- Supplementary Info: EXPERT KITS +
- Observe the vehicle manufacturer specifications
- pre-programmed
- Item number: V22-72-0135
- Manufacturer: VEMO
- EAN number: 4046001895968
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure to [bar]: 9
- Tightening torque to [Nm]: 4
- Supplementary Article / Supplementary Info Info 2: with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw
- Supplementary Article / Supplementary Info: with battery
- Information Transfer: Radio
- Weight [g]: 46
- Material: Aluminium
- Article number of the recommended special tool: 95990021
- only in connection with: 95990021
- Number of bolts / screws: 1
- Frequency Range [MHz]: 433, 434
- Supported by: De-Minimis
- Valve colour: silver
- Number of valves: 1
- Lithium weight [g]: 0,1
- Item number: 70699443
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736415365
- Condition: New
- Reference number OEM: K56029398AA
Herth+Buss wheel sensors can be used in all vehicles that have a tyre pressure monitoring system installed as standard. The programming device AirGuard 95990001/- 021 is required for the programming and adjustment of the sensors of each vehicle. This process only takes between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, used in aluminium and steel rims and wirelessly activated. The sensors can be ordered individually and are supplied with the complete valve in standard silver. A valve repair kit is also available, as are replacement valves in silver and black. • one for all: optimum stockage with just one universal wheel sensor • valves with adjustable angles • for steel or aluminium rims • certification up to 250 km/h • battery service life: 3-7 years • only programmable in connection with AirGuard 95990001/-021
- for article number: 780083
- Quality: GENUINE
- Item number: 780083
- Manufacturer: SIDAT
- EAN number: 2227102082390
- Condition: New
- Reference number OEM: K56029398AA
- Item number: 80084
- Manufacturer: MEAT & DORIA
- EAN number: 808888899522
- Condition: New
- Reference number OEM: K56029398AA
- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Supplementary Article / Supplementary Info Info 2: with valves, with screw
- Frequency Range [MHz]: 433
- Full Set
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Valve stem material: Aluminium
- Weight [kg]: 0,025
- for OE number: A 000 905 18 04
- Supplementary Info: EXPERT KITS +
- Observe the vehicle manufacturer specifications
- pre-programmed
- Item number: V30-72-0224
- Manufacturer: VEMO
- EAN number: 4046001896132
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: 780083
- Quality: GENUINE
- Item number: 780083
- Manufacturer: FISPA
- EAN number: 8033208193634
- Condition: New
- Reference number OEM: K56029398AA
- for article number: V99-72-5004
- Weight [kg]: 0,016
- Packaging width [cm]: 4
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Product line: EXPERT KITS +
- Item number: V99-72-5004
- Manufacturer: VEMO
- EAN number: 4046001654596
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5007
- Weight [kg]: 0,02
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5007
- Manufacturer: VEMO
- EAN number: 4046001654626
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5010
- Weight [kg]: 0,014
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5010
- Manufacturer: VEMO
- EAN number: 4046001654657
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5008
- Weight [kg]: 0,017
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5008
- Manufacturer: VEMO
- EAN number: 4046001654633
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: EXPERT KITS +
- for article number: V99-72-5005
- Weight [kg]: 0,019
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5005
- Manufacturer: VEMO
- EAN number: 4046001654602
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5006
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5006
- Manufacturer: VEMO
- EAN number: 4046001654619
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5009
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5009
- Manufacturer: VEMO
- EAN number: 4046001654640
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5011
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5011
- Manufacturer: VEMO
- EAN number: 4046001654664
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5013
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5013
- Manufacturer: VEMO
- EAN number: 4046001654589
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for article number: V99-72-5012
- Weight [kg]: 0,016
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Product line: EXPERT KITS +
- Item number: V99-72-5012
- Manufacturer: VEMO
- EAN number: 4046001654565
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Q+, original equipment manufacturer quality
- for OE number: 52934-A5000
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Weight [kg]: 0,006
- Recommended change interval [years]: 5
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5002
- Our price: 6,73 €
- Manufacturer: VEMO
- EAN number: 4046001653667
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Q+, original equipment manufacturer quality
- Alternatively
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Recommended change interval [years]: 5
- Weight [kg]: 0,046
- Packaging width [cm]: 5,8
- Packaging height [cm]: 3,3
- Packaging Depth [cm]: 3
- Item number: V99-72-5001
- Our price: 8,73 €
- Manufacturer: VEMO
- EAN number: 4046001653650
- Condition: New
- Reference number OEM: K56029398AA
- Weight [g]: 32
- Fitting Position: Rear Axle both sides, Front axle both sides
- Hole Pitch 1 / Hole Pitch 2: 433
- Item number: 750007
- Manufacturer: VEMA
- EAN number: 8056972127667
- Condition: New
- Reference number OEM: K56029398AA
- Pressure to [bar]: 9
- Tightening torque to [Nm]: 4
- Supplementary Article / Supplementary Info Info 2: with pressure sensor, with integrated air temperature sensor, with valves, with seal ring, with box nut, with screw
- Supplementary Article / Supplementary Info: with battery
- Information Transfer: Radio
- Weight [g]: 46
- Material: Aluminium
- Article number of the recommended special tool: 95990021
- only in connection with: 95990021
- Number of bolts / screws: 1
- Frequency Range [MHz]: 433, 434
- Supported by: De-Minimis
- Valve colour: anthracite
- Number of valves: 1
- Item number: 70699444
- Manufacturer: HERTH+BUSS ELPARTS
- EAN number: 4026736415358
- Condition: New
- Reference number OEM: K56029398AA
Herth+Buss wheel sensors can be used in all vehicles that have a tyre pressure monitoring system installed as standard. The programming device AirGuard 95990001/- 021 is required for the programming and adjustment of the sensors of each vehicle. This process only takes between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, used in aluminium and steel rims and wirelessly activated. The sensors can be ordered individually and are supplied with the complete valve in standard silver. A valve repair kit is also available, as are replacement valves in silver and black. • one for all: optimum stockage with just one universal wheel sensor • valves with adjustable angles • for steel or aluminium rims • certification up to 250 km/h • battery service life: 3-7 years • only programmable in connection with AirGuard 95990001/-021
- Item number: 7480082
- Manufacturer: HOFFER
- EAN number: 803341953015
- Condition: New
- Reference number OEM: K56029398AA
- Item number: 80082
- Manufacturer: MEAT & DORIA
- EAN number: 803341953014
- Condition: New
- Reference number OEM: K56029398AA
- Frequency Range [MHz]: 433
- Pressure to [bar]: 5,5
- Tightening torque to [Nm]: 1,3
- Item number: 80080
- Manufacturer: MEAT & DORIA
- EAN number: 22100653003851300385
- Condition: New
- Reference number OEM: K56029398AA
- Item number: 7480083
- Manufacturer: HOFFER
- EAN number: 808888898564
- Condition: New
- Reference number OEM: K56029398AA
- Item number: 80083
- Manufacturer: MEAT & DORIA
- EAN number: 808888899521
- Condition: New
- Reference number OEM: K56029398AA
- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Supplementary Article / Supplementary Info Info 2: with valves, with screw
- Frequency Range [MHz]: 433
- Full Set
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Valve stem material: Aluminium
- Weight [kg]: 0,025
- for OE number: 52933-1J000
- Supplementary Info: EXPERT KITS +
- Observe the vehicle manufacturer specifications
- pre-programmed
- Item number: V52-72-0230
- Manufacturer: VEMO
- EAN number: 4046001896101
- Condition: New
- Reference number OEM: K56029398AA
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Valve type: Air Valve
- Vehicle Equipment: for vehicles with tyre-pressure monitoring system
- Frequency Range [MHz]: 433
- Recommended change interval [km]: 160000
- Recommended change interval [years]: 5
- Weight [kg]: 0,048
- Observe the vehicle manufacturer specifications
- Packaging width [cm]: 6,8
- Packaging height [cm]: 3, 9,2
- Packaging Depth [cm]: 9, 7,4
- Item number: V99-72-4029
- Manufacturer: VEMO
- EAN number: 4046001616181
- Condition: New
- Reference number OEM: K56029398AA
- Item number: 7480084
- Manufacturer: HOFFER
- EAN number: 2234115302721
- Condition: New
- Reference number OEM: K56029398AA
- 1
- 2