It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Suspension arm, Track rod end, Link set, Wheel suspension GSJ413
All spare parts in the list below are equivalent to OEM number GSJ 413:
- GSJ 413 (original number of ROVER)
- GSJ 413 (original number of HONDA)
- GSJ 413 (original number of MG)
- Fitting Position: Lower Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Cone Size [mm]: 15
- Supplementary Article / Supplementary Info: with accessories
- Thread size 3: M12x1.25
- Item number: 273C0777
- Manufacturer: RIDEX
- EAN number: 4059191709090
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Lower Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Cone Size [mm]: 15
- Supplementary Article / Supplementary Info: with accessories
- Thread size 3: M12x1.25
- Item number: SKCA-0050775
- Manufacturer: STARK
- EAN number: 4059191461547
- Condition: New
- Reference number OEM: GSJ413
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- paired article number: V49-9503
- Weight [kg]: 2,224
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Item number: V49-9502
- Manufacturer: VAICO
- EAN number: 4046001410871
- Condition: New
- Reference number OEM: GSJ413
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 329,5
- paired article number: VKDS 823001 B
- Thread Size 1: M12 x 1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Bore Ø [mm]: 10,2
- Item number: VKDS 823000 B
- Manufacturer: SKF
- EAN number: 7316579255851
- Condition: New
- Reference number OEM: GSJ413
- Material: Steel
- Control / Trailing Arm Type: Trailing Arm
- Length [mm]: 350
- Height [mm]: 80
- paired article number: TC431
- Thread Size 1: M12x1.25
- Thread Size 2: M12x1.25
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 80
- Item number: TC432
- Manufacturer: DELPHI
- EAN number: 5012759858349
- Condition: New
- Reference number OEM: GSJ413
- Supplementary Info: Original VAICO Quality
- Fitting Position: Left, Lower Front Axle
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: V49-9502
- Weight [kg]: 2,224
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Item number: V49-9503
- Manufacturer: VAICO
- EAN number: 4046001410888
- Condition: New
- Reference number OEM: GSJ413
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
![SIDEM 65380](https://cdn.autodoc.de/brands/thumbs/135.png?m=0)
- Fitting Position: Front Axle Left
- Material: Steel
- Control / Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 15
- paired article number: 65381
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 65380
- Manufacturer: SIDEM
- EAN number: 5413978135967
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Left, Lower, Front Axle
- Control / Trailing Arm Type: Control Arm
- paired article number: RO-TC-3551P
- Packing Type: Bag
- Packaging length [cm]: 37,5
- Packaging width [cm]: 11
- Packaging height [cm]: 10
- Item number: RO-TC-3550P
- Manufacturer: MOOG
- EAN number: 4044197640379
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle Left
- Material: Steel
- Control / Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 15
- paired article number: 46293
- Rod / Strut: Push Rod
- only in connection with: Ball joint
- Observe service information
- Item number: 46292
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978845804
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle Left, Lower
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: 12926
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Weight [kg]: 2,096
- Supplementary Article / Supplementary Info: with lock nuts
- Item number: 12925
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816129257
- Condition: New
- Reference number OEM: GSJ413
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: 26-06622-1
- Weight [kg]: 2,19
- Item number: 26-06622-2
- Manufacturer: DYS
- EAN number: 8435229416783
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Left, Lower, Front Axle
- Control / Trailing Arm Type: Control Arm
- paired article number: RO-TC-3551
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Packing Type: Box
- Packaging length [cm]: 41,5
- Packaging width [cm]: 11
- Packaging height [cm]: 8
- Item number: RO-TC-3550
- Manufacturer: MOOG
- EAN number: 5010874752894
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Item number: 3440100970
- Manufacturer: JP GROUP
- EAN number: 5710412561895
- Condition: New
- Reference number OEM: GSJ413
- Control / Trailing Arm Type: Control Arm
- paired article number: 821 0439 10
- Item number: 821 0438 10
- Manufacturer: FAG
- EAN number: 4014870421489
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- paired article number: G5-555
- Registration Type: TÜV® / GS approved
- Item number: G5-554
- Manufacturer: OPTIMAL
- EAN number: 4031185955546
- Condition: New
- Reference number OEM: GSJ413
TÜV CERTIFIED
![SWAG 22 73 0001](https://cdn.autodoc.de/brands/thumbs/1156.png?m=0)
- Fitting Position: Front Axle Left, Lower
- Material: Cast Steel
- Control / Trailing Arm Type: Control Arm
- paired article number: 22 73 0002
- Supplementary Article / Supplementary Info Info 2: with bearing(s), with ball joint
- Weight [kg]: 2,096
- Supplementary Article / Supplementary Info: with lock nuts
- Item number: 22 73 0001
- Manufacturer: SWAG
- EAN number: 4044688503503
- Condition: New
- Reference number OEM: GSJ413
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 19,5
- paired article number: QSJ1231S
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Item number: QSJ1230S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593274938
- Condition: New
- Reference number OEM: GSJ413
![OCAP 0392535](https://cdn.autodoc.de/brands/thumbs/481.png?m=0)
- Fitting Position: Left
- Control / Trailing Arm Type: Control Arm
- paired article number: 0382535
- Item number: 0392535
- Manufacturer: OCAP
- EAN number: 2248127142030
- Condition: New
- Reference number OEM: GSJ413
- Control / Trailing Arm Type: Control Arm
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- paired article number: JTC234
- Supplementary Article / Supplementary Info: with accessories
- Item number: JTC233
- Manufacturer: TRW
- EAN number: 5012445838273
- Condition: New
- Reference number OEM: GSJ413
price incl. 19% VAT
- Fitting Position: Front Axle Right
- Overall Length [mm]: 376
- Overall Height [mm]: 81
- External Thread 1 [mm]: 12 x 1,25
- Fitted Diameter [mm]: 15,2
- Inner Diameter [mm]: 10
- Item number: TI-488R
- Manufacturer: JAPANPARTS
- EAN number: 8033001876017
- Condition: New
- Reference number OEM: GSJ413
![JAPANPARTS TI-488L](https://cdn.autodoc.de/brands/thumbs/193.png?m=0)
- Fitting Position: Front Axle Left
- Overall Height [mm]: 81
- External Thread 1 [mm]: 12 x 1,25
- Fitted Diameter [mm]: 15
- Inner Diameter [mm]: 10
- Item number: TI-488L
- Manufacturer: JAPANPARTS
- EAN number: 8033001875980
- Condition: New
- Reference number OEM: GSJ413
- Control / Trailing Arm Type: Control Arm
- paired article number: J4914021
- Article number of the recommended special tool: J9420000
- Item number: J4904021
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416173975
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Left
- Control / Trailing Arm Type: Control Arm
- Item number: J34021YMT
- Manufacturer: YAMATO
- EAN number: 5901170601866
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Triangular Control Arm (CV)
- paired article number: 9005197
- Supplementary Article / Supplementary Info Info 2: with ball joints
- for OE number: RBJ100791
- Item number: 9005198
- Manufacturer: SASIC
- EAN number: 3660872330710
- Condition: New
- Reference number OEM: GSJ413
With ball joint
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Trailing Arm
- Cone Size [mm]: 15
- Cone Pitch: 1 / 8
- Item number: D120500
- Manufacturer: DENCKERMANN
- EAN number: 2218610976301
- Condition: New
- Reference number OEM: GSJ413
![FLENNOR FL443-F](https://cdn.autodoc.de/brands/thumbs/10016.png?m=0)
- Fitting Position: Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Item number: FL443-F
- Manufacturer: FLENNOR
- EAN number: 4030434046271
- Condition: New
- Reference number OEM: GSJ413
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 330
- Cone Size [mm]: 15, 17,5
- paired article number: 79671AL
- Thread Size: M12 x 1,5
- Inner Diameter [mm]: 10
- Item number: 79670AL
- Manufacturer: ALTE AUTOMOTIVE
- EAN number: 225627220955172209551
- Condition: New
- Reference number OEM: GSJ413
![FAI AutoParts SS218](https://cdn.autodoc.de/brands/thumbs/10179.png?m=0)
- Control / Trailing Arm Type: Control Arm
- Required quantity: 1
- Item number: SS218
- Manufacturer: FAI AutoParts
- EAN number: 2226712112764
- Condition: New
- Reference number OEM: GSJ413
![RUVILLE 936100](https://cdn.autodoc.de/brands/thumbs/23.png?m=0)
- Control / Trailing Arm Type: Control Arm
- paired article number: 821 0439 10
- Item number: 936100
- Manufacturer: RUVILLE
- EAN number: 4011442587796
- Condition: New
- Reference number OEM: GSJ413
- Control / Trailing Arm Type: Trailing Arm
- Net weight [kg]: 2,42
- Item number: 5014001
- Manufacturer: NK
- EAN number: 5703858460488
- Condition: New
- Reference number OEM: GSJ413
- 1
- 2