It is necessary to choose your car model, otherwise you risk buying an item that does not fit. Please note that our search function only provides results relevant to a certain vehicle type.
Brake disc 0569059
All spare parts in the list below are equivalent to OEM number 05 69 059:
- 05 69 059 (original number of OPEL)
- 05 69 059 (original number of VAUXHALL)
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 23,8
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Weight [kg]: 5,474
- Bore Ø [mm]: 14,3
- Brake Disc Hub Height [mm]: 17
- Packaging width [cm]: 26
- Packaging height [cm]: 9
- Packaging Depth [cm]: 26
- Fulfils ECE norm: R90
- Drilled: no
- Item number: V40-80037
- Manufacturer: VAICO
- EAN number: 4046001279164
- Condition: New
- Reference number OEM: 0569059
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41
- Minimum thickness [mm]: 21
- Weight [kg]: 4,45
- Number of mounting bores: 1
- for OE number: 05 69 059
- Drilled: no
- Item number: ADZ94321
- Manufacturer: BLUE PRINT
- EAN number: 5050063943214
- Condition: New
- Reference number OEM: 0569059
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Surface: Painted, Cross-hatch
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21,0
- Inner Diameter [mm]: 120,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Article number of recommended accessories: 6115024
- Fulfils ECE norm: R90
- Drilled: no
- Item number: 6110031
- Manufacturer: METZGER
- EAN number: 4250032638283
- Condition: New
- Reference number OEM: 0569059
with cross-grinding
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41,1
- Minimum thickness [mm]: 21
- Weight [kg]: 4,45
- Number of mounting bores: 1
- for OE number: 05 69 059
- Drilled: no
- Item number: 17210
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816172109
- Condition: New
- Reference number OEM: 0569059
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 133
- Replace in pairs only
- Drilled: no
- Item number: 205 523
- Manufacturer: TOPRAN
- EAN number: 5690510000024
- Condition: New
- Reference number OEM: 0569059
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Wheel Bolt Bore Ø [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Required quantity: 2
- Drilled: no
- Item number: 615 521 0009
- Manufacturer: MEYLE
- EAN number: 4040074201008
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
![AUTOMEGA 120068110](https://cdn.autodoc.de/brands/thumbs/10388.png?m=0)
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Alternatively
- Drilled: no
- Item number: 120068110
- Manufacturer: AUTOMEGA
- EAN number: 2232389012330
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented, Vented
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Number of Holes: 4
- Drilled: no
- Item number: 1263105100
- Manufacturer: JP GROUP
- EAN number: 5710412609160
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Painted
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 23,9
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Weight [kg]: 5,1
- Test Mark: E1 90R 02C0176 / 0531
- Drilled: no
- Item number: 19-0772MAX
- Manufacturer: MAXGEAR
- EAN number: 5907558557381
- Condition: New
- Reference number OEM: 0569059
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Painted
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 23,9
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Test Mark: E1 90R 02C0176 / 0531
- Drilled: no
- Item number: 19-0772
- Manufacturer: MAXGEAR
- EAN number: 5907558539233
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 4 / 7
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 11
- Drilled: no
- Item number: BS-5720C
- Manufacturer: OPTIMAL
- EAN number: 4031185488204
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41
- Minimum thickness [mm]: 21
- Weight [kg]: 4
- Component Number: BSG 65-210-015
- Drilled: no
- Item number: BSG 65-210-015
- Manufacturer: BSG
- EAN number: 8719822070376
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Minimum thickness [mm]: 21
- Weight [kg]: 4,8
- Fulfils ECE norm: E1
- Drilled: no
- Item number: RD00591
- Manufacturer: RAICAM
- EAN number: 8019951055917
- Condition: New
- Reference number OEM: 0569059
- Supplementary Info: QH
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Hole Arrangement / Number: 7 / 4
- Drilled: no
- Item number: 1263102009
- Manufacturer: JP GROUP
- EAN number: 5710412264420
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle Left, Front Axle Right
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Replace in pairs only
- Drilled: no
- Item number: 53622
- Manufacturer: AIC
- EAN number: 4046283536221
- Condition: New
- Reference number OEM: 0569059
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 133
- Drilled: no
- Item number: 30H9033-JPN
- Manufacturer: JPN
- EAN number: 226985177947041779470
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 4 / 7
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 11
- Drilled: no
- Item number: BS-5720
- Manufacturer: OPTIMAL
- EAN number: 4031185165167
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Hole Arrangement / Number: 7 / 4
- Drilled: no
- Item number: 1263102000
- Manufacturer: JP GROUP
- EAN number: 5710412066192
- Condition: New
- Reference number OEM: 0569059
- Supplementary Info: MEYLE-PD Quality
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: UV paint coated
- Height [mm]: 41.1
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Wheel Bolt Bore Ø [mm]: 14.3
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Required quantity: 2
- Drilled: no
- Item number: 615 521 6014/PD
- Manufacturer: MEYLE
- EAN number: 4040074542354
- Condition: New
- Reference number OEM: 0569059
Brake disc with high-grade finish. No degreasing - ready-to-fit solution.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Minimum thickness [mm]: 21
- Weight [kg]: 5,03
- Number of mounting bores: 2
- No. of holes 1: 1
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Item number: 9072061
- Manufacturer: FTE
- EAN number: 3276429796368
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 255,8
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41,1
- Minimum thickness [mm]: 21
- Weight [kg]: 4,45
- Number of mounting bores: 1
- Drilled: no
- Item number: 40 91 7210
- Manufacturer: SWAG
- EAN number: 4044688529107
- Condition: New
- Reference number OEM: 0569059
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Zink flake coated
- Height [mm]: 41,1
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Wheel Bolt Bore Ø [mm]: 14,3
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Required quantity: 2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 615 521 0009/PD
- Manufacturer: MEYLE
- EAN number: 4040074200995
- Condition: New
- Reference number OEM: 0569059
MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
![METZGER 24738 E](https://cdn.autodoc.de/brands/thumbs/94.png?m=0)
- Supplementary Info: AP
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with lock screw set
- Drilled: no
- Item number: 24738 E
- Manufacturer: METZGER
- EAN number: 8020584247389
- Condition: New
- Reference number OEM: 0569059
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Test Mark: 90R-02C0074 / 0122
- Drilled: no
- Item number: BS4813
- Manufacturer: FTE
- EAN number: 4028569346052
- Condition: New
- Reference number OEM: 0569059
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Minimum thickness [mm]: 21
- Net weight [kg]: 4,95
- Drilled: no
- Item number: 203629
- Manufacturer: NK
- EAN number: 5703858180829
- Condition: New
- Reference number OEM: 0569059
![FTE BS4813B](https://cdn.autodoc.de/brands/thumbs/54.png?m=0)
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Test Mark: 90R-02C0277 / 1750
- Drilled: no
- Item number: BS4813B
- Manufacturer: FTE
- EAN number: 4028569472751
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Minimum thickness [mm]: 21
- Net weight [kg]: 5,06
- Drilled: no
- Item number: 313629
- Manufacturer: NK
- EAN number: 5703858739546
- Condition: New
- Reference number OEM: 0569059
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 41,2
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Inner Diameter [mm]: 120,5
- Weight [kg]: 5
- Thread Size: 14,5
- No. of holes 1: 1
- Bore Distance 1 [mm]: 100
- Drilled: no
- Item number: RT 2638
- Manufacturer: ROTINGER
- EAN number: 224676120221341202213
- Condition: New
- Reference number OEM: 0569059
- Item number: 120068120
- Manufacturer: AUTOMEGA
- EAN number: 4053184320743
- Condition: New
- Reference number OEM: 0569059
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Minimum thickness [mm]: 21
- Weight [kg]: 5,035
- Test Mark: ECE-R90
- Drilled: no
- Item number: 9082399
- Manufacturer: FTE
- EAN number: 3276429737590
- Condition: New
- Reference number OEM: 0569059