Actual offers of Wiper motor VW Caddy IV Van (SAA, SAH) ABT e-Caddy 113 hp Electric BOSCH SMG-180.1.3
- Fitting Position: Rear
- Voltage [V]: 12
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Vehicle Equipment: for vehicles with wing doors
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: with integrated washer fluid jet
- Item number: 59696
- Our price: 72,62 €
- Manufacturer: AIC
- EAN number: 4046283596966
- Condition: New
Before installing the wiper arm, connect the wiper motor and Our products are usually delivered without installation instructions. Installation may only be carried out by switch on the ignition so that the motor runs into the park position. trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Info: ORIGINAL Quality
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25
- for PR number: 1ZA
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Ø [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 9,7
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 38,2
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-40086
- Manufacturer: VAICO
- EAN number: 4046001550584
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- for PR number: 1ZE
- Fitting Position: Front Axle
- Diameter [mm]: 288,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0010
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0145.1
- Manufacturer: ATE
- EAN number: 4006633113472
- Condition: New
-
- for PR number: 1ZA
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
-
- for PR number: 1ZA
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0158.1
- Manufacturer: ATE
- EAN number: 4006633312677
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
-
- Fitting Position: Front Axle
- for PR number: 1ZE
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Surface: Painted
- Height [mm]: 49,5
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Machining: High-carbon
- Thread Size: 15,5
- Colour: black
- Test Mark: E190R-02C0176 / 0490
- Drilled: no
- Item number: DF4295
- Manufacturer: TRW
- EAN number: 3322937369713
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Surface: Painted
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Thread Size: 15,4
- Colour: black
- Test Mark: E190R-02 C0176 / 0613
- Supplementary Article / Supplementary Info Info 2: with screw
- Drilled: no
- Item number: DF4464S
- Manufacturer: TRW
- EAN number: 3322937685219
- Condition: New
-
- for PR number: 1ZE
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Material: Grey Cast Iron
- Surface: Uncoated
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 5 / 9
- Wheel Bolt Bore Ø [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144
- Supplementary Article / Supplementary Info Info 2: without screw
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKAD-2027
- Manufacturer: STARK
- EAN number: 4059191001064
- Condition: New
-
- for PR number: 1ZA
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Uncoated
- Height [mm]: 50
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without screw, without ABS sensor ring
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: SKAD-2030
- Manufacturer: STARK
- EAN number: 4059191001095
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Surface: Painted
- Height [mm]: 48,3
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Thread Size: 15,3
- Colour: black
- Test Mark: E190R-02C0190 / 0261
- Drilled: no
- Item number: DF7911
- Manufacturer: TRW
- EAN number: 3322938101459
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Supplementary Info: PRO
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 49,7
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Ø [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 144
- Weight [kg]: 8,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Drilled: no
- Item number: 8DD 355 109-521
- Manufacturer: HELLA
- EAN number: 4082300374186
- Condition: New
-
- for PR number: 1ZE
- Fitting Position: Front Axle
- Product line: PowerDisc
- Diameter [mm]: 288,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1210
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0145.1
- Manufacturer: ATE
- EAN number: 4006633128186
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25
- for PR number: 1ZE
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 144
- Weight [kg]: 7,2
- Bore Ø [mm]: 15,3
- Drilled: no
- Item number: 25830
- Manufacturer: MAPCO
- EAN number: 4043605101709
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Rim Hole Number: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 8,14
- Required quantity: 2
- Brake Disc Hub Height [mm]: 24,7
- Packaging width [cm]: 30
- Packaging height [cm]: 10
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V10-80070
- Manufacturer: VAICO
- EAN number: 4046001323638
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Height [mm]: 49,9
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Weight [kg]: 9,31
- Tightening Torque [Nm]: 120
- Required quantity: 2
- Brake Disc Hub Height [mm]: 24,6
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Fulfils ECE norm: R90
- Drilled: no
- Item number: V10-80085
- Manufacturer: VAICO
- EAN number: 4046001349478
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 272,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 9,7
- Centering Diameter [mm]: 65,0
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 149,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0523
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0356.1
- Manufacturer: ATE
- EAN number: 4006633344531
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48
- Minimum thickness [mm]: 8
- Weight [kg]: 4,11
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 36128
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816361282
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZE
- Quantity Unit: Axle Set
- Supplementary Info: COTEC
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 20,4
- Number of wear indicators [per axle]: 1
- Height [mm]: 64,5
- Width [mm]: 160,2
- Test Mark: E9 90R-02A0112 / 3374
- Manufacturer Restriction: TRW
- Warning Contact Length [mm]: 170
- directional
- Item number: GDB1956
- Our price: 44,03 €
- Manufacturer: TRW
- EAN number: 3322938162238
- Condition: New
- Quantity Unit: Axle Set
- Product line: COTEC
- Fitting Position: Rear Axle
- Thickness [mm]: 16,7
- Height [mm]: 51,9
- Width [mm]: 104,2
- Test Mark: E9 90R-02A0120 / 3778
- Manufacturer Restriction: TRW
- Item number: GDB2042
- Our price: 32,43 €
- Manufacturer: TRW
- EAN number: 3322938221874
- Condition: New