Actual offers of Full gasket set, engine MERCEDES-BENZ C-Class Saloon (W204) C 320 CDI 3.0 224 hp Diesel OM 642.960
- Weight [g]: 60
- Item number: 10 068 9101
- Our price: 21,80 €
- Manufacturer: RMS
- EAN number: G0K1HK
- Condition: New
- TecDoc Engine Number: OM 642.960
- Item number: 50293800
- Our price: 317,28 €
- Manufacturer: AJUSA
- EAN number: 8427769986062
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Brake System: ATE
- Thickness [mm]: 18
- Height [mm]: 54,3
- Width [mm]: 122,8
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: 6864
- Our price: 25,20 €
- Manufacturer: MAPCO
- EAN number: 4043605455680
- Condition: New
-
- Construction Year from: 03 / 2007
- Brake Caliper Type: Aluminium Brake Caliper
- Quantity Unit: Axle Set
- Supplementary Info: Q+, original equipment manufacturer quality
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 18
- Height 1 [mm]: 52,3
- Height 2 [mm]: 54,4
- Width 2 [mm]: 122,5
- Width 1 [mm]: 122,5
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 17,5
- Weight [kg]: 1,061
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 16
- Item number: V30-1445
- Our price: 35,22 €
- Manufacturer: VAICO
- EAN number: 4046001470554
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Weil das alte teile auch von ATE war,des wegen habe mich wieder für gleiche Scheiben entschieden.
weil ich diesen Artikel schon einmal gekauft habe
-
- Construction Year from: 03 / 2007
- Vehicle Equipment: for vehicles with sports package, for vehicles with AMG Sports Package, for vehicles without sports package, for vehicles without AMG sports package
- Fitting Position: Front Axle
- Diameter [mm]: 322,0
- Brake Disc Type: perforated / vented
- Surface: Coated
- Height [mm]: 64,5
- Brake Disc Thickness [mm]: 32,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 30,0
- Inner Diameter [mm]: 154,3
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1129
- Bore Ø [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: yes
- Item number: 24.0132-0100.1
- Manufacturer: ATE
- EAN number: 4006633309660
- Condition: New
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 57,6
- Brake Disc Thickness [mm]: 22
- Construction Year to: 06 / 2009
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Machining: Alloyed / High-carbon
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 411
- Manufacturer: BOSCH
- EAN number: 4047024400252
- Condition: New
Bosch is quality I can rely on.
bosch schon immer
-
- Construction Year to: 06 / 2009
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Material: Low-Metallic
- Thickness [mm]: 16,7
- Height 1 [mm]: 52,4
- Height 2 [mm]: 54,6
- Width [mm]: 122,5
- WVA Number: 24253
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with piston clip
- Item number: 0 986 494 162
- Our price: 28,40 €
- Manufacturer: BOSCH
- EAN number: 4047024343504
- Condition: New
Erstausrüsterqualität
Super Teil kein quitschen nichts top top top gerne wider
-
- Construction Year to: 06 / 2009
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Material: Low-Metallic
- Thickness [mm]: 19
- Height 1 [mm]: 73,6
- Height 2 [mm]: 80,6
- Width [mm]: 188,1
- WVA Number: 24310
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Number of bolts / screws: 4
- Item number: 0 986 494 263
- Our price: 44,62 €
- Manufacturer: BOSCH
- EAN number: 4047024666771
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 80,8
- Width 1 [mm]: 188
- Thickness 1 [mm]: 18,4
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- directional
- Net weight [kg]: 2,8
- Item number: 223367
- Our price: 46,27 €
- Manufacturer: NK
- EAN number: 5703858825522
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info: without accessories
- Height 1 [mm]: 54,3
- Height 2 [mm]: 52,3
- Width 2 [mm]: 122,7
- Width 1 [mm]: 122,7
- Thickness 1 [mm]: 16,6
- Thickness 2 [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Net weight [kg]: 1,19
- Item number: 223368
- Our price: 34,26 €
- Manufacturer: NK
- EAN number: 5703858825539
- Condition: New
Sehr gute Qualität
-
- Construction Year from: 03 / 2007
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Brake System: Lucas / TRW
- Thickness [mm]: 19,0
- Height 1 [mm]: 73,7
- Height 2 [mm]: 80,8
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Number of bolts / screws: 4
- Observe dimensions
- Spring clamp diameter [mm]: 46
- Item number: 6861
- Our price: 28,86 €
- Manufacturer: MAPCO
- EAN number: 4043605455666
- Condition: New
Beste bremsbeläge
weil ich diesen Artikel schon einmal gekauft habe.
-
- Construction Year from: 03 / 2007
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 19,0
- Height 1 [mm]: 73,7
- Height 2 [mm]: 80,8
- Width [mm]: 188,0
- Test Mark: E1 90R-02A0334 / 0328
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Number of bolts / screws: 4
- Observe dimensions
- Spring clamp diameter [mm]: 46
- Item number: 13.0460-2734.2
- Our price: 68,18 €
- Manufacturer: ATE
- EAN number: 4006633325875
- Condition: New
Preisleistung sehr gut.
renommierter Hersteller
-
- Construction Year from: 03 / 2007
- Brake Caliper Type: Aluminium Brake Caliper
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Height 1 [mm]: 52,3
- Height 2 [mm]: 54,4
- Width 2 [mm]: 122,5
- Width 1 [mm]: 122,5
- Thickness 1 [mm]: 17,8
- Thickness 2 [mm]: 18,0
- Test Mark: E1 90R-02A0525 / 0524
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Observe dimensions
- Item number: 13.0460-7244.2
- Our price: 45,39 €
- Manufacturer: ATE
- EAN number: 4006633325844
- Condition: New
guter hersteller
-
- Construction Year from: 03 / 2007
- Brake Caliper Type: Cast iron brake caliper
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 18,0
- Height 1 [mm]: 52,3
- Height 2 [mm]: 54,4
- Width 2 [mm]: 122,5
- Width 1 [mm]: 122,5
- Test Mark: E1 90R-02A0525 / 0524
- MAPP code available
- Item number: 13.0460-7257.2
- Our price: 50,27 €
- Manufacturer: ATE
- EAN number: 4006633325851
- Condition: New
Gute Erfahrung mit ATE habe. einfach toll
ATE verwende ich seit den 70er Jahren immer gut!
-
- Construction Year from: 03 / 2007
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 19,0
- Height [mm]: 80,8
- Width [mm]: 188,0
- Test Mark: E1 90R-02A0258 / 0327
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Number of bolts / screws: 4
- Observe dimensions
- Spring clamp diameter [mm]: 46
- Item number: 13.0470-2734.2
- Our price: 88,65 €
- Manufacturer: ATE
- EAN number: 4006633346320
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
passt und Funktioniert. Super Qualität
Danke gute Arbeit
-
- Construction Year from: 03 / 2007
- Brake Caliper Type: Aluminium Brake Caliper
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Height 1 [mm]: 52,3
- Height 2 [mm]: 54,4
- Width 2 [mm]: 122,5
- Width 1 [mm]: 122,5
- Thickness 1 [mm]: 17,8
- Thickness 2 [mm]: 18,0
- Test Mark: E1 90R-02A0258 / 0326
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Observe dimensions
- Item number: 13.0470-7244.2
- Our price: 71,21 €
- Manufacturer: ATE
- EAN number: 4006633347143
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
mir die Marke und Qualität wichtig war
Ceramik Beläge sind unschlagbar gut!!
-
- Construction Year from: 03 / 2007
- Brake Caliper Type: Cast iron brake caliper
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 18,0
- Height 1 [mm]: 52,3
- Height 2 [mm]: 54,4
- Width 2 [mm]: 122,5
- Width 1 [mm]: 122,5
- Test Mark: E1 90R-02A0258 / 0326
- MAPP code available
- Item number: 13.0470-7257.2
- Our price: 65,12 €
- Manufacturer: ATE
- EAN number: 4006633347174
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Aus Erfahrung gut…
-
- Construction Year from: 03 / 2007
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 57,5
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 164,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296 / 0785
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0208.1
- Manufacturer: ATE
- EAN number: 4006633314688
- Condition: New
ATE meiner Meinung die besten sind
Benutze seit jahren ate nie probleme
-
- Construction Year from: 03 / 2007
- Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package
- Fitting Position: Front Axle
- Diameter [mm]: 322,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 64,5
- Brake Disc Thickness [mm]: 32,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 29,4
- Inner Diameter [mm]: 154,3
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0259
- Bore Ø [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0132-0101.1
- Manufacturer: ATE
- EAN number: 4006633310277
- Condition: New
einfach super bin ultra zufrieden
Top Qualität zum fairen Preis
-
- Construction Year to: 06 / 2009
- Fitting Position: Front Axle
- Diameter [mm]: 322
- Brake Disc Type: Perforated, Vented
- Surface: Coated
- Height [mm]: 64,5
- Brake Disc Thickness [mm]: 32
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,3
- Drilled: yes
- Item number: 0 986 479 408
- Manufacturer: BOSCH
- EAN number: 4047024400214
- Condition: New