Actual offers of Exhaust pipes PORSCHE 911 Coupe (997) 3.8 Carrera 4S 355 hp Petrol M 97.01
- Fitting Position: Rear
- Exhaust System: for rear muffler
- Material: Stainless Steel
- Surface: Blank
- Quantity Unit: Kit
- Item number: 1620705310
- Our price: 379,96 €
- Manufacturer: JP GROUP
- EAN number: 5710412434427
- Condition: New
- Fitting Position: Rear
- Exhaust System: for rear muffler
- Trim Level: S look
- Material: Stainless Steel
- Surface: Blank
- Quantity Unit: Kit
- Item number: 1620701810
- Our price: 520,96 €
- Manufacturer: JP GROUP
- EAN number: 5710412191702
- Condition: New
- TecDoc Engine Number: M 97.01
- Item number: 7.22151.52.0
- Our price: 114,51 €
- Manufacturer: PIERBURG
- EAN number: 4028977920509
- Condition: New
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without ceramic brakes
- Quantity Unit: Axle Set
- Supplementary Info: Q+, original equipment manufacturer quality
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact, prepared for wear indicator
- Brake System: BREMBO
- Thickness [mm]: 17
- Height [mm]: 86
- Width [mm]: 121,0
- Weight [kg]: 2,073
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V45-0022
- Our price: 91,16 €
- Manufacturer: VAICO
- EAN number: 4046001470516
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: Original VAICO Quality
- Diameter [mm]: 299
- Brake Disc Type: perforated / vented
- Height [mm]: 75
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 98
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 22
- Brake Disc Hub Height [mm]: 51
- Packaging width [cm]: 30
- Packaging height [cm]: 15
- Packaging Depth [cm]: 30
- Drilled: yes
- Item number: V45-80002
- Manufacturer: VAICO
- EAN number: 4046001552151
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Rear Axle Right
- Braking System: for vehicles without ceramic brakes
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Surface: Coated
- Height [mm]: 75,0
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- paired article number: 24.0128-0197.1
- Bore Ø [mm]: 15,4
- Drilled: yes
- Item number: 24.0128-0196.1
- Manufacturer: ATE
- EAN number: 4006633302074
- Condition: New
price incl. 19% VAT
excl. delivery costs
Ich kaufe nur ATE Bremsen Produckte .
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Front Axle Left
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Surface: Coated
- Height [mm]: 69,5
- Brake Disc Thickness [mm]: 34,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 32,0
- Inner Diameter [mm]: 173,5
- Machining: Alloyed / High-carbon
- MAPP code available
- paired article number: 24.0134-0102.1
- Bore Ø [mm]: 15,4
- Drilled: yes
- Item number: 24.0134-0101.1
- Manufacturer: ATE
- EAN number: 4006633301817
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Product line: PREMIER
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Brembo
- Thickness [mm]: 16,2
- Number of wear indicators [per axle]: 2
- Height [mm]: 78
- Width [mm]: 114
- WVA Number: 21937
- Test Mark: R90 Homologated
- Weight [kg]: 1,81
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 16,764
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,826
- Item number: FDB1307
- Our price: 47,66 €
- Manufacturer: FERODO
- EAN number: 5016687156676
- Condition: New
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Brembo
- Thickness [mm]: 17
- Height [mm]: 90,3
- Width [mm]: 121,3
- WVA Number: 23329
- Test Mark: R90 Homologated
- Weight [kg]: 2,14
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 20,32
- Packaging width [cm]: 12,446
- Packaging height [cm]: 7,874
- Item number: FDB1742
- Our price: 54,30 €
- Manufacturer: FERODO
- EAN number: 5016687350579
- Condition: New
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Brembo
- Thickness [mm]: 16,5
- Height [mm]: 89
- Width [mm]: 140,2
- WVA Number: 23139
- Test Mark: R90 Homologated
- Weight [kg]: 2,597
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 20,6
- Packaging width [cm]: 12,4
- Packaging height [cm]: 7,8
- Item number: FDB1998
- Our price: 69,14 €
- Manufacturer: FERODO
- EAN number: 4044197396580
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Brembo
- Thickness [mm]: 17
- Height [mm]: 89
- Width [mm]: 140
- WVA Number: 23139
- Item number: P 65 011
- Our price: 61,62 €
- Manufacturer: BREMBO
- EAN number: 8020584061824
- Condition: New
Attention: without counterweight, because OE changed.
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without ceramic brakes
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories, with counterweights
- Brake System: Brembo
- Thickness [mm]: 17
- Height [mm]: 86
- Width [mm]: 121
- WVA Number: 24049
- Item number: P 65 014
- Our price: 65,61 €
- Manufacturer: BREMBO
- EAN number: 8020584061855
- Condition: New
-
- Fitting Position: Front Axle Left
- Braking System: for vehicles without ceramic brakes
- Product line: COAT Z
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Surface: Coated
- Height [mm]: 70
- Brake Disc Thickness [mm]: 34
- Centering Diameter [mm]: 98
- Rim Hole Number: 5
- Hole Arrangement / Number: 7 / 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 32
- Weight [kg]: 10,5
- Test Mark: ECE R90 APPROVED
- paired article number: 460.1561.20
- directional
- Drilled: yes
- Item number: 460.1560.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719717
- Condition: New
-
- Construction Year from: 10 / 2005
- Construction Year to: 05 / 2008
- Fitting Position: Front Axle Left
- Braking System: not for carbon-ceramic brake discs
- Diameter [mm]: 329,5
- Brake Disc Type: Perforated, Vented
- Surface: Coated
- Height [mm]: 69,4
- Brake Disc Thickness [mm]: 34
- Centering Diameter [mm]: 98
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 32
- Machining: Alloyed / High-carbon
- paired article number: 0 986 479 580
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,4
- Drilled: yes
- Item number: 0 986 479 579
- Manufacturer: BOSCH
- EAN number: 4047024683716
- Condition: New
-
- Construction Year from: 10 / 2005
- Construction Year to: 05 / 2008
- Fitting Position: Rear Axle Left
- Braking System: not for carbon-ceramic brake discs
- Diameter [mm]: 329,7
- Brake Disc Type: Perforated, Vented
- Surface: Coated
- Height [mm]: 74,9
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 98
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 26
- Machining: Alloyed / High-carbon
- paired article number: 0 986 479 582
- Drill Diameter, up to [mm]: 15,4
- Drilled: yes
- Item number: 0 986 479 581
- Manufacturer: BOSCH
- EAN number: 4047024683730
- Condition: New
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Brembo
- Thickness [mm]: 17,0
- Height [mm]: 86,0
- Width [mm]: 121,0
- Test Mark: E1 90R-011216 / 1048
- MAPP code available
- Article number of recommended accessories: 24.8190-0024.2, 24.8190-0025.2, 24.8190-0938.2, 24.8190-0943.2
- Observe dimensions
- Item number: 13.0460-4842.2
- Our price: 85,59 €
- Manufacturer: ATE
- EAN number: 4006633320269
- Condition: New
Ich kaufe nur ATE Brems Produckte.
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Brembo
- Thickness [mm]: 17,0
- Height [mm]: 88,5
- Width [mm]: 140,0
- Test Mark: E1 90R-01937 / 793
- MAPP code available
- Article number of recommended accessories: 24.8190-0921.2, 24.8190-0931.2, 24.8190-0933.2, 24.8190-0950.2
- Observe dimensions
- Item number: 13.0460-4999.2
- Our price: 85,60 €
- Manufacturer: ATE
- EAN number: 4006633219242
- Condition: New
-
- Fitting Position: Rear Axle Left
- Braking System: for vehicles without ceramic brakes
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Surface: Coated
- Height [mm]: 75,0
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- paired article number: 24.0128-0196.1
- Bore Ø [mm]: 15,4
- Drilled: yes
- Item number: 24.0128-0197.1
- Manufacturer: ATE
- EAN number: 4006633302135
- Condition: New
price incl. 19% VAT
excl. delivery costs
Weil ich nur ATE bei Bremsen kaufe . noch nie Probleme damit
-
- Braking System: for vehicles without ceramic brakes
- Fitting Position: Front Axle Right
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Surface: Coated
- Height [mm]: 69,5
- Brake Disc Thickness [mm]: 34,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 32,0
- Inner Diameter [mm]: 173,5
- Machining: Alloyed / High-carbon
- MAPP code available
- paired article number: 24.0134-0101.1
- Bore Ø [mm]: 15,4
- Drilled: yes
- Item number: 24.0134-0102.1
- Manufacturer: ATE
- EAN number: 4006633301879
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Brake System: Brembo
- Thickness [mm]: 17
- Height [mm]: 88,5
- Width [mm]: 140
- WVA Number: 23139
- Weight [kg]: 2,445
- Technical Information Number: 23139 170 0 4
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8,3
- Item number: 2313901
- Our price: 80,48 €
- Manufacturer: TEXTAR
- EAN number: 4019722200595
- Condition: New