Actual offers of Receiver drier OPEL Vectra C Saloon (Z02) 2.8 V6 Turbo OPC 280 hp Petrol Z 28 NET
- Inlet Ø [mm]: 8,5
- Outlet Ø [mm]: 8,6
- Diameter [mm]: 60
- Height [mm]: 157
- Item number: 037-021-0009
- Our price: 22,78 €
- Manufacturer: ABAKUS
- EAN number: 0370210009
- Condition: New
The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale.
Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops.
Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list).
Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system.
Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Diameter [mm]: 60
- Height [mm]: 155
- Item number: KTT120099
- Our price: 24,02 €
- Manufacturer: THERMOTEC
- EAN number: 5901655092103
- Condition: New
-
- Fitting Position: Front Axle
- not for trim level: OPC
- Quantity Unit: Axle Set
- Material: Low-Metallic
- Height 1 [mm]: 72,7
- Height 2 [mm]: 77,5
- Width 2 [mm]: 156,5
- Width 1 [mm]: 155,3
- Thickness 1 [mm]: 19,8
- Thickness 2 [mm]: 20,4
- WVA Number: 23404
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Item number: 0 986 494 280
- Our price: 48,51 €
- Manufacturer: BOSCH
- EAN number: 3165143684535
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 18,8
- Height 1 [mm]: 72,9
- Height 2 [mm]: 72,9
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 0708
- MAPP code available
- Item number: 13.0460-7204.2
- Our price: 51,60 €
- Manufacturer: ATE
- EAN number: 4006633188449
- Condition: New
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 4463
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7194.2
- Our price: 44,98 €
- Manufacturer: ATE
- EAN number: 4006633374385
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: TEVES
- Thickness [mm]: 16,4
- Height [mm]: 51,9
- Width [mm]: 123
- WVA Number: 24137, 24136, 23482
- Test Mark: ECE-R90
- Weight [kg]: 1,015
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: 598783
- Our price: 31,83 €
- Manufacturer: VALEO
- EAN number: 3276425987838
- Condition: New
1923-2023: 100 years of braking
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: TEVES
- Thickness [mm]: 18,5
- Height [mm]: 73
- Height 2 [mm]: 73
- Width [mm]: 155
- Width 2 [mm]: 156
- Thickness 2 [mm]: 18,5
- WVA Number: 23762, 23801
- Test Mark: ECE-R90
- Weight [kg]: 2,07
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Item number: 598822
- Our price: 46,18 €
- Manufacturer: VALEO
- EAN number: 3276425988224
- Condition: New
1923-2023: 100 years of braking
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 14,3
- Drilled: no
- Item number: 0 986 479 142
- Manufacturer: BOSCH
- EAN number: 4047024202047
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: internally vented
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 7
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: O1016V
- Manufacturer: LPR
- EAN number: 8032928003032
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 35,46 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 37,54 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Rear Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7195.2
- Our price: 55,89 €
- Manufacturer: ATE
- EAN number: 4006633347020
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 18,8
- Height 1 [mm]: 72,9
- Height 2 [mm]: 72,9
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1242 / 0708
- MAPP code available
- Item number: 13.0470-7204.2
- Our price: 66,31 €
- Manufacturer: ATE
- EAN number: 4006633347051
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0532
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0157.1
- Manufacturer: ATE
- EAN number: 4006633105828
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0173.1
- Manufacturer: ATE
- EAN number: 4006633105842
- Condition: New
-
- Vehicle Identification Number (VIN) from: 61000001
- Fitting Position: Front Axle
- Diameter [mm]: 345,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 45,3
- Brake Disc Thickness [mm]: 29,9
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 27,5
- Inner Diameter [mm]: 142,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0766
- Bore Ø [mm]: 14,2
- Drilled: no
- Item number: 24.0130-0189.1
- Manufacturer: ATE
- EAN number: 4006633303125
- Condition: New
- Product line: PowerDisc
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0312-0157.1
- Manufacturer: ATE
- EAN number: 4006633147491
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Product line: PowerDisc
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0320-0173.1
- Manufacturer: ATE
- EAN number: 4006633147538
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 14,3
- Drilled: no
- Item number: 0 986 479 106
- Manufacturer: BOSCH
- EAN number: 4047024093560
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 45,2
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 70
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 25
- Machining: High-carbon
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 14,3
- Drilled: no
- Item number: 0 986 479 143
- Manufacturer: BOSCH
- EAN number: 4047023149404
- Condition: New