Actual offers of Receiver drier MERCEDES-BENZ Sprinter 5-T Platform/Chassis (W906) 515 CDI 150 hp Diesel OM 651.957
- Diameter [mm]: 40
- Supplementary Article / Supplementary Info Info 2: without pressure switch
- Packaging height [cm]: 5,30
- Packaging width [cm]: 5,30
- Packaging length [cm]: 38,5
- Outer Length [mm]: 298
- Supplementary Article / Supplementary Info: without gasket / seal
- Net Weight [g]: 231
- Item number: AD 16 000S
- Our price: 23,93 €
- Manufacturer: MAHLE ORIGINAL
- EAN number: 4057635040990
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Supplementary Info: Original VEMO Quality
- Packaging height [cm]: 10,4
- Packaging width [cm]: 38,2
- Weight [kg]: 0,278
- Packaging Depth [cm]: 9,5
- Item number: V30-06-0067
- Our price: 25,85 €
- Manufacturer: VEMO
- EAN number: 4046001502729
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Inlet Ø [mm]: 11,1
- Outlet Ø [mm]: 11,1
- Diameter [mm]: 40
- Height [mm]: 295
- Item number: KTT120063
- Our price: 17,48 €
- Manufacturer: THERMOTEC
- EAN number: 5901655086607
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Brembo
- Thickness [mm]: 21,0
- Height [mm]: 73,4
- Width [mm]: 169,1
- Test Mark: E1 90R-02A0465 / 0563
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0424.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-4827.2
- Our price: 76,62 €
- Manufacturer: ATE
- EAN number: 4006633336154
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 68,5
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 85,0
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 25,0
- Inner Diameter [mm]: 155,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0047
- Bore Ø [mm]: 15,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0128-0203.1
- Manufacturer: ATE
- EAN number: 4006633307956
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Material: Low-Metallic
- Thickness [mm]: 20,7
- Height [mm]: 73,4, 73,5
- Width [mm]: 169,1
- WVA Number: 29200
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with bolts / screws
- Item number: 0 986 494 194
- Our price: 46,22 €
- Manufacturer: BOSCH
- EAN number: 4047024482739
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with full brake discs on the rear axle
- Brake Disc Type: solid
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Bosch
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 2
- Height [mm]: 63
- Width [mm]: 137
- WVA Number: 29190
- Weight [kg]: 1,5
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: 98033800
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2919001
- Our price: 53,38 €
- Manufacturer: TEXTAR
- EAN number: 4019722283277
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Height [mm]: 93
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 120
- Hole Arrangement / Number: 06 / 06
- Wheel Bolt Bore Ø [mm]: 15
- Bolt Hole Circle Ø [mm]: 145
- Minimum thickness [mm]: 25
- Inner Diameter [mm]: 172
- Weight [kg]: 10
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Drilled: no
- Item number: 93143400
- Manufacturer: TEXTAR
- EAN number: 4019722275104
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Trim Level: Vented disc
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Height [mm]: 93
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 120
- Number of Holes: 6
- Minimum thickness [mm]: 25
- Tightening Torque [Nm]: 175
- Machining: High-carbon
- Drilled: no
- Item number: 09.9510.14
- Manufacturer: BREMBO
- EAN number: 8020584951019
- Condition: New
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Brembo
- Thickness [mm]: 21
- Height [mm]: 74
- Width [mm]: 169
- WVA Number: 29200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Item number: P 50 059
- Our price: 35,15 €
- Manufacturer: BREMBO
- EAN number: 8020584059555
- Condition: New
-
- Fitting Position: Rear Axle
- Axle Code: 741.412
- Brake Disc Type: solid
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Bosch
- Thickness [mm]: 19
- Number of wear indicators [per axle]: 2
- Height [mm]: 63
- Width [mm]: 137
- WVA Number: 29190
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 99
- Item number: P 50 084
- Our price: 36,78 €
- Manufacturer: BREMBO
- EAN number: 8020584061237
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Bosch
- Thickness [mm]: 20,5
- Height [mm]: 78,2
- Width [mm]: 164,8
- Test Mark: E1 90R-011115 / 1027
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3842.2
- Our price: 50,99 €
- Manufacturer: ATE
- EAN number: 4006633320153
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 303,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 93,0
- Brake Disc Thickness [mm]: 28,0
- Centering Diameter [mm]: 120,0
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 145,0
- Minimum thickness [mm]: 25,0
- Inner Diameter [mm]: 172,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 1048
- Bore Ø [mm]: 15,0
- Drilled: no
- Item number: 24.0128-0202.1
- Manufacturer: ATE
- EAN number: 4006633307949
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: Vented, internally vented
- Surface: Coated
- Height [mm]: 93
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 120
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 145
- Minimum thickness [mm]: 25
- Machining: High-carbon
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15
- Drilled: no
- Item number: 0 986 479 296
- Manufacturer: BOSCH
- EAN number: 4047024233669
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for SA code: RS3
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Height [mm]: 68,4
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 85
- Hole Arrangement / Number: 06 / 07
- Wheel Bolt Bore Ø [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 25
- Inner Diameter [mm]: 155
- Weight [kg]: 9,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Item number: 93143200
- Manufacturer: TEXTAR
- EAN number: 4019722275081
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Height [mm]: 69
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 85
- Number of Holes: 6
- Minimum thickness [mm]: 25
- Tightening Torque [Nm]: 175
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.9508.14
- Manufacturer: BREMBO
- EAN number: 8020584950814
- Condition: New
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake Disc Type: Vented
- not for axle code: 741.412
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Bosch
- Thickness [mm]: 21
- Height [mm]: 79
- Width [mm]: 165
- WVA Number: 29217
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Item number: P 50 060
- Our price: 29,50 €
- Manufacturer: BREMBO
- EAN number: 8020584059562
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Length [mm]: 165
- Width [mm]: 78,1
- Thickness 1 [mm]: 20,5
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,589
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Item number: 16709
- Our price: 32,09 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167099
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Length [mm]: 136,9
- Width [mm]: 63,1
- Thickness 1 [mm]: 19,8
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,60
- Supplementary Article / Supplementary Info Info 2: with screw set
- Item number: 16735
- Our price: 34,14 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167358
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Length [mm]: 169,2
- Width [mm]: 73,1
- Thickness 1 [mm]: 20,3
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,770
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Item number: 16753
- Our price: 40,24 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167532
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs