Actual offers of Coolant water preheating VW Bora Saloon (1J2) 1.9 SDI 68 hp Diesel AQM
- Overall Length [mm]: 75,5
- Thread Size: M12x1.25
- Voltage [V]: 11
- Spanner Size: 12
- Glow Plug Design: Metal glow plug
- Required quantity: 3
- Connector type: Pin
- Tightening torque to [Nm]: 20
- Tightening torque from [Nm]: 15
- Cone Pitch: 63
- Weight [g]: 26
- for OE number: N10302101; N10302102
- Version: Double coil
- Item number: DG-628
- Manufacturer: DENSO
- EAN number: 8717613053935
- Condition: New
- Connector type: Ø 4mm
- Spanner Size: 12mm
- Voltage [V]: 12
- Current Strength [A]: 14
- Glow Plug Design: after-glow capable
- Thread Size: M15x1,25
- Length [mm]: 72,5
- Fitting Depth [mm]: 21
- Cone Pitch: 63
- Diameter [mm]: 6
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug)
- Item number: 26056
- Our price: 10,18 €
- Manufacturer: BREMI
- EAN number: 4017534180234
- Condition: New
- Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug)
- Voltage [V]: 12
- Thread Size: M12x1,25
- Fitting Depth [mm]: 72
- Spanner Size: 12
- Cone Pitch: 63
- Terminal Type: Pin
- Item number: H1 458
- Our price: 13,40 €
- Manufacturer: HIDRIA
- EAN number: 326672
- Condition: New
- Product line: Original Quality
- Thread Size: M12 x 1,25
- Voltage [V]: 12
- Rated Voltage [V]: 11
- Glow Plug Design: Pencil-type Glow Plug
- Weight [kg]: 0,028
- Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug)
- Packaging width [cm]: 9,6
- Packaging height [cm]: 2
- Packaging Depth [cm]: 2
- Item number: V99-14-0021
- Manufacturer: VEMO
- EAN number: 4046001361562
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Alles in Ordnung
gute Erfahrung mitBREMBO
- Product line: COATED DISC LINE
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.7165.11
- Manufacturer: BREMBO
- EAN number: 8020584018132
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,2
- Production Number: 6010092
- Item number: 6010092
- Our price: 15,48 €
- Manufacturer: KRAFT
- EAN number: 5900427194281
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Height [mm]: 34,2
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC4735
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583825
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Height [mm]: 36,6
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: BDC4668
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583887
- Condition: New
Kaufe nur ATE Bremsen
Erstausrüster Qualität für wenig Geld
-
- Construction Year to: 12 / 2004
- for PR number: 1KE, 1KP, 1KT
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 29,02 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
Marken Qualität
Weill ich schon seit 15 Jahren nur ATE Ceramic Bremsbeläge und Scheiben fahre und bis heute immer zufrieden bin.
-
- Construction Year to: 12 / 2004
- for PR number: 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 15,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0220, E9 90R-02A1163 / 1123
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0419.2, 13.0460-0516.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2937.2
- Our price: 22,45 €
- Manufacturer: ATE
- EAN number: 4006633092982
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LS, 1ZM, 1ZP
- for article number: LP1514
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 36,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Machining: Untreated
- Test Mark: E1 90R-02C0300 / 2268
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3036
- Manufacturer: DELPHI
- EAN number: 5012759062746
- Condition: New
-
- Vehicle Identification Number (VIN) to: 1J-X-400000
- Fitting Position: Front Axle
- for PR number: 1LQ
- Diameter [mm]: 256
- Brake System: ATE
- Brake Disc Type: internally vented
- Height [mm]: 36,8
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1461V
- Manufacturer: LPR
- EAN number: 8032532068687
- Condition: New
Super und top Leistung
-
- Construction Year to: 12 / 2004
- Vehicle Identification Number (VIN) from: 1J-X-400001
- Fitting Position: Front Axle
- for PR number: 1LR, 1LS, 1ZM, 1ZP
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Height [mm]: 36,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1471V
- Manufacturer: LPR
- EAN number: 8032532068694
- Condition: New
-
- Construction Year to: 12 / 2004
- Fitting Position: Rear Axle
- for PR number: 1KU, 1KY, 2EE
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Height [mm]: 37
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1602V
- Manufacturer: LPR
- EAN number: 8032532068830
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Brake System: Kelsey-Hayes
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 19,6
- Production Number: 6000385
- Item number: 6000385
- Our price: 22,61 €
- Manufacturer: KRAFT
- EAN number: 5900427187184
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Drilled: no
- Item number: BDC4753
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583863
- Condition: New
-
- Construction Year to: 12 / 2004
- for PR number: 1KU, 1KY, 2EE
- Fitting Position: Rear Axle
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Height [mm]: 36,6
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Bore Ø [mm]: 15,8
- Drilled: no
- Item number: BAR22163
- Manufacturer: Barum
- EAN number: 4006633331265
- Condition: New
diese Marke gute Qualität hat.
wel ATE Erstausrüszer ist.
-
- Construction Year to: 12 / 2004
- for PR number: 1KU, 2EE
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 26,12 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
Guter Preis. super Qualität
es mit ATE keine Schwierigkeiten gibt
-
- Construction Year to: 12 / 2004
- for PR number: 1KY
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 16,0
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0220
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0516.2
- Number of bolts / screws: 4
- Item number: 13.0460-2886.2
- Our price: 26,70 €
- Manufacturer: ATE
- EAN number: 4006633201421
- Condition: New
ATE Bremsbeläge kaufe ich vor allem für meinen BMW da sie Erstausrüster sind.
Die Firma das beste an Preis und Leistung ist.
-
- Vehicle Identification Number (VIN) to: 1J-X-800000
- for PR number: 1LR, 1LS, 1LQ, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: Volkswagen
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- MAPP code available
- Item number: 13.0460-7111.2
- Our price: 42,93 €
- Manufacturer: ATE
- EAN number: 4006633302050
- Condition: New