Actual offers of Clutch plate OPEL Vectra C Saloon (Z02) 1.9 CDTI 150 hp Diesel Z 19 DTH
- Hub Profile: 23x26-23
- Diameter [mm]: 240
- Number of Teeth: 23
- Parameter: 240D
- only in connection with: 883082 ...
- Clutch Type: Rigid clutch disc with organic surfaces
- Product line: Performance
- Item number: 881864 000904
- Our price: 386,58 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451005020
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
- Hub Profile: 23x26-23
- Diameter [mm]: 240
- Number of Teeth: 23
- Parameter: 240C
- only in connection with: 883082 ...
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 000905
- Our price: 426,69 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451005013
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.
-
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 292
- Brake Disc Type: internally vented
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 7
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: O1016V
- Manufacturer: LPR
- EAN number: 8032928003032
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Brake System: Ate-Teves
- Height [mm]: 69,3
- Width [mm]: 155,1
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,1
- Production Number: 6001720
- Item number: 6001720
- Our price: 21,21 €
- Manufacturer: KRAFT
- EAN number: 5900427191037
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Height [mm]: 51,9
- Width [mm]: 123,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 15,8
- Production Number: 6015105
- Item number: 6015105
- Our price: 20,07 €
- Manufacturer: KRAFT
- EAN number: 5900427194465
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 285
- Brake Disc Type: Vented
- Height [mm]: 42
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5412
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840744
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 302
- Brake Disc Type: Vented
- Height [mm]: 45
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: BDC5421
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114324
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: BDC5422
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114270
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 46,55 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
Weniger Bremsstaub anfällt.
-
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 4463
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7194.2
- Our price: 44,98 €
- Manufacturer: ATE
- EAN number: 4006633374385
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
Die Qualität ist ausgezeichnet. Sie bremsen sehr gut. Erfordert wenig Aufwärmen.
Bei allen Fahrzeugen benutze ich diese wegen dem verringerten bremsstaub und der sehr guten bremsleistung
-
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0470-7195.2
- Our price: 55,38 €
- Manufacturer: ATE
- EAN number: 4006633347020
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
habe gute Erfahrungen
Passgenau und gute Qualität
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 19,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0173.1
- Manufacturer: ATE
- EAN number: 4006633105842
- Condition: New
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 302,3
- Brake Disc Type: internally vented
- Height [mm]: 45,2
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 25
- Drilled: no
- Item number: O1002V
- Manufacturer: LPR
- EAN number: 8032532099063
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 278
- Brake Disc Type: solid
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: O1014P
- Manufacturer: LPR
- EAN number: 8032928001694
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Height [mm]: 41,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Drilled: no
- Item number: BDC5413
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840751
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
Gute Erfahrungen mit ATE
ich nur gute Erfahrungen mit ATE bis heute gemacht habe.
-
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 35,13 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
ich gute Erfahrungen mit ATE gemacht habe.
ATE sind top Bremsen
-
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 16,6
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 37,43 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
gute erfahrung mit dieser Marke
-
- Brake Caliper Type: for brake calipers with steel pistons
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Item number: 13.0460-7212.2
- Our price: 46,70 €
- Manufacturer: ATE
- EAN number: 4006633274289
- Condition: New
-
- Brake Caliper Type: for brake caliper with plastic piston
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,1
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1242 / 4466
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0470-7172.2
- Our price: 62,20 €
- Manufacturer: ATE
- EAN number: 4006633374835
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 41,4
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0532
- Bore Ø [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0112-0157.1
- Manufacturer: ATE
- EAN number: 4006633105828
- Condition: New