Actual offers of Breather hose, fuel tank VW Golf IV Variant (1J5) 1.6 16V 105 hp Petrol BCB
- Vehicle Equipment: for vehicles with charcoal canister
- Material: Plastic
- Hose Length [mm]: 345
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Seal Material: NBR (nitrile butadiene rubber)
- Item number: 119 281
- Our price: 12,09 €
- Manufacturer: TOPRAN
- EAN number: 1406930000018
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
![V10-9431 Breather hose, fuel tank Volkswagen GOLF 1.6 16V 105 hp 77 kW AUS 2001 1J5](https://cdn.autodoc.de/brands/thumbs/199.png?m=0)
- Vehicle Equipment: for vehicles with charcoal canister
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Item number: V10-9431
- Our price: 14,37 €
- Manufacturer: VAICO
- EAN number: 4062375492909
- Condition: New
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Vehicle Equipment: for vehicles with charcoal canister
- Item number: 74019
- Our price: 20,89 €
- Manufacturer: AIC
- EAN number: 4046283740192
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Alles in Ordnung
gute Erfahrung mitBREMBO
- Product line: COATED DISC LINE
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.7165.11
- Manufacturer: BREMBO
- EAN number: 8020584018132
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LR, 1LS, 1ZM, 1ZP
- for article number: LP1514
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 36,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Machining: Untreated
- Test Mark: E1 90R-02C0300 / 2268
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3036
- Manufacturer: DELPHI
- EAN number: 5012759062746
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KP, 1KT, 1KX
- Diameter [mm]: 230
- Brake Disc Type: solid
- Height [mm]: 40
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Drilled: no
- Item number: A1441P
- Manufacturer: LPR
- EAN number: 8032532068663
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,2
- Production Number: 6010092
- Item number: 6010092
- Our price: 12,91 €
- Manufacturer: KRAFT
- EAN number: 5900427194281
- Condition: New
1zu1 Verschleißteilaustausch
Ich diese seit Jahren verwende
-
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Brake System: Volkswagen
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- Warning Contact Length [mm]: 145
- MAPP code available
- Item number: 13.0460-7117.2
- Our price: 42,89 €
- Manufacturer: ATE
- EAN number: 4006633071215
- Condition: New
Qualität. Verbaue ATE seit 40 Jahren.
Immer gute Erfahrung gemacht
-
- for PR number: 1KE, 1KP, 1KT
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2894.2
- Our price: 44,09 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Nur posives erfahren
Weil ATE Ceramic Bremsbeläge sehr gut sind!
-
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: incl. wear warning contact
- Brake System: Volkswagen
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0258 / 0212
- Warning Contact Length [mm]: 145
- MAPP code available
- Item number: 13.0470-7117.2
- Our price: 60,86 €
- Manufacturer: ATE
- EAN number: 4006633339933
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Top Produkt! Hervorragende und hochwertige Bremsscheiben mit verstärkten Bremselementen. Eine sehr gute Alternative zu Bremsscheiben mit Perforation. Viel besser als herkömmliche Bremsscheiben. Der Verschleiß ist ebenfalls gut (ausreichend für eine lange Laufleistung).
Qualität. Verbaue ATE seit 40 Jahren.
-
- for PR number: 1KP, 1KT
- Fitting Position: Rear Axle
- Product line: PowerDisc
- Diameter [mm]: 230,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40,6
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1293
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0309-0123.1
- Manufacturer: ATE
- EAN number: 4006633204705
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
-
- Fitting Position: Front Axle
- for PR number: 1LE, 1LN, 1ZE, 1ZH
- Diameter [mm]: 288
- Brake System: TRW
- Brake Disc Type: internally vented
- Height [mm]: 34,2
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1451V
- Manufacturer: LPR
- EAN number: 8032532068670
- Condition: New
-
- Construction Year to: 10 / 2003
- Fitting Position: Front Axle
- for PR number: 1LQ, 1ZF
- Diameter [mm]: 256
- Brake System: ATE
- Brake Disc Type: internally vented
- Height [mm]: 36,8
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1461V
- Manufacturer: LPR
- EAN number: 8032532068687
- Condition: New
Super und top Leistung
-
- Fitting Position: Front Axle
- for PR number: 1LR, 1LS, 1ZF, 1ZM, 1ZP
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Height [mm]: 36,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: A1471V
- Manufacturer: LPR
- EAN number: 8032532068694
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Brake System: Kelsey-Hayes
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 19,6
- Production Number: 6000385
- Item number: 6000385
- Our price: 18,87 €
- Manufacturer: KRAFT
- EAN number: 5900427187184
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Drilled: no
- Item number: BDC4753
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583863
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Height [mm]: 36,6
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- Drilled: no
- Item number: BDC4668
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583887
- Condition: New
Ate ist die für mich beste Marke einer Bremse die man einbauen kann
Weil der Kundenservice von ATE der beste ist, jeden cent wert
-
- for PR number: 1KE, 1KP, 1KT
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 32,76 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
Weil der Kundenservice von ATE der beste ist, jeden cent wert
ATE wir auch original verbaut und ich bin über die Qualität super zufrieden
-
- for PR number: 1KP, 1KT
- Fitting Position: Rear Axle
- Diameter [mm]: 230,0
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40,6
- Brake Disc Thickness [mm]: 9,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0960
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0123.1
- Manufacturer: ATE
- EAN number: 4006633297707
- Condition: New
Super Qualität!!
Weil die Qualität stimmt
-
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,7
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0479
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0150.1
- Manufacturer: ATE
- EAN number: 4006633298193
- Condition: New