Vehicle identification number: 0588704
Actual offers of Breather hose, fuel tank AUDI A3 Hatchback (8L1) S3 1.8 quattro 210 hp Petrol AMK
- Vehicle Equipment: for vehicles with charcoal canister
- Material: Plastic
- Hose Length [mm]: 345
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Seal Material: NBR (nitrile butadiene rubber)
- Item number: 119 281
- Our price: 12,09 €
- Manufacturer: TOPRAN
- EAN number: 1406930000018
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with charcoal canister
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Item number: V10-9431
- Our price: 14,37 €
- Manufacturer: VAICO
- EAN number: 4062375492909
- Condition: New
- Supplementary Article / Supplementary Info Info 2: with breather valve, with seal ring
- Vehicle Equipment: for vehicles with charcoal canister
- Item number: 74019
- Our price: 20,89 €
- Manufacturer: AIC
- EAN number: 4046283740192
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
- Fitting Position: Front Axle
- for PR number: 1LT
- Diameter [mm]: 312
- Brake System: BREMBO
- Brake Disc Type: internally vented
- Height [mm]: 34
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: A1598V
- Manufacturer: LPR
- EAN number: 8032532068793
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Brake System: Girling
- Height [mm]: 55,8
- Width [mm]: 105,3
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,1
- Production Number: 6010090
- Item number: 6010090
- Our price: 20,07 €
- Manufacturer: KRAFT
- EAN number: 5900427194250
- Condition: New
-
- Vehicle Identification Number (VIN) to: 8L-X-200000
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0460-7081.2
- Our price: 49,15 €
- Manufacturer: ATE
- EAN number: 4006633279758
- Condition: New
Ich habe mich für diese Beläge entschieden, da ich unzufrieden mit der Bremsleistung meiner bisher verbauten hinteren Bremse war. Ich kann sie nur empfehlen. Fühlbar mehr Bremsleistung und weniger Bremsstaubentwicklung. Top 👍
Gute Qualität, gute passgenauigkeit, kaum bremsstaub!
-
- for PR number: 1KF
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2820.2
- Our price: 43,06 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Vehicle Identification Number (VIN) to: 8L-X-200000
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Height [mm]: 74,0
- Width [mm]: 156,3
- Test Mark: E9 90R-02A1242 / 1629
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0470-7081.2
- Our price: 63,20 €
- Manufacturer: ATE
- EAN number: 4006633339841
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- for PR number: 1KF
- Fitting Position: Rear Axle
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 36,6
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0185
- Bore Ø [mm]: 15,6
- Drilled: no
- Item number: 24.0122-0163.1
- Manufacturer: ATE
- EAN number: 4006633069229
- Condition: New
der Preis passt.
-
- for PR number: 1LT
- Fitting Position: Front Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 34,4
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 133,8
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Ø [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0123.1
- Manufacturer: ATE
- EAN number: 4006633069236
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KE
- paired article number: FDB1788
- Product line: PREMIER
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 34
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Weight [kg]: 5,58
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Bore Ø [mm]: 65
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 7,5
- Drilled: no
- Item number: DDF1155
- Manufacturer: FERODO
- EAN number: 5016687308891
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 34,2
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Machining: Untreated
- Test Mark: E1 90R-02C0074 / 1613
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3528
- Manufacturer: DELPHI
- EAN number: 5012759140611
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 36
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Machining: Untreated
- Test Mark: E1 90R-02C0091 / 1610
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3611
- Manufacturer: DELPHI
- EAN number: 5012759159798
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Height [mm]: 37
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1602V
- Manufacturer: LPR
- EAN number: 8032532068830
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Brake System: Ate-Teves
- Height [mm]: 66,2
- Width [mm]: 155,3
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,6
- Production Number: 6000425
- Item number: 6000425
- Our price: 29,25 €
- Manufacturer: KRAFT
- EAN number: 5900427187177
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Height [mm]: 37
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC4764
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866157
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KF
- Fitting Position: Rear Axle
- Diameter [mm]: 256,0
- Brake Disc Type: Vented
- Height [mm]: 36,6
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Bore Ø [mm]: 15,8
- Drilled: no
- Item number: BAR22163
- Manufacturer: Barum
- EAN number: 4006633331265
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
diese Marke gute Qualität hat.
wel ATE Erstausrüszer ist.
-
- for PR number: 1KF
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 28,08 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
der Preis passt.
Markenartikel, bereits verwendet.
-
- Vehicle Identification Number (VIN) from: 8L-Y-000001
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0460-7122.2
- Our price: 61,30 €
- Manufacturer: ATE
- EAN number: 4006633058230
- Condition: New
Ceramic = weniger Bremsstaub auf den Felgen
-
- Vehicle Identification Number (VIN) from: 8L-Y-000001
- for PR number: 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1242 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring clamp diameter [mm]: 43
- Item number: 13.0470-7122.2
- Our price: 87,37 €
- Manufacturer: ATE
- EAN number: 4006633091756
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.