Actual offers of Brake kit AUDI A3 Sportback (8VA, 8VF) 2.0 TDI 150 hp Diesel DCYA
- usable for vehicles to construction year: 2016 / 11
- Item number: 3405B0938
- Our price: 81,55 €
- Manufacturer: RIDEX
- EAN number: 4066016333781
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25, 20,4
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Height [mm]: 49,9
- Number of wear indicators [per axle]: 1
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 171,5
- Bore Ø [mm]: 15,3
- Width [mm]: 160
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 144
- No. of holes 2: 9
- Height 2 [mm]: 64,5
- usable for vehicles to construction year: 2016 / 11
- Item number: 3405B0416
- Our price: 84,29 €
- Manufacturer: RIDEX
- EAN number: 4064138367295
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake Disc Thickness [mm]: 25, 20,4
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Height [mm]: 50
- Number of wear indicators [per axle]: 1
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 172
- Bore Ø [mm]: 15,3
- Width [mm]: 160
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 146
- No. of holes 2: 10
- Height 2 [mm]: 64,5
- usable for vehicles to construction year: 2016 / 11
- Item number: 3405B0411
- Our price: 93,72 €
- Manufacturer: RIDEX
- EAN number: 4064138337885
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 272,0
- Brake Disc Type: solid
- Number of Holes: 5
- Brake System
- Brake Disc Thickness [mm]: 9,7
- Wear Warning Contact: not prepared for wear indicator
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 8
- Vehicle Identification Number (VIN) from
- Height [mm]: 48,2
- Vehicle Identification Number (VIN) to
- Rim Hole Number
- Braking System
- Thickness [mm]: 16,2
- Centering Diameter [mm]: 65,0
- Bolt Hole Circle Ø 1 [mm]
- Width [mm]: 123
- Length [mm]: 123
- Height 2 [mm]: 61,2
- Quantity Unit: Axle Set
- Multi-piece: Multi-piece
- usable for vehicles to construction year: 2016 / 11
- Hole Arrangement / Number
- Number of bores
- Height 1 [mm]
- Width 2 [mm]
- Thickness 1 [mm]
- Item number: SKBK-10990459
- Our price: 54,54 €
- Manufacturer: STARK
- EAN number: 4064138613392
- Condition: New
- Diameter [mm]: 288,
- Brake Disc Type: Vented
- Number of Holes
- Brake System
- Brake Disc Thickness [mm]: 25,0
- Wear Warning Contact: excl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Vehicle Identification Number (VIN) from
- Vehicle Identification Number (VIN) to
- Rim Hole Number
- Braking System
- Thickness [mm]: 16
- Centering Diameter [mm]: 65,0
- Bolt Hole Circle Ø 1 [mm]
- Width [mm]: 123
- usable for vehicles to construction year: 2016 / 11
- Hole Arrangement / Number: 5 / 9
- Number of bores
- Height 1 [mm]
- Width 2 [mm]
- Thickness 1 [mm]
- Item number: SKBK-10990837
- Our price: 72,57 €
- Manufacturer: STARK
- EAN number: 4066016330834
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Number of Holes
- Brake System
- Brake Disc Thickness [mm]: 25
- Wear Warning Contact: incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112,0
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Minimum thickness [mm]: 22,0
- Vehicle Identification Number (VIN) from
- Height [mm]: 49,9, 62,4
- Vehicle Identification Number (VIN) to
- Number of wear indicators [per axle]: 1
- Rim Hole Number
- Braking System
- Thickness [mm]: 17,3
- Centering Diameter [mm]: 65,0
- Warning Contact Length [mm]: 173
- Bolt Hole Circle Ø 1 [mm]: 112
- Width [mm]: 146
- Wheel Bolt Bore Ø [mm]: 15,3
- Hole Arrangement / Number: 5 / 9
- Hub Bore Ø [mm]: 65
- Inner Diameter [mm]: 144
- Quantity Unit: Axle Set
- usable for vehicles to construction year: 2016 / 11
- Number of bores
- Height 1 [mm]
- Width 2 [mm]
- Thickness 1 [mm]
- Item number: SKBK-10991331
- Our price: 72,67 €
- Manufacturer: STARK
- EAN number: 4066016345593
- Condition: New
- Diameter [mm]: , 312,0
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake System
- Brake Disc Thickness [mm]: 25,0
- Wear Warning Contact: excl. wear warning contact
- Bolt Hole Circle Ø [mm]
- Minimum thickness [mm]: 22,0
- Vehicle Identification Number (VIN) from
- Vehicle Identification Number (VIN) to
- Rim Hole Number
- Braking System
- Thickness [mm]: 16
- Centering Diameter [mm]: 65,0
- Bolt Hole Circle Ø 1 [mm]
- Width [mm]: 123
- usable for vehicles to construction year: 2016 / 11
- Hole Arrangement / Number: 5 / 10
- Number of bores
- Height 1 [mm]
- Width 2 [mm]
- Thickness 1 [mm]
- Item number: SKBK-10991132
- Our price: 81,55 €
- Manufacturer: STARK
- EAN number: 4066016339653
- Condition: New
- for PR number: 1KJ, 1KX, 1KY, 1KZ, 2EE, 2EG, 2EK
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 20
- Weight [kg]: 15,45
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Quantity Unit: Set
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBK-10990508
- Our price: 82,30 €
- Manufacturer: STARK
- EAN number: 4066016198601
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- for PR number: 1KE, 1KK, 1KZ
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,7
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 8
- Weight [kg]: 8,81
- Centering Diameter [mm]: 65
- Item number: V10-6744
- Our price: 83,90 €
- Manufacturer: VAICO
- EAN number: 4062375266029
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for PR number: 1ZE, 1ZP
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake System: Lucas / TRW
- Brake Disc Thickness [mm]: 25
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Height [mm]: 50
- Number of wear indicators [per axle]: 1
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 172
- Bore Ø [mm]: 15,3
- Width [mm]: 160
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 144
- No. of holes 2: 9
- Height 2 [mm]: 64,5
- Item number: 47839
- Our price: 96,29 €
- Manufacturer: MAPCO
- EAN number: 4043605684783
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake System: Lucas / TRW
- Brake Disc Thickness [mm]: 25
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Height [mm]: 49,9
- Number of wear indicators [per axle]: 1
- Thickness [mm]: 20,4
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 171
- Bore Ø [mm]: 15,3
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 144
- No. of holes 2: 9
- Width 1 [mm]: 160
- Height 2 [mm]: 64,5
- Net weight [kg]: 16,81
- Gross Weight [kg]: 17,13
- Item number: 202501451
- Our price: 100,37 €
- Manufacturer: MASTER-SPORT
- EAN number: 4251729622493
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 10
- Required quantity: 1
- Item number: 47629
- Our price: 100,65 €
- Manufacturer: MAPCO
- EAN number: 4043605960801
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- for PR number: 1LV, 1ZA, 1ZB, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Wear Warning Contact: with integrated wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 22
- Weight [kg]: 19,11
- Centering Diameter [mm]: 65
- Item number: V10-6743
- Our price: 110,91 €
- Manufacturer: VAICO
- EAN number: 4062375265923
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
![BRB3405N0033 Brake kits Audi A3 2.0TDI 150 hp 110 kW DFGA 2012 8VA, 8VF](https://cdn.autodoc.de/brands/thumbs/65.png?m=0)
- Product line: COATED DISC LINE
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Number of Holes: 5
- Brake System: TRW
- Brake Disc Thickness [mm]: 25
- Wear Warning Contact: incl. wear warning contact
- Minimum thickness [mm]: 22
- Number of wear indicators [per axle]: 1
- Thickness [mm]: 20
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 175
- Width [mm]: 160
- Item number: BRB3405N0033
- Our price: 121,44 €
- Manufacturer: BREMBO
- EAN number: BRB3405N0033
- Condition: New
- for PR number: 1ZF, 1ZH
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Wear Warning Contact: with integrated wear sensor
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 21
- Weight [kg]: 15,5
- Centering Diameter [mm]: 65
- Item number: V10-6742
- Our price: 134,96 €
- Manufacturer: VAICO
- EAN number: 4062375265589
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
- for PR number: 1ZP, 1ZE
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 22
- Weight [kg]: 9,4
- Centering Diameter [mm]: 65
- Item number: V10-6741
- Our price: 136,89 €
- Manufacturer: VAICO
- EAN number: 4062375265459
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake System: Lucas / TRW
- Brake Disc Thickness [mm]: 25, 20,4
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Quality: HPS standard
- Minimum thickness [mm]: 22
- Surface: Coated
- Height [mm]: 50
- Number of wear indicators [per axle]: 1
- Machining: High-carbon
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 172, 171,5
- Bore Ø [mm]: 15,3
- Width [mm]: 160
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 144
- No. of holes 2: 9
- Height 2 [mm]: 64,5
- Item number: 47839HPS
- Our price: 136,90 €
- Manufacturer: MAPCO
- EAN number: 4043605684790
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
Super Qualität
Super Händler !!!
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Number of Holes: 5
- Brake System: Lucas / TRW
- Brake Disc Thickness [mm]: 25, 20,4
- Wear Warning Contact: prepared for wear indicator, incl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Quality: HPS standard
- Minimum thickness [mm]: 22
- Surface: Coated
- Height [mm]: 50
- Number of wear indicators [per axle]: 1
- Machining: High-carbon
- Centering Diameter [mm]: 65
- Warning Contact Length [mm]: 172
- Bore Ø [mm]: 15,3
- Width [mm]: 160
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Inner Diameter [mm]: 146
- No. of holes 2: 9
- Height 2 [mm]: 64,5
- Item number: 47634HPS
- Our price: 139,99 €
- Manufacturer: MAPCO
- EAN number: 4043605680396
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
- for PR number: 1KJ, 1KX, 1KY, 1KZ, 2EE, 2EG, 2EK
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Bolt Hole Circle Ø [mm]: 112
- Supplementary Article / Supplementary Info Info 2: with brake pads
- Minimum thickness [mm]: 20
- Weight [kg]: 15,45
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Item number: V10-6630
- Our price: 170,99 €
- Manufacturer: VAICO
- EAN number: 4062375255344
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
bereits gute Erfahrungen mit dem Hersteller machen konnte bei Bremsen. RIDEX hat ein sehr gutes Preis-/Leistungsverhältnis.
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Number of Holes: 5
- Brake Disc Thickness [mm]: 12, 16,4
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Bore Ø [mm]: 15,3
- Inner Diameter [mm]: 173
- Width 1 [mm]: 123
- Height 1 [mm]: 61,2
- Width 2 [mm]: 123
- Height 2 [mm]: 56,2
- No. of holes 2: 9
- usable for vehicles to construction year: 2016 / 11
- Item number: 3405B0394
- Our price: 41,88 €
- Manufacturer: RIDEX
- EAN number: 4064138155588
- Condition: New
RRP is the recommended retail price set by the manufacturer or importer of the product and provided by the manufacturer, supplier or retailer. AUTODOC displays the RRP (VAT incl.) for a product if it has been received from at least one supplier or another source that has such information.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3