Vehicle identification number: 0600624
Actual offers of Brake discs VW Jetta Mk2 (19E, 1G2, 165) 1.3 Cat 55 hp Petrol MH
ich habe bei ihnen immer gut und günstig eingekauft . bin mit ihrer Firma sehr zufrieden,zuverlässig.freundliche auskunft zuverlässige Auskunft.Mit freundlichem Gruß Roth V aus 88046 Friedrichshafen
- Fitting Position: Front Axle
- Diameter [mm]: 239,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 38,6
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 4 / 5
- Wheel Bolt Bore Ø [mm]: 13,6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 124,5
- Weight [kg]: 3,0
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Item number: 82B0693
- Manufacturer: RIDEX
- EAN number: 4059191318261
- Condition: New
Hat alles gepasst und hält nach einem Jahr immernoch gut, preis unschlagbar
Super Preis Leistung, Qualität top
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Diameter [mm]: 239,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 35,06
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 4 / 5
- Wheel Bolt Bore Ø [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 124,5
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0655
- Manufacturer: RIDEX
- EAN number: 4059191314850
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 35
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 82B0655P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448072354
- Condition: New
-
- TecDoc Engine Number: 2G, NZ
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Vehicle Identification Number (VIN) from: ..-E-855001
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 35,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 135
- Replace in pairs only
- Drilled: no
- Item number: 103 406
- Manufacturer: TOPRAN
- EAN number: 6153500000026
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
das Produkt überzeugt
- Fitting Position: Front Axle
- Diameter [mm]: 239,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 38,6
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 4 / 5
- Wheel Bolt Bore Ø [mm]: 13,6
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 124,5
- Weight [kg]: 3,0
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Item number: SKBD-0022843
- Manufacturer: STARK
- EAN number: 4059191082353
- Condition: New
-
- Braking / Drive Dynamics: for vehicles without ABS
- Vehicle Identification Number (VIN) to: 16-E-855000
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 38,9
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bore Ø 1 [mm]: 13,75
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Weight [kg]: 3,65
- Brake Disc Hub Height [mm]: 29
- Packaging width [cm]: 26
- Packaging height [cm]: 8
- Packaging Depth [cm]: 26
- Fulfils ECE norm: R90
- Drilled: no
- Item number: V10-40003
- Manufacturer: VAICO
- EAN number: 4046001184901
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Diameter [mm]: 239,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 35,06
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 4 / 5
- Wheel Bolt Bore Ø [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 124,5
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: SKBD-0022805
- Manufacturer: STARK
- EAN number: 4059191075393
- Condition: New
Es eine gute Marke ist
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 35
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.4177.10
- Manufacturer: BREMBO
- EAN number: 8020584417713
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 35
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Weight [kg]: 6,92
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 7,4
- Drilled: no
- Item number: 561141CH
- Manufacturer: CHAMPION
- EAN number: 4060426064600
- Condition: New
preis-leistung TOP
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 39
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.2631.34
- Manufacturer: BREMBO
- EAN number: 8020584013144
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 35,4
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Weight [kg]: 3,938
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Hub Height [mm]: 23
- Packaging width [cm]: 26
- Packaging height [cm]: 7
- Packaging Depth [cm]: 26
- Drilled: no
- Item number: V10-40036
- Manufacturer: VAICO
- EAN number: 4046001179464
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 35,2
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 13,8
- Drilled: no
- Item number: 0 986 478 011
- Manufacturer: BOSCH
- EAN number: 3165141023329
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 38,6
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Weight [kg]: 6,08
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 8,2
- Drilled: no
- Item number: 561087CH
- Manufacturer: CHAMPION
- EAN number: 4060426064563
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 239
- Brake System: ATE
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 35
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Weight [kg]: 6,92
- Tightening Torque [Nm]: 120
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 25
- Packaging width [cm]: 25
- Packaging height [cm]: 8,5
- Drilled: no
- Item number: 561141JC
- Manufacturer: JURID
- EAN number: 3306437207010
- Condition: New
-
- TecDoc Engine Number: NZ
- Construction Year from: 01 / 1990
- Transmission Type: Manual Transmission
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 35
- Minimum thickness [mm]: 10
- Weight [kg]: 3,36
- Number of mounting bores: 1
- Drilled: no
- Item number: ADV184352
- Manufacturer: BLUE PRINT
- EAN number: 5057746013981
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- TecDoc Engine Number: NZ
- Construction Year from: 01 / 1990
- Transmission Type: Manual Transmission
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 35,1
- Minimum thickness [mm]: 10
- Weight [kg]: 3,39
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 02121
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816021216
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Vehicle Identification Number (VIN) to: 16-E-855000
- Fitting Position: Front Axle
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 38,6
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: A1011P
- Manufacturer: SAMKO
- EAN number: 2234315866485
- Condition: New
... es günstig und ein guter hersteller ist
-
- TecDoc Engine Number: NZ
-
- TecDoc Engine Number: MH, 2G, NZ
- Construction Year from: 01 / 1989
- Transmission Type: Manual Transmission
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 38,6
- Minimum thickness [mm]: 8
- Weight [kg]: 3,025
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 02122
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816021223
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: NZ
- Construction Year from: 01 / 1990
- Transmission Type: Manual Transmission
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 35,1
- Minimum thickness [mm]: 10
- Weight [kg]: 3,39
- Number of mounting bores: 1
- Drilled: no
- Item number: 32 90 2121
- Manufacturer: SWAG
- EAN number: 4044688522306
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
Der Preis akzeptabel ist.
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Product line: PREMIER
- Diameter [mm]: 239
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 35
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10
- Weight [kg]: 6,92
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Bore Ø [mm]: 65
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 24
- Packaging width [cm]: 24
- Packaging height [cm]: 8
- Drilled: no
- Item number: DDF103
- Manufacturer: FERODO
- EAN number: 5016687110395
- Condition: New
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my VW Jetta Mk2 (19E, 1G2, 165) 1.3 Cat 55hp / 40kW?
The cost of replacing brake discs ranges from 140 to 400 pounds