Vehicle identification number: 0603CDN
Actual offers of Brake discs VW Arteon (3H7) 2.0 TDI 4motion 240 hp Diesel CUAA
-
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM
- Diameter [mm]: 300,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 12,0
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 5 / 10
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 173,0
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B1201
- Manufacturer: RIDEX
- EAN number: 4059191384266
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Uncoated
- Height [mm]: 50
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without screw, without ABS sensor ring
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0031
- Manufacturer: RIDEX
- EAN number: 4059191312726
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LA, 1LB
- Fitting Position: Front Axle
- Diameter [mm]: 340,0
- Brake Disc Type: Vented
- Height [mm]: 49,6
- Brake Disc Thickness [mm]: 30,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 10
- Wheel Bolt Bore Ø [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0828
- Manufacturer: RIDEX
- EAN number: 4059191135516
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM
- Diameter [mm]: 300,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 12,0
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 5 / 10
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 173,0
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0023343
- Manufacturer: STARK
- EAN number: 4059191354658
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KF, 1KZ, 2ER
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Surface: Uncoated
- Height [mm]: 48,5
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0, 140
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0020369
- Manufacturer: STARK
- EAN number: 4059191286232
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- for PR number: 1KU
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48,3
- Minimum thickness [mm]: 10
- Weight [kg]: 5,16
- Number of mounting bores: 5
- Drilled: no
- Item number: 30 10 4496
- Manufacturer: SWAG
- EAN number: 4054228044960
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- for PR number: 1KU
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48
- Minimum thickness [mm]: 10
- Weight [kg]: 5,16
- Number of mounting bores: 5
- Drilled: no
- Item number: ADV184375
- Manufacturer: BLUE PRINT
- EAN number: 5057746073404
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM
- Diameter [mm]: 300
- Brake Disc Type: solid
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Item number: 231-04-094
- Manufacturer: ABAKUS
- EAN number: 224657215319342153193
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 12
- for PR number: 1KU, 2EM
- Centering Diameter [mm]: 65
- Rim Hole Number: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Brake Disc Hub Height [mm]: 36,2
- Drilled: no
- Item number: V10-40090
- Manufacturer: VAICO
- EAN number: 4062375128020
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Info: COATED
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Surface: Coated
- Height [mm]: 48,2
- Brake Disc Thickness [mm]: 12
- for PR number: 1KU, 2EI, 2EM
- Centering Diameter [mm]: 65,0
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Replace in pairs only
- Drilled: no
- Item number: 116 888
- Manufacturer: TOPRAN
- EAN number: 1245470000023
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Height [mm]: 48,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,909
- No. of holes 2: 9
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V10-80084
- Manufacturer: VAICO
- EAN number: 4046001349461
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Uncoated
- Height [mm]: 50
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- No. of holes 2: 9
- Bore Ø [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without screw, without ABS sensor ring
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: SKAD-2030
- Manufacturer: STARK
- EAN number: 4059191001095
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 25
- for PR number: 1ZA
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49,7
- Minimum thickness [mm]: 22
- Weight [kg]: 8,6
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 24384
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243847
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- for PR number: 1KU
- Fitting Position: Rear Axle
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Height [mm]: 48,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Drilled: no
- Item number: 40H9039-JPN
- Manufacturer: JPN
- EAN number: 226985177957631779576
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 25
- for PR number: 1ZA
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 50
- Minimum thickness [mm]: 22
- Weight [kg]: 8,6
- Number of mounting bores: 1
- for OE number: 5Q0 615 301 F
- Drilled: no
- Item number: ADV184308
- Manufacturer: BLUE PRINT
- EAN number: 5050063006339
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- for PR number: 2EM
-
- for PR number: 1KU
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Painted, Cross-hatch
- Height [mm]: 48,3
- Brake Disc Thickness [mm]: 11,9
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 143,9
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 6110747
- Manufacturer: METZGER
- EAN number: 4250032692827
- Condition: New
with cross-grinding
-
- Fitting Position: Rear Axle
- for PR number: 1KZ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 48,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Machining: Untreated
- Test Mark: E1 90R-02C0289 / 1665
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 48,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 A84
- Manufacturer: BOSCH
- EAN number: 4047025362894
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- for PR number: 1KZ
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49
- Minimum thickness [mm]: 20
- Weight [kg]: 7,04
- Number of mounting bores: 1
- Drilled: no
- Item number: ADV184310
- Manufacturer: BLUE PRINT
- EAN number: 5050063006353
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- for PR number: 1KU
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 48,3
- Weight [kg]: 5,17, 5,16
- Number of mounting bores: 5
- Observe service information
- Drilled: no
- Item number: 104496
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224044964
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my VW Arteon (3H7) 2.0TDI 4motion 240hp / 176kW?
The cost of replacing brake discs ranges from 140 to 400 pounds