Actual offers of Brake discs OPEL Astra J Box Body / Estate (P10) 1.7 CDTi 131 hp Diesel A 17 DTS
-
- Fitting Position: Rear Axle
- Brake Size: 15"
- Diameter [mm]: 268
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 10
- Weight [kg]: 4,7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0479P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448072491
- Condition: New
-
- Fitting Position: Rear Axle
- Brake Size: 15"
- Fitting Position: Rear Axle
- Diameter [mm]: 268,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 5 / 6
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 147,2
- Weight [kg]: 4,7
- Bore Ø [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0479
- Manufacturer: RIDEX
- EAN number: 4059191318704
- Condition: New
-
- Fitting Position: Rear Axle
- Brake Size: 16", 17"
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 70,7
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Ø [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 157
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Item number: 82B0434
- Manufacturer: RIDEX
- EAN number: 4059191318193
- Condition: New
-
- Fitting Position: Front Axle
- Brake Size: 15"
- Fitting Position: Front Axle
- Diameter [mm]: 276,0
- Brake Disc Type: internally vented
- Surface: Uncoated
- Height [mm]: 45,5
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 139,0
- Bore Ø [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: 82B0354
- Manufacturer: RIDEX
- EAN number: 4059191273409
- Condition: New
-
- Fitting Position: Rear Axle
- Trim Level: JQ5 model
- Diameter [mm]: 315
- Brake Disc Type: perforated / vented
- Height [mm]: 45
- Brake Disc Thickness [mm]: 23
- Centering Diameter [mm]: 71
- Number of Holes: 5
- Hole Arrangement / Number: 5 / 6
- Minimum thickness [mm]: 20
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without wheel hub, without bolts / screws
- Drilled: yes
- Item number: 82B1650
- Manufacturer: RIDEX
- EAN number: 4059191546282
- Condition: New
-
- Fitting Position: Front Axle
- Brake Size: 16"
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Height [mm]: 45,5
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 70,7
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Ø [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 149
- Weight [kg]: 8,5
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: 82B0409
- Manufacturer: RIDEX
- EAN number: 4059191317561
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Brake Size: 17"
- Fitting Position: Front Axle
- Diameter [mm]: 321
- Brake Disc Type: internally vented
- Height [mm]: 45,6
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 70,7
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 27
- Inner Diameter [mm]: 160,0
- Bore Ø [mm]: 14,2
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: 82B0845
- Manufacturer: RIDEX
- EAN number: 4059191134861
- Condition: New
-
- Fitting Position: Rear Axle
- Brake Size: 15"
- Fitting Position: Rear Axle
- Diameter [mm]: 268,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 5 / 6
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 147,2
- Weight [kg]: 4,7
- Bore Ø [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0022194
- Manufacturer: STARK
- EAN number: 4059191065745
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 45
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Hole Arrangement / Number: 5+1
- Minimum thickness [mm]: 10
- Weight [kg]: 9,85
- Tightening Torque [Nm]: 110
- Version: JC
- Test Mark: R90 Homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 12
- Drilled: no
- Item number: 562651JC
- Manufacturer: JURID
- EAN number: 3306437229234
- Condition: New
-
- Fitting Position: Rear Axle
- Brake Size: 16", 17"
- Fitting Position: Rear Axle
- Diameter [mm]: 292,0
- Brake Disc Type: solid
- Surface: Uncoated
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 70,7
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Ø [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 157
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0022125
- Manufacturer: STARK
- EAN number: 4059191063550
- Condition: New
-
- Fitting Position: Rear Axle
- Rim Size [inch]: 16.0, 17.0
- for POC: J17 / J60
- Product line: COATED
- Diameter [mm]: 292
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 45,6
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Hub Diameter [mm]: 168
- Weight [kg]: 5,32
- Drilled: no
- Item number: 18033
- Manufacturer: A.B.S.
- EAN number: 8717109507683
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Height [mm]: 45
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Hub Diameter 1 [mm]: 60
- Minimum thickness [mm]: 10
- Weight [kg]: 5,15
- Fulfils ECE norm: R90
- Drilled: no
- Item number: V40-40019
- Manufacturer: VAICO
- EAN number: 4046001552083
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Height [mm]: 44,9
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Item number: 231-04-103
- Manufacturer: ABAKUS
- EAN number: 224657215319432153194
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: solid
- Height [mm]: 45
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 70,7
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 10
- Weight [kg]: 6,07
- Brake Disc Hub Height [mm]: 32,9
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V40-40020
- Manufacturer: VAICO
- EAN number: 4046001551093
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Product line: PREMIER Coat+ disc
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 45
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Weight [kg]: 9,85
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packaging length [cm]: 28
- Packaging width [cm]: 28
- Packaging height [cm]: 11,2
- Drilled: no
- Item number: DDF1872C
- Manufacturer: FERODO
- EAN number: 4044197845774
- Condition: New
-
- Fitting Position: Front Axle
- Brake Size: 15"
- Fitting Position: Front Axle
- Diameter [mm]: 276,0
- Brake Disc Type: internally vented
- Surface: Uncoated
- Height [mm]: 45,5
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 60
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 139,0
- Bore Ø [mm]: 14,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: SKBD-0020359
- Manufacturer: STARK
- EAN number: 4059191042432
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Height [mm]: 45,5
- Brake Disc Thickness [mm]: 26
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 23
- Brake Disc Hub Height [mm]: 19,6
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V40-80053
- Manufacturer: VAICO
- EAN number: 4046001622311
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: solid
- Height [mm]: 45
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 70,7
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Item number: 231-04-096
- Manufacturer: ABAKUS
- EAN number: 224657215319362153193
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Thickness [mm]: 45
- Minimum thickness [mm]: 10
- Weight [kg]: 4,74
- Number of mounting bores: 1
- for POC: J67
- Drilled: no
- Item number: ADG043164
- Manufacturer: BLUE PRINT
- EAN number: 5050063156508
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 268
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 105
- Thickness [mm]: 45,1
- Minimum thickness [mm]: 10
- Weight [kg]: 4,74
- Number of mounting bores: 1
- for POC: J67
- Drilled: no
- Item number: 40 93 9185
- Manufacturer: SWAG
- EAN number: 4044688578891
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my OPEL Astra J Box Body / Estate (P10) 1.7CDTi (35) 131hp / 96kW?
The cost of replacing brake discs ranges from 140 to 400 pounds