Vehicle identification number: 0710444
Actual offers of Brake discs MERCEDES-BENZ E-Class T-modell (S210) E 430 4.3 4-matic 279 hp Petrol M 113.940
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Height [mm]: 46,5
- Brake Disc Thickness [mm]: 32,0
- Centering Diameter [mm]: 67,0
- Hole Arrangement / Number: 5 / 6
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 29,4
- Inner Diameter [mm]: 154,0
- Bore Ø [mm]: 13,3
- Drilled: no
- Item number: 82B1280
- Manufacturer: RIDEX
- EAN number: 4059191694198
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Height [mm]: 55,3
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 67
- Number of Holes: 6
- Rim Hole Number: 5
- Bore Ø 2 [mm]: 9,2
- Bore Ø 1 [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter 1 [mm]: 67
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164
- Weight [kg]: 4,521
- Fulfils ECE norm: R90
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V30-80059
- Manufacturer: VAICO
- EAN number: 4046001349553
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 56,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10,3
- Drilled: no
- Item number: M2747P
- Manufacturer: SAMKO
- EAN number: 2234315873898
- Condition: New
ich schon öfters bei ihnen gekauft habe.
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 53,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10,3
- Weight [kg]: 10,46
- Tightening Torque [Nm]: 110
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 14,5
- Drilled: no
- Item number: 562051JC
- Manufacturer: JURID
- EAN number: 3306437043823
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 53,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm] 0
- Minimum thickness [mm]: 10,3
- Weight [kg]: 10,46
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 13
- Drilled: no
- Item number: 562051CH
- Manufacturer: CHAMPION
- EAN number: 4060426065645
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 56,3
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10,3
- Drilled: no
- Item number: M2747P
- Manufacturer: LPR
- EAN number: 8032532099476
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 56
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10,3
- Machining: Untreated
- Test Mark: E1 90R-02C0100 / 1555
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3602
- Manufacturer: DELPHI
- EAN number: 5012759159743
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 56
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bore Ø 2 [mm]: 9,2
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10,3
- Weight [kg]: 5,878
- Brake Disc Hub Height [mm]: 44
- Packaging width [cm]: 30
- Packaging height [cm]: 12
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V30-40042
- Manufacturer: VAICO
- EAN number: 4046001248283
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 56
- Minimum thickness [mm]: 10,3
- Weight [kg]: 5,162
- Number of mounting bores: 1
- Drilled: no
- Item number: 17829
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816178293
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 56
- Minimum thickness [mm]: 10,3
- Weight [kg]: 5,162
- Number of mounting bores: 1
- Drilled: no
- Item number: ADU174337
- Manufacturer: BLUE PRINT
- EAN number: 5050063309935
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 55,2
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 8,3
- Weight [kg]: 4,53
- Test Mark: K.B.A.: 61210
- Drilled: no
- Item number: 6555.00
- Manufacturer: REMSA
- EAN number: 8427975155634
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Painted, Cross-hatch
- Height [mm]: 56
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10,3
- Inner Diameter [mm]: 158
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 6110218
- Manufacturer: METZGER
- EAN number: 4250032640163
- Condition: New
with cross-grinding
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 54
- Minimum thickness [mm]: 19,4
- Weight [kg]: 6,926
- Number of mounting bores: 1
- Drilled: no
- Item number: ADA104330
- Manufacturer: BLUE PRINT
- EAN number: 5050063628418
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Product line: COAT Z
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 56
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10,3
- Weight [kg]: 5,2
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 400.3600.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719076
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 56
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10,3
- Inner Diameter [mm]: 164,0
- Required quantity: 2
- Bore Ø [mm]: 13,0
- Net weight [kg]: 5,27
- Gross Weight [kg]: 5,47
- Drilled: no
- Item number: 24011201491-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083137537
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Height [mm]: 55,2
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 8,3
- Weight [kg]: 4,53
- Test Mark: K.B.A.: 61210
- Drilled: no
- Item number: 6555.00
- Manufacturer: ROADHOUSE
- EAN number: 2215210084606
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Construction Year from: 06 / 1999
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 53,5
- Minimum thickness [mm]: 19,4
- Weight [kg]: 6,926
- Number of mounting bores: 1
- for OE number: 210 423 07 12
- Drilled: no
- Item number: 23212
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816232124
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Construction Year from: 06 / 1999
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 53,5
- Minimum thickness [mm]: 19,4
- Weight [kg]: 6,926
- Number of mounting bores: 1
- Drilled: no
- Item number: 10 92 3212
- Manufacturer: SWAG
- EAN number: 4044688532480
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Product line: PREMIER Coat+ disc
- Fitting Position: Rear Axle
- Diameter [mm]: 290
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 53,5
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10,3
- Weight [kg]: 5,23
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 13
- Drilled: no
- Item number: DDF1251C
- Manufacturer: FERODO
- EAN number: 4044197560134
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Height [mm]: 55,3
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bore Ø 1 [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7,789
- Brake Disc Hub Height [mm]: 33,5
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V30-80058
- Manufacturer: VAICO
- EAN number: 4046001349546
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my MERCEDES-BENZ E-Class T-modell (S210) E430T 4-matic (210.283) 279hp / 205kW?
The cost of replacing brake discs ranges from 140 to 400 pounds