Vehicle identification number: 0005DCN
Actual offers of Brake discs BMW 7 (G11, G12) 740 d, Ld Mild-Hybrid xDrive 340 hp Diesel/Electro B57 D30 B
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without M-sport brakes
- Fitting Position: Rear Axle
- Diameter [mm]: 345,0
- Brake Disc Type: two-part brake disc, Vented
- Height [mm]: 64,2
- Brake Disc Thickness [mm]: 24,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 171,8
- Bore Ø [mm]: 16,5
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B2287
- Manufacturer: RIDEX
- EAN number: 4059191876167
- Condition: New
-
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles without sports package
- Fitting Position: Right
- for SA code: S212A
- Fitting Position: Front Axle
- Diameter [mm]: 348
- Brake Disc Type: Vented
- Height [mm]: 66,1
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Brake Disc Hub Height [mm]: 30,2
- Drilled: no
- Item number: V20-40043
- Manufacturer: VAICO
- EAN number: 4062375137381
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with a standard brake system
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,1
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2946.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238768579
- Condition: New
-
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles without sports package
- Fitting Position: Left
- for SA code: S212A
- Fitting Position: Front Axle
- Diameter [mm]: 348
- Brake Disc Type: Vented
- Height [mm]: 66,1
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Brake Disc Hub Height [mm]: 30,2
- Drilled: no
- Item number: V20-40044
- Manufacturer: VAICO
- EAN number: 4062375137398
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Minimum thickness [mm]: 34,4
- Weight [kg]: 16,8
- Number of mounting bores: 1
- paired article number: ADBP430096
- Drilled: no
- Item number: ADBP430097
- Manufacturer: BLUE PRINT
- EAN number: 5057746263928
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Minimum thickness [mm]: 34,4
- Weight [kg]: 16,8
- Number of mounting bores: 1
- paired article number: ADBP430097
- Drilled: no
- Item number: ADBP430096
- Manufacturer: BLUE PRINT
- EAN number: 5057746263911
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 370
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Rim Hole Number: 5
- Weight [kg]: 10,33
- Drilled: no
- Item number: 18830
- Manufacturer: A.B.S.
- EAN number: 8717109765854
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Minimum thickness [mm]: 34,4
- Weight [kg]: 16,8
- Number of mounting bores: 1
- paired article number: 175490
- Drilled: no
- Item number: 175493
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224754931
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle Left
- Braking System: for vehicles with a standard brake system
- for SA code: S212A
- Product line: COAT Z
- Diameter [mm]: 348
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Weight [kg]: 12,9
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2937.20
- Drilled: no
- Item number: 150.2936.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238767008
- Condition: New
-
- Fitting Position: Front Axle Right
- Braking System: for vehicles with a standard brake system
- for SA code: S212A
- Product line: COAT Z
- Diameter [mm]: 348
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Weight [kg]: 12,9
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2936.20
- Drilled: no
- Item number: 150.2937.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238767015
- Condition: New
Sample photo only
-
- Fitting Position: Front Axle Left
- Suspension: for vehicles without M technology
- Diameter [mm]: 348
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 34,4
- paired article number: B2109VR
- Multi-piece: one-piece
- Item number: B2108VR
- Manufacturer: LPR
- EAN number: 8032928219372
- Condition: New
No degreasing, ready-to-fit solution.
Sample photo only
-
- Fitting Position: Front Axle Right
- Suspension: for vehicles without M technology
- Diameter [mm]: 348
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 34,4
- paired article number: B2108VR
- Multi-piece: one-piece
- Item number: B2109VR
- Manufacturer: LPR
- EAN number: 8032928219389
- Condition: New
No degreasing, ready-to-fit solution.
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with M-sport brakes
- Diameter [mm]: 370
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 10,4
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.2964.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238781301
- Condition: New
-
- Fitting Position: Rear Axle
- Braking System: for vehicles with a standard brake system
- Product line: TWO-PIECE DISCS LINE
- Diameter [mm]: 345
- Brake Disc Type: two-part brake disc, internally vented
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.D096.13
- Manufacturer: BREMBO
- EAN number: 8020584224441
- Condition: New
- Fitting Position: Front Axle Right
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Minimum thickness [mm]: 34,4
- Weight [kg]: 16,8
- Number of mounting bores: 1
- paired article number: 175493
- Drilled: no
- Item number: 175490
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224754900
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
- Fitting Position: Rear Axle Left
- Braking System: for vehicles with M-performance brakes
- Diameter [mm]: 370
- Brake Disc Type: internally vented, Drilled dimples
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 10,4
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2960.20
- directional
- Drilled: no
- Item number: 150.2959.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238776413
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle Right
- Braking System: for vehicles with M-performance brakes
- Diameter [mm]: 370
- Brake Disc Type: internally vented, Drilled dimples
- Surface: Coated
- Height [mm]: 64
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 10,4
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2959.20
- directional
- Drilled: no
- Item number: 150.2960.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238776420
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 345
- Brake Disc Type: two-part brake disc, Vented
- Surface: Coated
- Height [mm]: 64,2
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Machining: High-carbon
- Observe service information
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 16,5
- Drilled: no
- Item number: 0 986 479 F61
- Manufacturer: BOSCH
- EAN number: 4047026353075
- Condition: New
-
- Fitting Position: Front Axle Right
- Braking System: for vehicles with a standard brake system
- not for SA code: S212A
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Weight [kg]: 15,3
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2954.20
- Drilled: no
- Item number: 150.2955.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238776147
- Condition: New
-
- Fitting Position: Front Axle Left
- Braking System: for vehicles with a standard brake system
- not for SA code: S212A
- Diameter [mm]: 374
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 66
- Brake Disc Thickness [mm]: 36
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 34,4
- Weight [kg]: 15,3
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: 150.2955.20
- Drilled: no
- Item number: 150.2954.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238776130
- Condition: New
- 1
- 2
- 3
- 4
How much will brake disc replacement cost for my BMW 7 (G11, G12) 740d, Ld Mild-Hybrid xDrive 340hp / 250kW?
The cost of replacing brake discs ranges from 140 to 400 pounds