AUDI TT Coupe (8N3) 1.8 T (110 kW / 150 hp) 2002
Vehicle identification number: 8307309
Vehicle identification number: 8307309
Vehicle details
Change
Info: Audi TT 8N 1.8T
Type:
1.8 T
Power [hp]:
150
Manuf. year (from - to):
09.2002 - 06.2006
Engine data
Engine volume
1 781 cm3
Engine power
150 PS
Full load rpm
from 5 700 rpm
Maximum torque
210 H*m
Peak torque rpm
from 1 750 to 4 600 rpm
Engine type
Gasoline
Engine configuration
Inline
Intake type
Multi point injection
Number of cylinders
4
Number of valves per cylinder
5
Bore diameter
81 mm
Piston stroke
86.4 mm
AUM
Vehicle dimensions
Seats
4
Length * width * height
4 041 x 1 764 x 1 346 mm
Wheelbase
2 422 mm
Front/rear track
1 528/1 513 mm
Curb weight
1 280 kg
Luggage volume
from 270 to 540 L
Maximum weight
1 665 kg
Suspension and brakes data
Front suspension
Suspension strut
Rear suspension
coil springs
Front brakes
Ventilated disc
Rear brakes
Disc
Transmission and steering information
Transmission
Manual, 5 gears
Wheel drive
Front
Turning cycle
10.6 m.
Operating characteristics
Fuel tank volume
55 L
Recommended fuel
RON 95
Ecologic standard
EURO IV
Maximum speed
194 km/h
Acceleration from standstill to 100 km/h
8.6 s
Combined fuel consumption
8.1 L per 100 km
Urban fuel consumption
11.1 L per 100 km
Highway fuel consumption
6.3 L per 100 km
cruising range
from 500 to 870 km
Actual offers of Brake discs AUDI TT Coupe (8N3) 1.8 T 150 hp Petrol AUM
Filter
250 items
RIDEX 82B0003 Brake disc Rear Axle, 230x9mm, 05/06x100, solid, Grey Cast Iron
Show all reviews
Reviews - 20
Article number: 82B0003
R.K.
31.05.2024
Preis und Qualität ist Okay
B.D.
26.04.2024
Preis Leistung stimmt
-
- Fitting Position: Rear Axle
- for PR number: 1KK
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Material: Grey Cast Iron
- Height [mm]: 39,5
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Inner Diameter [mm]: 125
- Bore Ø [mm]: 16
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0003
- Manufacturer: RIDEX
- EAN number: 4059191312597
- Condition: New
Show OEM numbers of the product
Details
RIDEX 82B0193 Brake disc Front Axle, 312x25,0mm, 5/10x100,0, internally vented
Show all reviews
Reviews - 10
Article number: 82B0193
A.Z.
08.08.2023
Gutes angebot sehr günstig
-
- for PR number: 1LD, 1LT, 1LV
- Fitting Position: Front Axle
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Height [mm]: 34,4
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 5 / 10
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 135
- Bore Ø [mm]: 15,6, 16
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0193
- Manufacturer: RIDEX
- EAN number: 4059191315406
- Condition: New
Show OEM numbers of the product
Details
ABAKUS 231-04-001 Brake disc Rear Axle, 230x9mm, 5x100, solid
Article number: 231-04-001
Reviews - 2
-
- for PR number: 1KK, 2EK
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Height [mm]: 40,6
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Required quantity: 2
- Test Mark: ECE R90
- Replace in pairs only
- Article number of recommended accessories: 131-07-609, 131-07-610, 131-07-619, 131-07-620
- Item number: 231-04-001
- Manufacturer: ABAKUS
- EAN number: 224657215318422153184
- Condition: New
Show OEM numbers of the product
Details
STARK SKAD-2002 Brake disc Rear Axle, 230x9mm, 05/06x100, solid, Grey Cast Iron
Show all reviews
Reviews - 13
Article number: SKAD-2002
C.B.
05.06.2024
Sehr guter Preis über die Langlebigkeit kann ich noch keine Auskunft geben.
A.B.
20.11.2023
Zeitwertgerechte Reparatur
-
- Fitting Position: Rear Axle
- for PR number: 1KK
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Material: Grey Cast Iron
- Height [mm]: 39,5
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65,0
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Inner Diameter [mm]: 125
- Bore Ø [mm]: 16
- Drilled: no
- usable for vehicles to construction year: 2016 / 11
- Item number: SKAD-2002
- Manufacturer: STARK
- EAN number: 4059191000791
- Condition: New
Show OEM numbers of the product
Details
JURID 562053JC Brake disc Rear Axle, 232x9mm, 5x100, solid, Coated
Show all reviews
Reviews - 9
Article number: 562053JC
H.S.
04.05.2024
weil ich nur Produkte guter Qualität kaufe
S.O.
17.04.2024
Weil ich mit Jurid gute Erfahrungen habe
-
- Fitting Position: Rear Axle
- for PR number: 1KK, 2EK
- paired article number: 571906J
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Weight [kg]: 5,8
- Tightening Torque [Nm]: 120
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 25
- Packaging width [cm]: 25
- Packaging height [cm]: 9,5
- Drilled: no
- Item number: 562053JC
- Manufacturer: JURID
- EAN number: 3306437061605
- Condition: New
Show OEM numbers of the product
Details
REMSA 6547.00 Brake disc Rear Axle, 232x9mm, 5, solid
Article number: 6547.00
Reviews - 2
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- for PR number: 1KK, 2EK
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Weight [kg]: 2,7
- Test Mark: K.B.A.: 61210
- Drilled: no
- Item number: 6547.00
- Manufacturer: REMSA
- EAN number: 8427975155559
- Condition: New
Show OEM numbers of the product
Details
BLUE PRINT ADV184302 Brake disc Rear Axle, 232x9mm, 5x100, solid, Coated
Article number: ADV184302
Reviews - 3
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 41
- Minimum thickness [mm]: 7
- Weight [kg]: 2,6
- Number of mounting bores: 1
- Drilled: no
- Item number: ADV184302
- Manufacturer: BLUE PRINT
- EAN number: 5050063006278
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
BLUE PRINT ADV184325 Brake disc Rear Axle, 230x9mm, 5x100, solid, Coated
Article number: ADV184325
Reviews - 4
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40
- Minimum thickness [mm]: 7
- Weight [kg]: 2,6
- Number of mounting bores: 1
- for OE number: 2Q0 615 601 H
- Drilled: no
- Item number: ADV184325
- Manufacturer: BLUE PRINT
- EAN number: 5050063015898
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
VAICO V10-40069 Brake disc Rear Axle, 239x8,9mm, 5, 5x100, solid
Article number: V10-40069
Reviews - 1
-
- Drive Type: All-wheel Drive
- for PR number: 1KE
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Height [mm]: 33,4
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Weight [kg]: 3,32
- Brake Disc Hub Height [mm]: 25
- Packaging width [cm]: 26
- Packaging height [cm]: 7
- Packaging Depth [cm]: 26
- Drilled: no
- Item number: V10-40069
- Manufacturer: VAICO
- EAN number: 4046001279201
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
KRAFT 6050180 Brake disc Rear Axle, 232, 230,0x8,9mm, 5, solid
Article number: 6050180
Reviews - 5
- Fitting Position: Rear Axle
- Diameter [mm]: 232, 230,0
- Brake Disc Type: solid
- Height [mm]: 39,4
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Production Number: 6050180
- Drilled: no
- Item number: 6050180
- Manufacturer: KRAFT
- EAN number: 5900427206663
- Condition: New
Show OEM numbers of the product
Details
FERODO PREMIER Coat+ disc DDF929C Brake disc Rear Axle, 232x9mm, 5, solid, Coated
Show all reviews
Reviews - 29
Article number: DDF929C
S.K.
17.10.2023
Ferodo ist Erstausrüster beim Golf 8 ich denke da sagt alles zum Thema Qualität.Also wird's meinem Golf 4 nicht schaden. Am besten mit Eco friction Beläge
M.J.
09.08.2023
ist ein von mir bekannter Artikel mit guter Qualität
-
- Fitting Position: Rear Axle
- for PR number: 1KK, 2EK
- paired article number: FDB5026
- Product line: PREMIER Coat+ disc
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Weight [kg]: 2,90
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packaging length [cm]: 23,3
- Packaging width [cm]: 23,3
- Packaging height [cm]: 8,3
- Drilled: no
- Item number: DDF929C
- Manufacturer: FERODO
- EAN number: 4044197561193
- Condition: New
Show OEM numbers of the product
Details
ROADHOUSE 6547.00 Brake disc Rear Axle, 232x9mm, 5, solid
Show all reviews
Reviews - 8
Article number: 6547.00
M.H.
29.12.2021
Preiswert und gut
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Height [mm]: 39,3
- Brake Disc Thickness [mm]: 9
- for PR number: 1KK, 2EK
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Weight [kg]: 2,7
- Test Mark: K.B.A.: 61210
- Drilled: no
- Item number: 6547.00
- Manufacturer: ROADHOUSE
- EAN number: 2215210083357
- Condition: New
Show OEM numbers of the product
Details
METZGER 6110376 Brake disc Rear Axle, 232x8,9mm, 5x100, solid, Painted, Cross-hatch
Article number: 6110376
Reviews - 4
-
- for PR number: 1KK, 2EK
- Article number of recommended accessories: 6115001, 6115002
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Painted, Cross-hatch
- Height [mm]: 39,5
- Brake Disc Thickness [mm]: 8,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Inner Diameter [mm]: 124,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 6110376
- Manufacturer: METZGER
- EAN number: 4250032641740
- Condition: New
Show OEM numbers of the product
Additional information
with cross-grinding
Details
DELPHI BG3034C Brake disc Rear Axle, 232, 5, Coated, Untreated
Article number: BG3034C
Reviews - 5
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Surface: Coated
- Height [mm]: 39.3, 39,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Machining: Untreated
- Test Mark: E1 90R-02C0250 / 1192
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Item number: BG3034C
- Manufacturer: DELPHI
- EAN number: 5012759529638
- Condition: New
Show OEM numbers of the product
Details
SWAG 30 91 8488 Brake disc Rear Axle, 230x9mm, 5x100, solid, Coated
Article number: 30 91 8488
Reviews - 1
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 9
- for PR number: 1KK
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40,37
- Minimum thickness [mm]: 7
- Weight [kg]: 2,6
- Number of mounting bores: 1
- Drilled: no
- Item number: 30 91 8488
- Manufacturer: SWAG
- EAN number: 4044688529374
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
BREMBO COATED DISC LINE 08.7165.11 Brake disc 230x9mm, 5, solid, Coated
Show all reviews
Reviews - 78
Article number: 08.7165.11
E.K.
25.04.2024
Alles in Ordnung
M.F.
05.02.2024
gute Erfahrung mitBREMBO
- Product line: COATED DISC LINE
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.7165.11
- Manufacturer: BREMBO
- EAN number: 8020584018132
- Condition: New
Show OEM numbers of the product
Details
FEBI BILSTEIN 18488 Brake disc Rear Axle, 230x9mm, 5x100, solid, Coated
Show all reviews
Reviews - 43
Article number: 18488
B.N.
26.05.2024
Weil ich Febi eine gute Qalität besitzt
I.A.O.
02.05.2022
Gut Qualität ist
- Fitting Position: Rear Axle
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Coated
- Brake Disc Thickness [mm]: 9
- for PR number: 1KK
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 40,37
- Minimum thickness [mm]: 7
- Weight [kg]: 2,6
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 18488
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816184881
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
BOSCH 0 986 478 868 Brake disc Rear Axle, 232x9mm, 5x100, solid, Coated
Show all reviews
Reviews - 65
Article number: 0 986 478 868
O.S.
01.06.2024
Weil er vom Bosch ist.
C.P.
30.01.2024
Ich bin Mechaniker und habe gute Erfahrung mit der Marke Bosch gemacht
-
- Fitting Position: Rear Axle
- for PR number: 1KK, 2EK
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 39,4
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 15,8
- Drilled: no
- Item number: 0 986 478 868
- Manufacturer: BOSCH
- EAN number: 3165143118221
- Condition: New
Show OEM numbers of the product
Details
TOPRAN 107 683 Brake disc Rear Axle, 232x9mm, 5x100, solid, Coated
Article number: 107 683
Reviews - 1
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Surface: Coated
- Height [mm]: 40
- Brake Disc Thickness [mm]: 9
- for PR number: 1KK, 2EK
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Hub Diameter [mm]: 135,5
- Replace in pairs only
- Drilled: no
- Item number: 107 683
- Manufacturer: TOPRAN
- EAN number: 6156000000022
- Condition: New
Show OEM numbers of the product
Additional information
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Details
TRW DF2805 Brake disc Rear Axle, 230x9mm, 5x100, solid, Painted
Show all reviews
Reviews - 44
Article number: DF2805
D.W.
11.06.2024
Auf anraten eines Kfz-Meisters
M.S.
04.05.2024
Ich bin von TRW überzeugt
-
- Fitting Position: Rear Axle
- for PR number: 1KK, 2EK
- Diameter [mm]: 230
- Brake Disc Type: solid
- Surface: Painted
- Height [mm]: 39
- Brake Disc Thickness [mm]: 9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Thread Size: 16
- Colour: black
- Test Mark: E190R-02 C0190 / 0628
- Drilled: no
- Item number: DF2805
- Manufacturer: TRW
- EAN number: 3322937204946
- Condition: New
Show OEM numbers of the product
Details
Load more
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my AUDI TT Coupe (8N3) 1.8T 150hp / 110kW?
The cost of replacing brake discs ranges from 140 to 400 pounds
Find the best offers on