Actual offers of Anti-roll bar stabiliser kit VW Passat B5 Estate (3B5) 1.9 TDI Syncro/4motion 110 hp Diesel AFN
- Fitting Position: Rear Axle
- Rod / Strut: Coupling Rod
- Required quantity: 1
- Item number: 59820/2
- Manufacturer: MAPCO
- EAN number: 4043605368423
- Condition: New
es sind gute Teile. hervorragend
- Length [mm]: 71
- External Thread Size: M10 x 1
- Thread Length [mm]: 50
- Quality / Grade: 10.9
- Spanner Size: 16
- Bolt Head- / Nut Design: Male Hex
- Shaft Length [mm]: 12
- Surface: Oiled
- Fitting Position: Front Axle Left, Front Axle Right
- Weight [kg]: 0,1
- Item number: 21126
- Our price: 4,59 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816211266
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Length [mm]: 71
- External Thread Size: M10 x 1
- Thread Length [mm]: 50
- Quality / Grade: 10.9
- Spanner Size: 16
- Bolt Head- / Nut Design: Male Hex
- Shaft Length [mm]: 12
- Surface: Oiled
- Fitting Position: Front Axle Left, Front Axle Right
- Weight [kg]: 0,1
- Item number: 32 92 1126
- Our price: 7,16 €
- Manufacturer: SWAG
- EAN number: 4044688652034
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front axle both sides
- Length [mm]: 71
- Thread Length [mm]: 50
- Spanner Size: 16
- Bolt Head- / Nut Design: Male Hex
- Item number: 52642
- Our price: 3,27 €
- Manufacturer: AIC
- EAN number: 4046283526420
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: service@aic-germany.de
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 64
- Brake Disc Thickness [mm]: 9,9
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Machining: Untreated
- Test Mark: E1 90R-02C0100 / 1592
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG2746
- Manufacturer: DELPHI
- EAN number: 5012759427002
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LZ, 1ZJ
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 46,3
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Machining: Untreated
- Test Mark: E1 90R-02C0074 / 1474
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3198
- Manufacturer: DELPHI
- EAN number: 5012759064368
- Condition: New
-
- Fitting Position: Front Axle
- Construction Year to: 07 / 1998
- for PR number: 1LB, 1ZC
- Vehicle Identification Number (VIN) to: 3B_X_124107
- Diameter [mm]: 283
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 46,3
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Machining: Untreated
- Test Mark: E1 90R-02C0074 / 1597
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3199
- Manufacturer: DELPHI
- EAN number: 5012759064375
- Condition: New
-
- Construction Year from: 09 / 1998
- Vehicle Identification Number (VIN) to: 3B-Y-000000
- Fitting Position: Front Axle
- for PR number: 1LB, 1ZC
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Height [mm]: 46
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: A1371V
- Manufacturer: LPR
- EAN number: 8032532068618
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KD, 1KF
- Diameter [mm]: 245
- Brake Disc Type: solid
- Height [mm]: 64
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: A1401P
- Manufacturer: LPR
- EAN number: 8032532068649
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 1LZ, 1ZJ
- Diameter [mm]: 280
- Brake System: TRW
- Brake Disc Type: internally vented
- Height [mm]: 46
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- for article number: A1491V
- Drilled: no
- Item number: A1491V
- Manufacturer: LPR
- EAN number: 8032532068717
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KD, 1KF
- Diameter [mm]: 245
- Brake Disc Type: solid
- Height [mm]: 48
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: A1501P
- Manufacturer: LPR
- EAN number: 8032532068724
- Condition: New
- Supplementary Info: Original VAICO Quality
- Diameter [mm]: 269
- Brake Disc Type: Vented
- Height [mm]: 54,1
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Brake Disc Hub Height [mm]: 32,1
- Packaging width [cm]: 28
- Packaging height [cm]: 11
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-80109
- Manufacturer: VAICO
- EAN number: 4046001549854
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Vehicle Identification Number (VIN) to: 3B-X-124107
- for PR number: 1LB, 1ZC
- Fitting Position: Front Axle
- Diameter [mm]: 282,5
- Brake Disc Type: Vented
- Height [mm]: 46,5
- Brake Disc Thickness [mm]: 25,0
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 136,0
- Bore Ø [mm]: 15,3
- Drilled: no
- Item number: BAR25115
- Manufacturer: Barum
- EAN number: 4006633331395
- Condition: New
Ich habe mich für diese Beläge entschieden, da ich unzufrieden mit der Bremsleistung meiner bisher verbauten hinteren Bremse war. Ich kann sie nur empfehlen. Fühlbar mehr Bremsleistung und weniger Bremsstaubentwicklung. Top 👍
Gute Qualität, gute passgenauigkeit, kaum bremsstaub!
-
- for PR number: 1KD, 1KE, 1KF, 1KW
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0470-2820.2
- Our price: 40,01 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Surface: Oiled
- Height [mm]: 47,8
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Machining: Untreated
- Test Mark: E1 90R-02C0100 / 1592
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3381
- Manufacturer: DELPHI
- EAN number: 5012759086278
- Condition: New
-
- Fitting Position: Front Axle
- Construction Year from: 05 / 1999
- for PR number: 1LB, 1ZC, 1LE
- Vehicle Identification Number (VIN) from: 3B_X_600001
- Construction Year to: 07 / 1998
- Vehicle Identification Number (VIN) to: 3B_X_124107
-
- Fitting Position: Front Axle
- Construction Year from: 08 / 1998
- Construction Year to: 04 / 1999
- for PR number: 1LB, 1ZC
- Vehicle Identification Number (VIN) from: 3B_X_124108
- Vehicle Identification Number (VIN) to: 3B_X_600000
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 46,5
- Brake Disc Thickness [mm]: 24,9
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Machining: Untreated
- Test Mark: E1 90R-02C0289 / 1675
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG2745
- Manufacturer: DELPHI
- EAN number: 5012759426999
- Condition: New
-
- Vehicle Identification Number (VIN) from: 3B-X-124108
- Fitting Position: Front Axle
- for PR number: 1LB, 1LE, 1ZC
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Height [mm]: 46,2
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: V2004V
- Manufacturer: LPR
- EAN number: 8032532107249
- Condition: New
diese Marke gute Qualität hat.
wel ATE Erstausrüszer ist.
-
- for PR number: 1KD, 1KE, 1KF, 1KW
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: excl. wear warning contact
- Brake System: Lucas / TRW
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 26,12 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
Weil es von guter Qualität.
-
- Vehicle Identification Number (VIN) to: 3B-X-600000
- for PR number: 1LB, 1ZC
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- MAPP code available
- Item number: 13.0460-7077.2
- Our price: 63,42 €
- Manufacturer: ATE
- EAN number: 4006633279741
- Condition: New
Das Beste marke ATE
Qualität ist gut
-
- Vehicle Identification Number (VIN) from: 3B-Y-000001
- for PR number: 1LB, 1ZC, 1LE, 1LT
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: incl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 19,8
- Number of wear indicators [per axle]: 2
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Number of pads: 8
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 200
- MAPP code available
- Item number: 13.0460-7110.2
- Our price: 50,62 €
- Manufacturer: ATE
- EAN number: 4006633068994
- Condition: New