Actual offers of Anti-roll bar stabiliser kit BMW 3 Touring (E91) 320i 2.0 163 hp Petrol N43 B20 A
- Rod / Strut: Coupling Rod
- Fitting Position: Front Axle Left, Front Axle Right
- Thread Size: M10x1,5
- Length [mm]: 290
- Required quantity: 1
- Item number: 2067R0027
- Manufacturer: RIDEX
- EAN number: 4059191779024
- Condition: New
- Trim Level: EXC. XI - XD
- Rod / Strut: Coupling Rod
- Fitting Position: Front Axle Left, Front Axle Right
- Thread Size: M10x1,5
- Length [mm]: 290
- Required quantity: 1
- Item number: SKRKS-4420026
- Manufacturer: STARK
- EAN number: 4059191779017
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right
- reinforced version
- Rod / Strut: Coupling Rod
- Length [mm]: 290
- Thread Size: M10x1,5
- Required quantity: 1
- Quality: HPS standard
- Item number: 53657HPS
- Manufacturer: MAPCO
- EAN number: 4043605840691
- Condition: New
- Supplementary Info: Original VAICO Quality
- Fitting Position: Rear Axle
- Diameter [mm]: 324
- Brake Disc Type: Vented
- Height [mm]: 67,1
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- Brake Disc Hub Height [mm]: 45,1
- Packaging width [cm]: 34
- Packaging height [cm]: 14
- Packaging Depth [cm]: 34
- Drilled: no
- Item number: V20-80083
- Manufacturer: VAICO
- EAN number: 4046001550744
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 17,3
- Height 1 [mm]: 49,7
- Height 2 [mm]: 48,1
- Width 2 [mm]: 123,0
- Width 1 [mm]: 123,0
- Test Mark: E1 90R-02A0333 / 0281, E1 90R-02A0652 / 0225
- MAPP code available
- Article number of recommended accessories: 24.8190-0265.2, 24.8190-0285.2, 24.8190-0296.2
- Observe dimensions
- Item number: 13.0460-7217.2
- Our price: 49,35 €
- Manufacturer: ATE
- EAN number: 4006633270038
- Condition: New
-
- Construction Year from: 10 / 2009
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 66,0
- Brake Disc Thickness [mm]: 20,0
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 160,8
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296 / 0746
- Bore Ø [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0195.1
- Manufacturer: ATE
- EAN number: 4006633269797
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 73,1
- Brake Disc Thickness [mm]: 24,0
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 152,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0995
- Bore Ø [mm]: 16,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0124-0203.1
- Manufacturer: ATE
- EAN number: 4006633319980
- Condition: New
-
- Construction Year from: 09 / 2007
- Fitting Position: Rear Axle
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles with active steering
- Diameter [mm]: 300
- Brake Disc Type: Vented, internally vented
- Surface: Coated
- Height [mm]: 66,2
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Machining: High-carbon
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 14,7
- Drilled: no
- Item number: 0 986 479 263
- Manufacturer: BOSCH
- EAN number: 4047024226968
- Condition: New
-
- Construction Year from: 09 / 2009
- Fitting Position: Rear Axle
- paired article number: FDB1807
- Product line: PREMIER
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 66
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 161
- Weight [kg]: 13,26
- Tightening Torque [Nm]: 120
- Bore Ø [mm]: 75
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Drilled: no
- Item number: DDF1549
- Manufacturer: FERODO
- EAN number: 4044197419654
- Condition: New
-
- Fitting Position: Rear Axle
- Trim Level: STANDARD
- Payload: for increased payload
- Version: STANDARD
- paired article number: FDB1807
- Product line: PREMIER
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 66
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 185
- Weight [kg]: 12,91
- Tightening Torque [Nm]: 120
- Bore Ø [mm]: 75
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 4,6
- Drilled: no
- Item number: DDF1697
- Manufacturer: FERODO
- EAN number: 4044197502370
- Condition: New
-
- Fitting Position: Front Axle
- paired article number: FDB4191
- Product line: PREMIER
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 73,7
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Weight [kg]: 17,88
- Tightening Torque [Nm]: 120
- Bore Ø [mm]: 79
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 31,2
- Packaging width [cm]: 31,2
- Packaging height [cm]: 5,4
- Drilled: no
- Item number: DDF1717
- Manufacturer: FERODO
- EAN number: 4044197514960
- Condition: New
-
- Construction Year from: 09 / 2007
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Material: Low-Metallic
- Thickness [mm]: 16,6
- Height 1 [mm]: 47
- Height 2 [mm]: 48,3
- Width [mm]: 123,2
- WVA Number: 23926
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Item number: 0 986 494 272
- Our price: 29,61 €
- Manufacturer: BOSCH
- EAN number: 4047023107930
- Condition: New
-
- Braking System: for vehicles with Performance brakes
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: Brembo
- Thickness [mm]: 16,9
- Height [mm]: 73,5
- Width [mm]: 164,7
- Test Mark: E1 90R-011134 / 1134
- MAPP code available
- Article number of recommended accessories: 13.0460-0238.2, 24.8190-0287.2, 24.8190-0288.2
- Observe dimensions
- Item number: 13.0460-4848.2
- Our price: 71,98 €
- Manufacturer: ATE
- EAN number: 4006633324939
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,3
- Height [mm]: 68,3
- Width [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0269
- MAPP code available
- Article number of recommended accessories: 24.8190-0264.2, 24.8190-0266.2, 24.8190-0267.2, 24.8190-0283.2, 24.8190-0284.2, 24.8190-0287.2, 24.8190-0288.2, 24.8190-0297.2
- Observe dimensions
- Item number: 13.0460-7238.2
- Our price: 84,67 €
- Manufacturer: ATE
- EAN number: 4006633311540
- Condition: New
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 17,3
- Height 1 [mm]: 49,7
- Height 2 [mm]: 48,1
- Width 2 [mm]: 123,0
- Width 1 [mm]: 123,0
- Test Mark: E1 90R-02A0258 / 0282
- MAPP code available
- Article number of recommended accessories: 24.8190-0265.2, 24.8190-0285.2, 24.8190-0296.2
- Observe dimensions
- Item number: 13.0470-7217.2
- Our price: 61,45 €
- Manufacturer: ATE
- EAN number: 4006633340540
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Quantity Unit: Axle Set
- Product line: Ceramic
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,3
- Height [mm]: 68,3
- Width [mm]: 155,1
- Test Mark: E1 90R-02A0258 / 0270
- MAPP code available
- Article number of recommended accessories: 24.8190-0264.2, 24.8190-0266.2, 24.8190-0267.2, 24.8190-0283.2, 24.8190-0284.2, 24.8190-0287.2, 24.8190-0288.2, 24.8190-0297.2
- Observe dimensions
- Item number: 13.0470-7238.2
- Our price: 117,27 €
- Manufacturer: ATE
- EAN number: 4006633340595
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year to: 09 / 2009
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 66,1
- Brake Disc Thickness [mm]: 20,0
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 185,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296 / 1266
- Bore Ø [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0204.1
- Manufacturer: ATE
- EAN number: 4006633311250
- Condition: New
-
- Construction Year from: 09 / 2007
- Fitting Position: Rear Axle
- Braking System: for vehicles without Performance brakes
- Vehicle Equipment: for vehicles without active steering
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 66,2
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 14,7
- Drilled: no
- Item number: 0 986 479 218
- Manufacturer: BOSCH
- EAN number: 4047024202092
- Condition: New
-
- Construction Year from: 09 / 2007
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 73,1
- Brake Disc Thickness [mm]: 23,9
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 16,3
- Drilled: no
- Item number: 0 986 479 381
- Manufacturer: BOSCH
- EAN number: 4047024309555
- Condition: New
-
- Construction Year from: 09 / 2007
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Material: Low-Metallic
- Thickness [mm]: 19,8
- Height [mm]: 68,5
- Width [mm]: 155,3
- WVA Number: 23312
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with piston clip
- Item number: 0 986 494 354
- Our price: 45,25 €
- Manufacturer: BOSCH
- EAN number: 4047024737204
- Condition: New