Actual offers of Abs ring MERCEDES-BENZ C-Class Saloon (W202) C 43 AMG 4.3 306 hp Petrol M 113.944
- Inner Diameter [mm]: 92
- Material: Steel
- Number of Teeth, ABS ring: 48
- Fitting Position: Rear Axle Left, Rear Axle Right
- Weight [kg]: 0,030
- Observe service information
- Diameter [mm]: 96
- Item number: 100505
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224005057
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Width [mm]: 11
- Number of Teeth, ABS ring: 48
- Inner Diameter [mm]: 92
- Supplementary Info: Original VEMO Quality
- Diameter [mm]: 96
- Item number: V30-92-9978
- Manufacturer: VEMO
- EAN number: 4046001946387
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 96
- Number of Teeth, ABS ring: 48
- Material: Steel
- Fitting Position: Rear Axle Left, Rear Axle Right
- Weight [kg]: 0,030
- Diameter [mm]: 92
- Item number: 10 10 0505
- Manufacturer: SWAG
- EAN number: 4054228005053
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 58,5
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Machining: Untreated
- Test Mark: E1 90R-02C0438 / 1623
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Drilled: no
- Item number: BG3726
- Manufacturer: DELPHI
- EAN number: 5012759285060
- Condition: New
-
- Construction Year to: 04 / 2000
- Fitting Position: Rear Axle
- Diameter [mm]: 300,1
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 55,4
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Fulfils ECE norm: ECE-R90
- Drill Diameter, up to [mm]: 13,2
- Drilled: no
- Item number: 0 986 479 653
- Manufacturer: BOSCH
- EAN number: 4047024749412
- Condition: New
price incl. 19% VAT
excl. delivery costs
Qualität hat einen Namen
-
- Construction Year from: 09 / 1997
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 15,7
- Height [mm]: 69,5
- Width [mm]: 61,7
- Test Mark: E1 90R-02A0498 / 0585
- MAPP code available
- Article number of recommended accessories: 13.0460-0236.2, 13.0460-0239.2, 24.8190-0401.2, 24.8190-0410.2
- Observe dimensions
- Item number: 13.0460-4047.2
- Our price: 39,45 €
- Manufacturer: ATE
- EAN number: 4006633134408
- Condition: New
Perfekt wie original
-
- Construction Year from: 09 / 1997
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 20,5
- Height [mm]: 73,5
- Width [mm]: 194,3
- Test Mark: E1 90R-01517 / 657
- MAPP code available
- Article number of recommended accessories: 24.8190-0106.2, 24.8190-0107.2, 24.8190-0232.2, 24.8190-0233.2, 24.8190-0234.2, 24.8190-0418.2, 24.8190-0419.2, 24.8190-0425.2, 24.8190-0955.2
- Observe dimensions
- Item number: 13.0460-7183.2
- Our price: 101,47 €
- Manufacturer: ATE
- EAN number: 4006633118019
- Condition: New
-
- Construction Year from: 09 / 1997
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Product line: Ceramic
- Wear Warning Contact: prepared for wear indicator, excl. wear warning contact
- Brake System: ATE
- Thickness [mm]: 15,7
- Height [mm]: 69,5
- Width [mm]: 61,7
- Test Mark: E1 90R-02A0258 / 0586
- MAPP code available
- Article number of recommended accessories: 13.0460-0236.2, 13.0460-0239.2, 24.8190-0401.2, 24.8190-0410.2
- Observe dimensions
- Item number: 13.0470-4047.2
- Our price: 56,48 €
- Manufacturer: ATE
- EAN number: 4006633339735
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year to: 04 / 2000
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Material: Low-Metallic
- Thickness [mm]: 15,4
- Height [mm]: 69,7
- Width [mm]: 61,8
- WVA Number: 21305
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Item number: 0 986 460 965
- Our price: 20,12 €
- Manufacturer: BOSCH
- EAN number: 3165143663592
- Condition: New
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: ATE
- Thickness [mm]: 20
- Height [mm]: 74
- Width [mm]: 195
- WVA Number: 21484, 21485
- Test Mark: R90 Homologated
- Weight [kg]: 3,08
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 20,32
- Packaging width [cm]: 12,192
- Packaging height [cm]: 7,874
- Item number: FDB1001
- Our price: 68,17 €
- Manufacturer: FERODO
- EAN number: 5016687113877
- Condition: New
- Quantity Unit: Axle Set
- Product line: PREMIER ECO FRICTION
- Fitting Position: Rear Axle
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Brake System: ATE
- Thickness [mm]: 16
- Height [mm]: 69
- Width [mm]: 62
- WVA Number: 21305
- Test Mark: R90 Homologated
- Weight [kg]: 0,85
- Quantity per axle: 4
- Packing Type: Box
- Packaging length [cm]: 15
- Packaging width [cm]: 10,6
- Packaging height [cm]: 4,4
- Item number: FDB799
- Our price: 29,78 €
- Manufacturer: FERODO
- EAN number: 5016687060171
- Condition: New
- Product line: COATED DISC LINE
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Surface: Coated
- Height [mm]: 56
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.A742.11
- Manufacturer: BREMBO
- EAN number: 8020584019863
- Condition: New
Erstausrüsterqualität
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Teves
- Thickness [mm]: 16
- Height [mm]: 70
- Width [mm]: 62
- WVA Number: 21305
- Item number: P 50 017
- Our price: 23,94 €
- Manufacturer: BREMBO
- EAN number: 8020584053898
- Condition: New
- Product line: PREMIER
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 55,2
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 14,15
- Tightening Torque [Nm]: 110
- Bore Ø [mm]: 67
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Drilled: no
- Item number: DDF1764
- Manufacturer: FERODO
- EAN number: 4044197515424
- Condition: New
-
- Construction Year from: 09 / 1997
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Surface: Coated
- Height [mm]: 55,3
- Brake Disc Thickness [mm]: 22,0
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 164,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296 / 0783
- Bore Ø [mm]: 13,2
- Drilled: no
- Item number: 24.0122-0228.1
- Manufacturer: ATE
- EAN number: 4006633222228
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 04 / 2000
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Material: Low-Metallic
- Thickness [mm]: 20,5
- Height [mm]: 73,5
- Width [mm]: 194,5
- WVA Number: 21484
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Item number: 0 986 424 649
- Our price: 49,71 €
- Manufacturer: BOSCH
- EAN number: 3165143722473
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Thickness [mm]: 21
- Height [mm]: 73,5
- Width [mm]: 195
- Item number: BP1053
- Our price: 94,41 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593658783
- Condition: New
- Quantity Unit: Axle Set
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear indicator
- Thickness [mm]: 16
- Height [mm]: 69,5
- Width [mm]: 62
- Item number: BP706
- Our price: 35,65 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593330726
- Condition: New
Priorität = Qualität !
- Product line: PREMIER
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Surface: Oiled
- Height [mm]: 46,5
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 13,04
- Tightening Torque [Nm]: 110
- Test Mark: R90 homologated
- Bore Ø [mm]: 67
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 29
- Packaging width [cm]: 29
- Packaging height [cm]: 10
- Drilled: no
- Item number: DDF1135
- Manufacturer: FERODO
- EAN number: 5016687266795
- Condition: New
sehr gute Erfahrung habe, mit Ersatzteilen der Firma Brembo
- Quantity Unit: Axle Set
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article / Supplementary Info: without accessories
- Brake System: Teves
- Thickness [mm]: 21
- Height [mm]: 74
- Width [mm]: 195
- WVA Number: 21485, 21484
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Item number: P 06 019
- Our price: 46,46 €
- Manufacturer: BREMBO
- EAN number: 8020584050194
- Condition: New